Interfacial tension and fluorine evolution on a carbon anode

During electrolysis of molten KF-2HF, strongly adherent fluorine bubbles are generated at the surface of carbon anode. The current was passing even if the horizontal anode was fully covered with gas film. The formation and growth of gas bubbles were studied by transient electrochemical techniques. It was observed that the fluorine bubbles do not have the spherical cap shape predicted by the classical theory. The curvature radius of the interface profile is not constant, the edge of the bubble being flat with a contact angle close to zero. The results are interpreted in the frame of a model which takes into account the predominant role of the interfacial properties.     

Independence versus indetermination: basis of two canonical clustering criteria

Advances in Data Analysis and Classification - This paper aims at comparing two coupling approaches as basic layers for building clustering criteria, suited for modularizing and clustering very...     

Thermochemical excess properties of multicomponent systems: Representation and estimation from binary mixing data

A general equation for the estimation of thermodynamic excess properties of multicomponent systems from observed excess properties of the various binary combinations of the components has been developed, based on a simple model of the multicomponent system. This estimation takes the form $$\Delta \bar Z_{12...N}^{ex} = \sum\limits_{i = 1}^N {\sum\limits_{j > i}^N {(X_i + X_j )(f_i + f_j )(\Delta \bar Z_{ij}^{ex} )^* } } $$ in which \((\Delta \bar Z_{ij}^{ex} )^* \) is the molar excess property (enthalpy, entropy, volume, free energy, etc.), of the binary system with components at the same molar ratio as in the multicomponent system, and f_i, f_j are weighted mole fractions using weighting factors based on the excess properties of the binary systems. The important features of this equation are: it is applicable to a broad range of thermodynamic properties, its application to both integral and differential mixing properties is independent of the manner in which the binary mixing data is represented (Redlich-Kister equation, Wilson equation, etc.), and it provides reasonably accurate predictions ranging from quite good for simple systems of nonspecific interactions to only fair for associated solutions. This equation is recommended as a point-of-departure for mathematical representation of experimental data for multicomponent systems.     

Formation of the monoanion [Ar*P(BH3)(mu-BH2)2H]- with a symmetrically bridging hydride from the attempted synthesis of the dianion [Ar*P(BH3)3]2-

Addition of an excess of BunLi to the bis(borano)phosphide complex [Ar*PH(BH3)2]-Li+ 1 (Ar* = 2,4,6-tri-tert-butylphenyl) and subsequent treatment with BH3, gives the anionic complex [Ar*P(BH3)(mu-BH2)2H]-Li+ 2 instead of the expected tris(borano)phosphide dilithium, [Ar*P(BH3)3]2-2Li+ 3.     

End-labeled free-solution electrophoresis of DNA

DNA is a free-draining polymer. This subtle but "unfortunate" property of highly charged polyelectrolytes makes it impossible to separate nucleic acids by free-flow electrophoresis. This is why one must typically use a sieving matrix, such as a gel or an entangled polymer solution, in order to obtain some electrophoretic size separation. An alternative approach consists of breaking the charge to friction balance of free-draining DNA molecules. This can be achieved by labeling the DNA with a large, uncharged molecule (essentially a hydrodynamic parachute, which we also call a drag-tag) prior to electrophoresis; the resulting methodology is called end-labeled free-solution electrophoresis (ELFSE). In this article, we review the development of ELFSE over the last decade. In particular, we examine the theoretical concepts used to predict the ultimate performance of ELFSE for single-stranded (ssDNA) sequencing, the experimental results showing that ELFSE can indeed overcome the free-draining issue raised above, and the technological advances that are needed to speed the development of competitive ELFSE-based sequencing and separation technologies. Finally, we also review the reverse process, called free-solution conjugate electrophoresis (FSCE), wherein uncharged polymers of different sizes can be analyzed using a short DNA molecule as an electrophoretic engine.     

Modeling of submicrometer aerosol penetration through sintered granular membrane filters

We present a deep-bed aerosol filtration model that can be used to estimate the efficiency of sintered granular membrane filters in the region of the most penetrating particle size. In this region the capture of submicrometer aerosols, much smaller than the filter pore size, takes place mainly via Brownian diffusion and direct interception acting in synergy. By modeling the disordered sintered grain packing of such filters as a simple cubic lattice, and mapping the corresponding 3D connected pore volume onto a discrete cylindrical pore network, the efficiency of a granular filter can be estimated, using new analytical results for the efficiency of cylindrical pores. This model for aerosol penetration in sintered granular filters includes flow slip and the kinetics of particle capture by the pore surface. With a unique choice for two parameters, namely the structural tortuosity and effective kinetic coefficient of particle adsorption, this semiempirical model can account for the experimental efficiency of a new class of "high-efficiency particulate air" ceramic membrane filters as a function of particle size over a wide range of filter thickness and texture (pore size and porosity) and operating conditions (face velocity).     

Persistent (amino)(silyl)carbenes

(Amino)(silyl)carbenes, prepared by substitution reactions at a carbene center, can survive several days at 0 degrees C. These species are not push-pull carbenes as their phosphino analogues and therefore are excellent ligands for transition-metal centers.     

Comparison of EI and metastable atom bombardment ionization for the identification of polyurethane thermal degradation products

Polyurethanes are widely used in the manufacture of commercial products such as foams and paints. During combustion, these polymers can generate isocyanates, which induce adverse health effects. Polymer pyrolysis (Py) hyphenated with mass spectrometry (MS) allows the investigation of polymer thermal degradation over time/temperature. A diphenylmethanediisocyanate (MDI) polyurethane foam was analyzed with electron ionization (EI) and metastable atom bombardment (MAB) ionization at a pyrolysis temperature of 400 °C. The recently introduced MAB ionization source uses discrete energy stored in metastable atoms of gases to ionize the analytes. This characteristic allows modulation of the ionization energy by simply changing the ionization gas. The extensive fragmentation of molecular ions observed using EI 70 eV is not totally eliminated with EI 10 eV. However, only molecular ions are observed with MAB using N₂ as the ionization gas. Temperature gradients were used to separate the products generated during the thermal degradation of a 1,6-hexamethylenediisocyanate (HDI) polyurethane paint. The analysis of mass spectra was facilitated owing to a selective desorption of pyrolysis products. Furthermore, changing the MAB ionization gas allows elucidation of the structure of the pyrolysis products by controlling the extent of their fragmentation. During these experiments, isocyanic acid, methyleneisocyanate, ethyleneisocyanate, propylisocyanate and butylisocyanate were detected.     

Spectrometrie de Masse D'ozonides Aliphatiques

A primary cleavage of aliphatic ozonides by electron-impact, implying O? O and C? C bond breaking, is described. This mode of degradation, which is not observed for aromatic ozonides, is fav oured by electron releasing substituents. For the cis and trans 4-methyl-2pentene ozonides, the ionization potentials are 8.81 and 8.86 (±0.5) eV, respectively. Two formation thresholds are observed for the [RCHO₂]⁺ion which are interpreted in terms of different modes of ozonide cleavage.