Inter-laboratory exercise with an aim to compare methods for 90Sr and 239,240Pu determination in environmental soil samples

In order to deliver reliable results for a multitude of different scenarios, e.g. emergency preparedness, environmental monitoring, nuclear decommissioning and waste management, there is a constant process of method development in the field of radioanalytical chemistry. This work presents the results of a method comparison exercise aimed at quantifying ⁹⁰Sr and ^239,240Pu in environmental soil samples, with the intention of evaluating the performance and applicability of different methods. From the methods examined in this work, recommendations are given in order to find a radioanalytical measurement procedure, for ⁹⁰Sr and ^239,240Pu analysis, which is fit-for-purpose for a particular scenario.

     

Effects of Pressure Oscillations on Drainage in an Elastic Porous Medium

The effects of seismic stimulation on the flow of two immiscible fluids in an elastic synthetic porous medium is experimentally investigated. A wetting fluid is slowly evacuated from the medium, while a pressure oscillation is applied on the injected non- wetting fluid. The amplitude and frequency of the pressure oscillations as well as the evacuation speed are kept constant throughout an experiment. The resulting morphology of the invading structure is found to be strongly dependent on the interplay between the amplitude and the frequency of the applied pressure oscillations and the elasticity of the porous medium. Different combinations of these properties yield morphologically similar structures, allowing a classification of structures that is found to depend on a proposed dimensionless number.     

Electron Capture Dissociation of Divalent Metal-adducted Sulfated N-Glycans Released from Bovine Thyroid Stimulating Hormone

Sulfated N-glycans released from bovine thyroid stimulating hormone (bTSH) were ionized with the divalent metal cations Ca²⁺, Mg²⁺, and Co by electrospray ionization (ESI). These metal-adducted species were subjected to infrared multiphoton dissociation (IRMPD) and electron capture dissociation (ECD) and the corresponding fragmentation patterns were compared. IRMPD generated extensive glycosidic and cross-ring cleavages, but most product ions suffered from sulfonate loss. Internal fragments were also observed, which complicated the spectra. ECD provided complementary structural information compared with IRMPD, and all observed product ions retained the sulfonate group, allowing sulfonate localization. To our knowledge, this work represents the first application of ECD towards metal-adducted sulfated N-glycans released from a glycoprotein. Due to the ability of IRMPD and ECD to provide complementary structural information, the combination of the two strategies is a promising and valuable tool for glycan structural characterization. The influence of different metal ions was also examined. Calcium adducts appeared to be the most promising species because of high sensitivity and ability to provide extensive structural information.

Structure and Polymorphism of M(thd)3 (M = Al,Cr, Mn,Fe, Co,Ga, and In)

Formation, crystal structure, polymorphism, and transition between polymorphs are reported for M(thd)₃, (M = Al, Cr, Mn, Fe, Co, Ga, and In) [(thd)^– = anion of H(thd) = C₁₁H₂₀O₂ = 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione]. Fresh crystal‐structure data are provided for monoclinic polymorphs of Al(thd)₃, Ga(thd)₃, and In(thd)₃. Apart from adjustment of the M–O_k bond length, the structural characteristics of M(thd)₃ complexes remain essentially unaffected by change of M. Analysis of the M–O_k, O_k–C_k, and C_k–C_k distances support the notion that the M–O_k–C_k–C_k–C_k–O_k– ring forms a heterocyclic unit with σ and π contributions to the bonds. Tentative assessments according to the bond‐valence or bond‐order scheme suggest that the strengths of the σ bonds are approximately equal for the M–O_k, O_k–C_k, and C_k–C_k bonds, whereas the π component of the M–O_k bonds is small compared with those for the O_k–C_k, and C_k–C_k bonds. The contours of a pattern for the occurrence of M(thd)₃ polymorphs suggest that polymorphs with structures of orthorhombic or higher symmetry are favored on crystallization from the vapor phase (viz. sublimation). Monoclinic polymorphs prefer crystallization from solution at temperatures closer to ambient. Each of the M(thd)₃ complexes subject to this study exhibits three or more polymorphs (further variants are likely to emerge consequent on systematic exploration of the crystallization conditions). High‐temperature powder X‐ray diffraction shows that the monoclinic polymorphs convert irreversibly to the corresponding rotational disordered orthorhombic variant above some 100–150 °C (depending on M). The orthorhombic variant is in turn transformed into polymorphs of tetragonal and cubic symmetry before entering the molten state. These findings are discussed in light of the current conceptions of rotational disorder in molecular crystals.     

Emulsions of Heavy Crude Oils. II. Viscous Responses and Their Influence on Emulsion Stability Measurements

The stability of 30 heavy crude oil emulsions was studied in a parallel-plate laboratory coalescer (DC field). Particularly, viscous responses and their influence on the emulsion stability measurements were investigated. In addition to highlighting previous results from the same experimental setup and discussing these based on recent experience, new results at different temperatures and volume fractions of water were presented. A new semi-empirical model for the characteristic time of the destabilization process was presented. The electrical forces were modelled with a point-dipole approximation and the hydrodynamic resistance to droplet transport was modelled with an empirical term including the logarithmic viscosity of the oil phase. The new model clearly performed much better than the previous model, particularly for very viscous crude oils. Studies of the performance of industrial electrocoalescers have showed that simple electrostatic theory can potentially explain complex separation phenomena when the resistance to the coalescence step is reduced by an efficient demulsifier. The ultimate goal is to build a model for both the laboratory setup and the industrial coalescer so that laboratory experiments can be used to predict the behavior of the industrial process.     

Influence of Interfacial Tension on Seeded Calcium Carbonate Scale Precipitation: Effect of Adsorbed Asphaltenes

Clay particles with adsorbed asphaltenes, which are commonly found in produced water, have been used as seed particles during precipitation of calcium carbonate in order to determine whether such particles may influence the kinetics of precipitation. The results show that the presence of the adsorbed asphaltenes accelerates the precipitation, and there is also a significant difference between different types of adsorbed asphaltenes. The adsorption of asphaltenes at the seed surface leads to a significant increase in the interfacial tension between the seed surface and the aqueous solution, and calcium carbonate therefore precipitates at the seed surface in order to reduce this high interfacial tension.     

Stability of Water/Crude Oil Systems Correlated to the Physicochemical Properties of the Oil Phase

A characterization of 30 crude oils has been performed to determine the relative level of influence that individual parameters have over the overall stability of w/o emulsions. The crude oils have been analyzed with respect to bulk and interfacial properties and the characteristics of their w/o emulsions. The parameters include compositional properties, acidity, spectroscopic signatures in the infrared and near‐infrared region, density, viscosity, molecular weight, interfacial tension, dilational relaxation, droplet size distribution, and stability to gravitationally and electrically induced separation. As expected, a strong covariance between several physicochemical properties was found. Near‐infrared spectroscopy proved to be an effective tool for crude oil analysis. In particular, we have showed the importance of the hydrodynamic resistance to electrically‐induced separation (static) in heavy crude oil‐water emulsions. A rough estimate of the drag forces and dielectrophoretic forces seemed to capture the difference between the 30 crude oils. Given enough time, water‐in‐heavy oil emulsions could be destabilized even at very low electric field magnitude (d.c.). When droplets approach each other in an inhomogeneous electric field, strong dielectrophoretic forces disintegrate the films and result in coalescence. The relative contribution from film stability to the overall emulsion stability may therefore be very different in a gravitational field compared to that in an electrical field.     

Analysis of Crude Oils by Frequency Domain Spectroscopy—Effect of Composition and Physical Properties on Conductivity and Dielectric Response

The dielectric properties and the composition of fourteen light to heavy crude oils have been analyzed. Frequency domain spectroscopy (FDS) has been used in order to determine their dielectric response in the frequency range 0.01 to 1000 Hz. For all the crude oils, over the whole frequency range under study, dielectric loss, ?″, shows a linear dependence of frequency indicating a pure direct current (DC) conductivity. As temperature is gradually increased, the dielectric loss, ?″, increases as well, showing a strong temperature dependence. The storage modulus, ?′, shows an explicit behaviour at low frequency that could be due to adsorption of oil components onto the electrodes. We tried to correlate some physical and chemical properties (density, viscosity, SARA, TAN, water content) of the studied crude oils with their conductivity measured at various temperatures. No correlation was found and different hypothesis are suggested by the authors to explain this phenomenon.