Über die Wahl der Lösungsmittelsysteme bei der papierchromatographischen Trennung organischer Verbindungen

Zusammenfassung An praktischen Beispielen wurde gezeigt, in welcher Weise die Trennung organischer Verbindungen mittels Papierchromatographie erzielt werden kann. Man ist nicht auf einige bewährte Lösungsmittel systeme allein angewiesen, sondern kann von Fall zu Fall systematisch neue und geeignete Systeme benützen. Es hat sich bewährt, sich nach den elementaren Löslichkeitsregeln für organische Stoffe zu richten, unter der Voraussetzung, daß die zu chromatographierende Verbindung in der stationären Phase gut, in der mobilen Phase dagegen weniger löslich ist. Durch Änderung der stationären Phase (Wasser, nicht wäßriges, polares Lösungsmittel, nicht polares Lösungsmittel) oder der Polarität und Zusammensetzung der mobilen Phase kann man das Wandern der Flecke am Chromatogramm beeinflussen, beliebige R_fWerte erhalten und in vielen Fällen auch eine beliebige Reihenfolge der Verbindungen am Chromatogramm erzielen.Da die Löslichkeit organischer Verbindungen von intermolekularen Kräften abhängig ist, erscheint das Problem im Zusammenhang mit strukturellen Einflüssen sehr kompliziert und muß für jeden Fall auf eigene Weise gelöst werden. Die Löslichkeitseigenschaften können weiter durch Benutzung reaktiver Lösungsmittel beeinflußt werden, die z. B. die Verbindungen in wasserlösliche Salze überführen können. Dabei ist an die möglichen Komplikationen, die bei ionisierbaren Verbindungen durch Dissoziation und Hydrolyse entstehen können, zu achten.Von den Hauptfaktoren, die eine Trennung ermöglichen können, seien die folgenden erwähnt: funktionelle Gruppen, ihre Anzahl, Polarität, gegenseitige Stellung, bzw. ihre Basizität oder Azidität, C-Atomanzahl in homologen Verbindungen, inter- und intramolekulare Wasserstoffbindungen, sterische Faktoren u. a. Es ist dann von der Art des gewählten Lösungsmittelsystems abhängig, welche der genannten Faktoren im Vordergrund stehen und welche beseitigt werden.Wenn die Löslichkeitsunterschiede der zu trennenden Stoffe zu gering sind, um gute Trennungen zu ermöglichen, ist es zweckmäßig, die Verbindungen in solche Derivate zu überführen, deren Strukturunterschiede größer sind.

---

Summary Practical examples are given to show how organic compounds can be separated by means of paper chromatography. The operator is not limited to tested solvent systems, but can use new suitable systems as the occasion demands. It has been found best to abide by the elementary rules of solubility of organic compounds, provided the compound to be chromatographed is quite soluble in the stationary phase but less soluble in the mobile phase. By altering the stationary phase (water, nonaqueous, polar solvent, non-polar solvent) or the polarity and composition of the mobile phase, the migration of the stains in the chromatogram can be influenced, selectedR _f -values can be obtained, and in many cases it is also possible to secure a desired succession of the compounds on the chromatogram.Since the solubility of organic compounds depends on intermolecular forces, the problem in connection with structural influences appears very complicated and must be solved individually for each case. Moreover, the solubility characteristics can be affected by using reactive solvents; for instance, the compounds can be converted into water soluble salts. Under such circumstances, sight must not be lost of the complications which may arise because of the dissociation and hydrolysis of ionizable compounds. The following are among the chief factors, which may make a separation possible: functional groups, their number, polarity, relative position, their basicity or acidity, C-atom number in homologous compounds, inter- and intramolecular hydrogen bonds, steric factors, etc. It then depends on the type of solvent system selected, which of these factors are predominant and which can be neglected or eliminated.If the solubility differences are too slight to permit good separations, the compounds to be separated should, if possible, be converted into derivatives whose structural differences are more pronounced.

---

Résumé Des exemples pratiques montrent comment il est possible d'effectuer la séparation de combinaisons organiques par Chromatographie sur papier. Il n'est pas uniquement fait appel à des systèmes de solvants éprouvés mais, dans certains cas, de nouveaux systèmes appropriés sont systématiquement utilisés.Il s'est avéré satisfaisant de faire appel aux règles élémentaires de solubilité des substances organiques sous réserve que la combinaison à chromatographier soit suffisamment soluble dans la phase stationnaire et moins soluble dans la phase mobile. En faisant varier la phase stationnaire (eau, solvant non aqueux, solvant polaire, solvant non polaire) ou la polarité et la composition de la phase mobile, il est possible d'influencer la migration des taches du chromatogramme, d'obtenir des valeurs deR _f désirées et, dans de nombreux cas, d'obtenir les combinaisons dans un ordre déterminé sur le chromatogramme.La solubilité des combinaisons organiques étant fonction des forces intermoléculaires il en résulte que le problème se complique considérablement dans la mesure où l'on considère les influences structurelles et que chaque cas particulier doit recevoir une solution qui lui est propre. Les propriétés de solubilité peuvent en outre être influencées par l'emploi de solvants réactifs qui peuvent transformer, par exemple les combinaisons en sels solubles dans l'eau. Il faut alors tenir compte des possibilités de complications qui peuvent apparaître par dissociation et hydrolyse des combinaisons ionisables.Parmi les principaux facteurs qui permettent une séparation, il convient de mentionner les suivants: les groupes fonctionnels, leur nombre, leur polarité, leur position relative, ou encore leur acidité ou leur basicité, le nombre d'atomes de carbone de combinaisons homologues, les liaisons hydrogène inter- et intramoléculaires, les facteurs stériques, etc. Suivant la nature du système solvant choisi pourront alors varier les facteurs dont l'effet est prépondérant et ceux dont l'effet est nul. Lorsque les différences de solubilité des substances à séparer sont trop faibles pour permettre des séparations satisfaisantes, il est commode de transformer les combinaisons en dérivés dont les différences de structure soient plus importantes.

     

Biradicals/zwitterions from thermolysis of enyne-isocyanates. Application to the synthesis of 2(1H)-pyridones, benzofuro[3,2-c]pyridin-1(2H)-ones, 2,5-dihydro-1H-pyrido[4,3-b]indol-1-ones, and related compounds

Thermolysis of benzannulated enyne-isocyanates 13 and enyne-isocyanates 36 and 37 promoted the cycloaromatization reactions to generate in situ O,4-didehydro-2-hydroxyquinolines and O,4-didehydro-2-hydroxypyridines, respectively, as reactive intermediates. These cycloaromatized intermediates could be captured either as biradicals and/or as zwitterions depending on the nature of the substituent at the alkynyl terminus. The intermediate derived from cycloaromatization of 13a bearing a phenyl substituent could be regarded as biradical 14, which then abstracts hydrogen atoms from gamma-terpinene leading to 2(1H)-quinolinone 15. Alternatively, the same intermediate could also be regarded as zwitterion 14', which then undergoes an initial hydride abstraction from gamma-terpinene followed by protonation to produce 15. The presence of a 2-phenylethyl substituent in 13b and 37a or a 2-methylphenyl substituent in 37b also allowed the resulting intermediates to be captured intramolecularly either as biradicals or as zwitterions, producing 2(1H)-quinolinone 19, 2(1H)-pyridone 39, and benzopyranopyridine 43, respectively. On the other hand, with a 2-methoxyphenyl, a 2-(dimethylamino)phenyl, or a 3-methoxypropyl substituent, the chemical behavior of the cycloaromatized adduct could be best accounted for in terms of a zwitterionic intermediate leading to benzofuro[3,2-c]quinolin-6(5H)-one (20), 5,11-dihydro-11-methyl-6H-indolo[3,2-c]quinolin-6-one (25), benzofuro[3,2-c]pyridin-1(2H)-one 44, 2,5-dihydro-2,5-dimethyl-1H-pyrido[4,3-b]indol-1-one 46, and related compounds. Interestingly, thermolysis of 37f bearing a 2-(methoxymethyl)phenyl substituent at the alkynyl terminus produced the unexpected benzopyranopyridine 56 as the major product in a process involving the cleavage of the bond between the methoxyl oxygen and the adjacent methylene carbon. The efficiency and selectivity of the cycloaromatization reaction could also be enhanced by the introduction of 1.1 to 10 equiv of dimethylphenylsilyl chloride to the reaction mixture to capture the resulting zwitterion.     

Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.     

Methyl cellulose-based edible films and coatings I. Effect of plasticizer content on water and 1-octen-3-ol sorption and transport

Edible films were prepared from methyl cellulose with various concentrations of poly(ethylene glycol) 400 (PEG400) used as a plasticizer. Water vapour and 1-octen-3-ol (an aroma compound) were selected as hydrophilic and hydrophobic volatile penetrants respectively. Their solubility and permeability through methyl cellulose-based edible films were studied using gas chromatography methods. Whatever penetrant was used, the flux increased with the PEG400 content. Transfer behaviour, i.e., the order of increased magnitude of the transfer rate, strongly depends on the nature of the volatile compound. However, water sorption only depends on the PEG400 content whereas the aroma compound sorption is affected by both the water and the PEG400 concentrations. Relationships between solubility and permeability can be partially explained by the plasticization phenomenon.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Specific determination of 20 primary aromatic amines in aqueous food simulants by liquid chromatography-electrospray ionization-tandem mass spectrometry

A multi-analyte method without any pre-treatment steps using reversed-phase liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) was developed and applied for the determination of 20 primary aromatic amines (PAA) associated with polyurethane (PUR) products or azo-colours. The method was validated in-house for water and 3% acetic acid food simulants using spiked migrates from plastic laminates. Detection limits ranged from 0.27 to 3 microg amine/L food simulants, and RSD values of within-laboratory reproducibility at the 2 microg PAA/L level ranged from 3.9 to 19%. PAA migration from plastic laminates and black nylon cooking utensils were determined with the method, and high levels of 4,4'-methylenedianiline and aniline were found in migrates from about half of the tested cooking utensils. The method fulfils present legislative demands in the EU for screening and verification of PAA migration from food contact materials.     

Electrodynamic investigations of conduction processes in humid microcrystalline cellulose tablets

The conduction mechanism in microcrystalline cellulose (MCC) tablets at varying relative humidity (RH) has been investigated by using the techniques of low frequency dielectric spectroscopy and transient current analysis at room temperature. The dependence on RH on the measured conductivity and charge carrier density indicates that a high-power-law-exponent percolation process of cations being conducted on water molecules occupying available 6-OH units on the cellulose chains is the dominating dc conduction mechanism at RH below 3 wt % of moisture content. The experimentally observed decrease in charge carrier mobility with increasing moisture content shows that protons and H3O+ ions that are being blocked at empty 6-OH sites also contribute to the charge transport process in cellulose at low moisture contents.     

BRCA1 mutation screening using restriction endonuclease fingerprinting-single-strand conformation polymorphism in an automated capillary electrophoresis system

Efficient mutation scanning techniques are needed for the rapid detection of novel disease-associated mutations and rare-sequence variants of putative importance. The large size of the breast cancer 1 gene (BRCA1) and the many mutations found throughout its entire coding sequence make screening for mutations in this gene particularly challenging. We have developed a method for screening exon 11 of the BRCA1 gene based on restriction enzyme digestion of fluorescence-labeled polymerase chain reaction (PCR) products followed by single-strand conformation polymorphism (SSCP) using an automated capillary electrophoresis system, denoted capillary restriction endonuclease fingerprinting (REF)-SSCP electrophoresis. Using this strategy on a control set of samples, we were able to detect 17 of 18 known sequence alterations. The method was then applied to screen 73 Norwegian females with family histories of breast and/or ovarian cancer. A total of 172 sequence alterations were detected, including substitutions, insertions, and deletions. One novel substitution of unknown function was identified. Sequencing of all samples negative in the capillary REF-SSCP system gave no additional mutations confirming the high sensitivity of the described methodology. Capillary REF-SSCP electrophoresis appeared as a technically convenient technique, requiring amplification of fewer PCR fragments than traditional SSCP. The novel strategy allows high-throughput mutation scanning without radioactive labeling and polyacrylamide gel electrophoresis (PAGE).     

Cascade cyclizations via N,4-didehydro-2-(phenylamino)pyridine biradicals/zwitterions generated from enyne-carbodiimides

Thermolysis of the enyne-carbodiimides 7 having the central carbon-carbon double bond incorporated as part of the cyclopentene ring favors the formation of the corresponding N,4-didehydro-2-(phenylamino)pyridine intermediates, either as the sigma,pi-biradicals 8 or as the zwitterions 8', for subsequent synthetic elaborations. By placing appropriate substituents at the acetylenic terminus, a variety of the intramolecular decay routes are available for the initially formed sigma,pi-biradicals/zwitterions, leading to the 5,6-dihydrobenzo[c][1,8]naphthyridine 21, the 1,2,3,4-tetrahydro[1,8]naphthyridine 24 and related compounds 25 and 26, the 5,6-dihydrobenz[f]isoquinoline 28, and the benzofuro[3,2-c]pyridine 30. Surprisingly, the use of the dimethylamino group of the 2-(dimethylamino)phenyl substituent to capture the carbocationic center in the zwitterion 8e' furnished the 5H-pyrido[4,3-b]indole 32 in only 14% yield. The majority of the products were the 1H-pyrrolo[2,3-b]quinolines 34 and 35, isolated in 48 and 7% yields, respectively. However, it was possible to redirect the reaction toward 32 by conducting thermolysis of the enyne-carbodiimide 7e in the presence of 5 equiv of dimethylphenylsilyl chloride. Under this reaction condition, the 2-pyridone imine 37 was isolated in 86% yield, which on exposure to silica gel was converted to 32 in essentially quantitative yield. Thermolysis of the enyne-carbodiimide 42 having a methoxymethyl substituent at the acetylenic terminus led to the formation of 46' as a pyridine analogue of ortho-quinone methide imine. An intramolecular hetero-Diels-Alder reaction of 46' then furnished the tetrahydro[1,8]naphthyridino[2,1-c][1,4]benzoxazine 47.