Separation of friend erythroleukaemic cell histones and high-mobility-group proteins by reversed-phase high-performance liquid chromatography

A procedure for the rapid separation of histones and high-mobility-group (HMG) proteins from Friend erythroleukaemic cells (line F4N) by reversed-phase high-performance liquid chromatography is reported. By using a Nucleosil 300-5 C₄, column and a multistep water—acetonitrile gradient containing 0.1% trifluoroacetic acid, the HMG-1 and HMG-2 proteins, several his subtractions including H1⁰, H4, H2B, two H2A variants and two H3 subtractions were separated. Under changed conditions, by applying a varied acetonitrile gradient system, even two H2B variants were fractionated. The methods described seem to be a real alternative to the time-consuming polyacrylamide gel electrophoresis.     

Photoelectron spectroscopy of heterocycles. Azaindenes and azaindolizines

The HeI photoelectron (PE) spectra of indole ( 1 ), benzimidazole ( 2 ), indazole ( 3 ), 3-chloro-indazole ( 4 ), imidazo[1,2-b]pyridazine ( 5 ), 6-chloroimidazo[1,2-b]pyridazine ( 6 ), 2-phenyl-imidazo[1,2-b]pyridazine ( 7 ), 2-phenyl-6-chloroimidazo[1,2-b]pyridazine ( 8 ), tetrazolo[1,2-a]-pyridine ( 9 ) and 8-cyanotetrazolo[1,5-a]pyridine ( 10 ) have been recorded. The spectra of 2–10 are of special interest for studying lone pair interactions. The assignment of the PE spectra submitted here, conjointly with the electronic structure of the studied compounds is discussed on the basis of molecular orbital calculations.     

Zur struktur von CaPdF4, CdPdF4, HgPdF4 und HpPdF2

Single crystals of CaPdF₄ (purple) and CdPdF₄ (dark blue) have been obtained by heating CaF₂ (CdF₂) with PdF₂ at 820°C (900°C) for ca. 20–30 d in sealed Pd (Pt) tubes. CaPdF₄ crystallizes tetragonal (KBrF₄-Type) with a = 5.52₁, c = 10.57₀ Å (space group I4/mcm ? D^18_4h, No. 140) Z = 4, 283 unique reflexions, R = 0.083; R_w = 0.079, CdPdF₄ cubic (CaF₂-variant) with a = 5.40₃ Å (space group Pa3 ? T^6_h, No. 205) Z = 4, 165 unique reflexions, R = 0.047, R_w = 0.032. The high pressure modification of PdF₂, obtained by heating PdF₂ in closed Pt-tubes under a pressure of ≈ 60 kbar and ‘HgPdF₄’, both black, a = 5.32₇ Å and a = 5.43 Å are isotypic. CaPdF₄ is diamagnetic, CdPdF₄ and HPPdF₂ are antiferromegnetic.     

Pyridazines. LXV. Reactions of some I-phenacylazolopyridazinium halides with 2,3-diphenylcyclopropenone, -thione,or hydrazine

I-Phenacylazolopyridazinium bromides reacted with 2,3-diphenylcyclopropenone or -thione in the presence of triethylaminc to give 3,4,6-triphenyl-2-pyrone or -2-thiopyrone and the corresponding azolopyridazine. Quaternized azolopyridazines reacted with hydrazine to give either 3,6-diphenylpyridazine and the corresponding azoloazine or hy ring opening of the azine part to give 1-methyl-2-(pyrazolyl-5′)imidazole.     

Transition from a Bloch-Wilson to a free-electron density of states in Zn(n)- clusters

We present photoelectron spectroscopy studies on Zn(n) (-) in the size range of n=3-117. We show that zinc clusters exhibit a distinct transition in their electronic structure as a function of size. At small sizes (up to n=18) the clusters follow the Bloch-Wilson picture of the development of a metal from closed-shell atoms, exhibiting a gradual decrease of the gap between the fully occupied s band and the empty p band. For large sizes (n approximately or > 32) the band overlap allows the valence electrons to fully delocalize. This leads to an almost perfect free-electron density of states, as is demonstrated by discussing the spectra in the light of standard free-electron models and by comparison to the results obtained on sodium clusters.     

Einsatz der flammenlosen Atom-Absorption (Graphitrohrküvette) zur Bestimmung von Kupferspuren in Stahl und anderen Metall-Legierungen nach Extraktion

The determination of small and smallest amounts of copper in steel and other metal alloys by atomic absorption spectroscopy was investigated. It has been found, that the interferences caused by accompanying elements in the determination in aqueous solution with the flame can be completely removed by extracting the copper with Pb-DDTC in chloroform and determining this extract with the heated graphite atomizer. Moreover, it was recognised, that working with the heated graphite atomizer in organic solutions shows great advantages compared with the flame, because any solvent may be used. The methods of continuous variation by Job and the molar ratio by Yoe and Jones for the determination of the complex stoichiometry were transferred to the system Cu-DDTC by working with the heated graphite atomizer.     

Infrared spectroscopic characterization of the buried interface and surfaces of bonded silicon wafers

Basic investigations have been carried out on the characterization of different processing steps in bond preparation using etched <111> faces of silicon wafers for the incidence of the infrared beam to a multiple internal reflection geometry. The method is very sensitive to the surface coverage and interface. Surface activation by RCA cleaning yields an increase of water coverage and a decrease of SiH and CH groups. The detection limit for an oxide layer between silicon wafers has been found to be about 3 nm. Received: 18 July 1997 / Revised: 15 August 1997 / Accepted: 19 August 1997     

Quantitative validation of different protein precipitation methods in proteome analysis of blood platelets

For the preparation of proteins for proteome analysis, precipitation is frequently used to concentrate proteins and to remove interfering compounds. Various methods for protein precipitation are applied, which rely on different chemical principles. This study compares the changes in the protein composition of human blood platelet extracts after precipitation with ethanol (EtOH) or trichloroacetic acid (TCA). Both methods yielded the same amount of proteins from the platelet preparations. However, the EtOH-precipitated samples had to be dialyzed because of the considerable salt content. To characterize single platelet proteins, samples were analyzed by two-dimensional fluorescence differential gel electrophoresis. More than 90% of all the spots were equally present in the EtOH- and TCA-precipitated samples. However, both precipitation methods showed a smaller correlation with nonprecipitated samples (EtOH 74.9%, TCA 79.2%). Several proteins were either reduced or relatively enriched in the precipitated samples. The proteins varied randomly in molecular weight and isoelectric point. This study shows that protein precipitation leads to specific changes in the protein composition of proteomics samples. This depends more on the specific structure of the protein than on the precipitating agent used in the experiment.     

Matrix-assisted laser desorption/ionization mass spectrometry with additives to 2,5-dihydroxybenzoic acid

Selected benzoic acid derivatives and related substances were used as additives to 2,5-dihydroxybenzoic acid (2,5DHB) and the performance of the mixtures in matrix-assisted laser desorption/ionization mass spectrometry was investigated. Using benzoic acid derivatives substituted at position 2 and/or 5 or related substances as a co-matrix in the 1–10% range with 2,5DHB results in improved ion yields and signal-to-noise ratio of analyte molecules, especially for the high-mass range. The enhanced performance is prominent for 2-hydroxy-5-methoxybenzoic acid and exists for both proteins and oligosaccharides. It is suggested that the improvement is caused by a disorder in the 2,5DHB crystal lattice allowing ‘softer’ desorption. Charge transfer from matrix ions to additive molecules at the expense of analyte ionization gives a simple explanation for the deteriorating effects of some tested additives.     

[Rb2(H2O)2][Re3(μ-Cl)3Br7(H2O)2]2 · H2O,ein gemischtes Halogenid-Hydrat mit anionischen Dimeren {[Re3(μ-Cl)3Br7(H2O)2]2 · H2O}2−

[Rb₂(H₂O)₂][Re₃(μ-Cl)₃Br₇(H₂O)₂]₂ · H₂O, a Mixed Halide-Hydrate with the Anionic Dimer {[Re₃(μ-Cl)₃Br₇(H₂O)₂]₂ · H₂O}^2? [Rb₂(H₂O)₂][Re₃(μ-Cl)₃Br₇(H₂O)₂]₂ · H₂O crystallizes as dark redbrown single crystals from an hydrobromic-acid solution of ReCl₃ and RbBr at 0°C. An important feature of the crystal structure (monoclinic, C2/c; a = 1494.61(8); b = 835.71(4); c = 3079.96(19) pm; β = 97.801(4)°; V_m = 573.9(4) cm³mol^?1; R = 0.060; R_w = 0.038) is the connection of two anions [Re₃(μ-Cl)₃Br₇(H₂O)₂]^? via a water molecule to dimers, {[Re₃(μ-Cl)₃Br₇(H₂O)₂]₂ · H₂O}^2?. These dimeric units are contained in slabs that are stacked in the [001] direction and held together by Rb⁺ cations and crystal water.