Synthesis of copper,nickel and cobalt complexes containing a new N2S2 ligand: benzyl-N,N′-alkylbis(2-amino-1-cyclopentencarbodithioate)

The synthesis of [benzyl-N,N-alkylbis(2-amino-1-cyclopentencarbodithioate)]M^II [alkyl = ethene (L₂) and propene, (L₃) and M = Cu, Ni and Co] complexes and their characterization (u.v.–vis., FT-IR, ¹H-n.m.r., mass spectra and cyclic voltametry) are reported.     

Detection of soil pollution by hydrocarbons using headspace-mass spectrometry and identification of compounds by headspace-fast gas chromatography-mass spectrometry

The direct coupling of a headspace sampler with a mass spectrometer is proposed as a screening tool for the rapid detection of soil pollution by hydrocarbons from petroleum and derivatives. The samples are subjected to the headspace generation process, with no prior treatment, and the volatiles generated are introduced directly into the mass spectrometer, thereby obtaining a fingerprint of the sample analysed. Suitable treatment of the signal by chemometric techniques allows unequivocal characterisation of the different types of sample. The use of fast gas chromatography with a mass spectrometer detector coupled to the headspace sampler allows identification of the major hydrocarbons present in the mineral and organic polluted samples, interpretation of the results obtained, and demonstrates the analytical potential of headspace-mass spectrometry coupling.     

Electro-oxidation of hispanolone and anti-inflammatory properties of the obtained derivatives

The electrochemical oxidation ((+)Pt-Ni(-)/NH(4)Br/MeOH) of the natural product hispanolone (1a) produced, in high yield (>95%), spiro-tetracyclic compounds 7a-7d as a result of the intramolecular addition of the C-9 hydroxyl group into the C-16 position with the simultaneous addition of a CH(3)O group at the C-15 position of the hispanolone furan moiety. After the electrochemical oxidation, an acid-catalyzed slow secondary reaction occurred producing the previously undescribed alpha-butenolide derivative, iso-Leopersin G (9). An anti-inflammatory study with the electro-synthesized compounds showed that 1a has higher anti-inflammatory properties with very low cytotoxicity (e.g., the inhibition of TPA-induced ear edema assay IC(50) = 1.05 microM/ear, positive control indomethacin IC(50) = 0.27 microM/ear).     

Methane Conversion Over Sr2+/La2O3 Catalyst Modified with Nickel and Copper

Methane transformation over Ni and Cu modified Sr²⁺/La₂O₃ catalysts has been studied. These species favor formation of reducible mixed oxides and change the surface reactivity of the Sr²⁺/La₂O₃ system, modifying the reaction mechanism, since Sr²⁺/La₂O₃ favors methane oxidative coupling but with copper methane combustion is favored and nickel favors partial oxidation.     

Design, synthesis, and evaluation of a mechanism-based inhibitor for gelatinase A

[structure: see text] Matrix metalloproteinases (MMPs), of which 26 are known, have been implicated in a number of pathological conditions, including tumor metastasis. We have previously described the first mechanism-based inhibitor for MMPs (J. Am. Chem. Soc. 2000, 122, 6799-6800), which in chemistry mediated by the active site zinc ion selectively and covalently inhibits MMP-2, -3, and -9. Computational analyses indicated that this selectivity in inhibition of MMPs could be improved by design of new variants of the inhibitor class. We report herein the syntheses of methyl 2-(4-{4-[(2-thiiranylpropyl)sulfonyl]phenoxy}phenyl)acetate (3) and 2-(4-{4-[(2-thiiranylpropyl)sulfonyl]phenoxy}phenyl)acetic acid (4), and show that compound 3 serves as a mechanism-based inhibitor exclusively for MMP-2. This molecule should prove useful in delineating the functions of MMP-2 in biological systems.     

Methodology for measuring the thermal conductivity of insulating samples with small dimensions by heat flow meter technique

Journal of Thermal Analysis and Calorimetry - Nowadays, developing advanced, highly insulating materials for minimizing heat losses in buildings is of utmost relevance. Thus, there is a constant...     

Simultaneous determination of gasoline oxygenates and benzene, toluene, ethylbenzene and xylene in water samples using headspace-programmed temperature vaporization-fast gas chromatography-mass spectrometry

A sensitive method is presented for the fast analysis of seven fuel oxygenates (methanol, ethanol, tert-butyl alcohol (TBA), methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), tert-amyl methyl ether (TAME) and diisopropyl ether (DIPE)) and benzene, toluene, ethylbenzene and p-xylene (BTEX) in water samples. The applicability of a headspace (HS) autosampler in combination with a GC device equipped with a programmable temperature vaporizer (PTV) and a MS detector is explored. The proposed method achieves a clear improvement in sensitivity with respect to conventional headspace methods due to the use of the PTV. Two different packed liners with materials of different trapping strengths (glass wool and Tenax-TA) were compared. The benefits of using Tenax-TA instead of glass wool as packed material for the measurement of the 11 compounds emerged as better signal-to-noise ratios and hence better detection limits. The proposed method is extremely sensitive. The limits of detection are of the order of ng/L for six of the compounds studied and of the order of microg/L for the rest, with the exception of the most polar and volatile compound: methanol. Precision (measured as the relative standard deviation for a level with an S/N ratio close to 3) was equal to or lower than 15% in all cases. The method was applied to the determination of the analytes in natural matrixes (tap, river and sea water) and the results obtained can be considered highly satisfactory. The methodology has much lower detection limits than the concentration limits proposed in drinking water by the US Environmental Protection Agency (EPA) and the European Union for compounds under regulation.     

Development and validation of an analytical methodology for the determination of p,p′-DDT, p,p′-DDE and p,p′-DDD in fish oil pills

An analytical methodology was proposed and validated to be applied to the determination of p,p′-DDT and its metabolites p,p′-DDE and p,p′-DDD in fish oil. The analytical procedure presented in this paper involves a single-step clean up process prior to the analysis. A solution of 1,2,3,4-tetrachloronaphtalene was used as internal standard.The analytical technique used was gas chromatography coupled to an electron capture detector. Details on the validation process are provided.The limits of detection ranged from 2.6 to 4.7 pg μL^− 1. The BCR 598 standard reference material (cod liver oil) was used to evaluate the performance of the methodology with satisfactory recoveries for all the compounds.The analytes were determined in three different fish oil pills sold in Spain as a supplementary vitamin support. The sum of p,p′-DDT and metabolites was from 13.2 to 51.3 ng g^− 1, the dominant compound being p,p′-DDE.     

Using Design of Experiments to Optimize a Screening Analytical Methodology Based on Solid-Phase Microextraction/Gas Chromatography for the Determination of Volatile Methylsiloxanes in Water

Volatile methylsiloxanes (VMSs) constitute a group of compounds used in a great variety of products, particularly personal care products. Due to their massive use, they are continually discharged into wastewater treatment plants and are increasingly being detected in wastewater and in the environment at low concentrations. The aim of this work was to develop and validate a fast and reliable methodology to screen seven VMSs in water samples, by headspace solid-phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The influence of several factors affecting the extraction efficiency was investigated using a design of experiments approach. The main factors were selected (fiber type, sample volume, ionic strength, extraction and desorption time, extraction and desorption temperature) and optimized, employing a central composite design. The optimal conditions were: 65 µm PDMS/Divinylbenzene fiber, 10 mL sample, 19.5% NaCl, 39 min extraction time, 10 min desorption time, and 33 °C and 240 °C as extraction and desorption temperature, respectively. The methodology was successfully validated, showing low detection limits (up to 24 ng/L), good precision (relative standard deviations below 15%), and accuracy ranging from 62% to 104% in wastewater, tap, and river water samples.