Experimental exploration of underexpanded supersonic jets

Two underexpanded free jets at fully expanded Mach numbers $M_\mathrm{j}$ = 1.15 and 1.50 are studied. Schlieren visualizations as well as measurements of static pressure, Pitot pressure and velocity are performed. All these experimental techniques are associated to obtain an accurate picture of the jet flow development. In particular, expansion, compression and neutral zones have been identified in each shock cell. Particle lag is considered by integrating the equation of motion for particles in a fluid flow and it is found that the laser Doppler velocimetry is suitable for investigating shock-containing jets. Even downstream of the normal shock arising in the $M_\mathrm{j}$ = 1.50 jet, the measured gradual velocity decrease is shown to be relevant.     

Lubrication-type analysis of thermo-hydraulic transport in a model grooved heat pipe

The objective of this work is to achieve a rigorous resolution of the coupled hydraulic and thermal problems (including the solid) within a single triangular axial groove of a heat pipe in microgravity conditions. This is done by modeling the phenomena of transport of matter, momentum and heat, starting from the equations of continuity, Navier-Stokes and energy conservation. By combining the lubrication approximation and the one-sided approach, our approach leads to a 2nd-order differential equation for the scaled height of liquid. Through solving numerically this equation for a given heat flux input distribution, we can establish the profiles along the heat pipe for the scaled height of liquid and for the scaled averaged axial velocity of the flow. The equation of energy conservation can then also be solved, for the scaled liquid height distribution just determined. It leads to the scaled temperature field in each section of the heat pipe, and hence to the 3D temperature field, both in the solid and in the liquid. The proposed approach also enables determining the maximum heat flux that can be applied in the evaporator section without reaching dryout. Finally, the parametric sensitivity of this maximum heat flux to both geometrical and thermodynamical parameters is also analyzed.     

Advances in organic transistor-based biosensors: from organic electrochemical transistors to electrolyte-gated organic field-effect transistors

Organic electronics have, over the past two decades, developed into an exciting area of research and technology to replace classic inorganic semiconductors. Organic photovoltaics, light-emitting diodes, and thin-film transistors are already well developed and are currently being commercialized for a variety of applications. More recently, organic transistors have found new applications in the field of biosensors. The progress made in this direction is the topic of this review. Various configurations are presented, with their detection principle, and illustrated by examples from the literature.     

Can Aromaticity Coexist with Diradical Character? An Ab Initio Valence Bond Study of S2N2 and Related 6π‐Electron Four‐Membered Rings E2N2 and E42+ (E=S,Se, Te)

A series of 6π‐electron 4‐center species, E₂N₂ and E₄²⁺ (E=S, Se, Te) is studied by means of ab initio valence bond methods with the aims of settling some controversies on 1) the diradical character of these molecules and 2) the radical sites, E or N, of the preferred diradical structure. It was found that for all molecules, the cumulated weights of the two possible diradical structures are always important and close to 50 %, making these molecules comparable to ozone in terms of diradical character. While the two diradical structures are degenerate in the E₄²⁺ dications, they have on the contrary strongly unequal weights in the E₂N₂ neutral molecules. In these three molecules, the electronic structure is dominated by one diradical structure, in which the radical sites are the two nitrogen atoms, while the other diradical structure is much less important. The ordering of the various VB structures in terms of their calculated weights is confirmed by the relative energies of individual VB structures. In all cases, the major diradical structure (or both diradical structures when they are degenerate) is (are) the lowest one(s), while the covalent VB structures lie higher in energy. The vertical resonance energies are considerable in S₂N₂ and S₄²⁺, about 80 % of the estimated value for benzene, and diminish as one goes down the periodic table (S→Se→Te). This confirms the aromatic character of these species, as already demonstrated for S₂N₂ on the basis of magnetic criteria. This and the high weights and stabilities of one or both diradical structures in all systems indicates that aromaticity and diradical character do not exclude each other, contrary to what is usually claimed. Furthermore, it is shown that the diradical structures find their place in a collective electron flow responsible for the ring currents in the π system of these species.     

Cyto-mechanoresponsive polyelectrolyte multilayer films

Cell adhesion processes take place through mechanotransduction mechanisms where stretching of proteins results in biological responses. In this work, we present the first cyto-mechanoresponsive surface that mimics such behavior by becoming cell-adhesive through exhibition of arginine-glycine-aspartic acid (RGD) adhesion peptides under stretching. This mechanoresponsive surface is based on polyelectrolyte multilayer films built on a silicone sheet and where RGD-grafted polyelectrolytes are embedded under antifouling phosphorylcholine-grafted polyelectrolytes. The stretching of this film induces an increase in fibroblast cell viability and adhesion.     

Peripherally fused porphyrins via the Scholl reaction: synthesis, self-assembly, and mesomorphism

Oxidative coupling of activated aryl groups attached to β-positions of the porphyrin ring provides convenient access to derivatives containing peripherally fused phenanthrene and benzo[g]chrysene units. Tetra(benzochryseno)porphyrin, reported here for the first time, contains a nonplanar, sterically locked π system and shows very intense electronic absorptions in the Q range of the electronic spectrum. Tetraphenanthroporphyrins show a tendency to aggregate in solution. In one case, a discrete dimer is formed, whose structure was investigated spectroscopically and theoretically. Derivatives bearing long alkyl chains are mesomorphic and exhibit columnar phases (tetraphenanthroporphyrins) and a monoclinic 3D phase (tetrabenzochrysenoporphyrin). The symmetry of column packing in the columnar phases is dependent on the number of alkyl chains per molecule. X-ray diffraction measurements show that, in spite of their nonplanarity, the aromatic cores in the mesophases are tightly stacked within the column. The corresponding stacking patterns were derived from the structure of the dimer, on the basis of geometrical analysis and molecular modeling.     

Unraveling the mechanism of catalytic reduction of O2 by microperoxidase-11 adsorbed within a transparent 3D-nanoporous ITO film

Nanoporous films of indium tin oxide (ITO), with thicknesses ranging from 250 nm to 2 μm, were prepared by Glancing Angle Deposition (GLAD) and used as highly sensitive transparent 3D-electrodes for quantitatively interrogating, by time-resolved spectroelectrochemistry, the reactivity of microperoxidase-11 (MP-11) adsorbed within such films. The capacitive current densities of these 3D-electrodes as well as the amount of adsorbed MP-11 were shown to be linearly correlated to the GLAD ITO film thickness, indicating a homogeneous distribution of MP-11 across the film as well as homogeneous film porosity. Under saturating adsorption conditions, MP-11 film concentration as high as 60 mM was reached. This is equivalent to a stack of 110 monolayers of MP-11 per micrometer film thickness. This high MP-11 film loading combined with the excellent ITO film conductivity has allowed the simultaneous characterization of the heterogeneous one-electron transfer dynamics of the MP-11 Fe(III)/Fe(II) redox couple by cyclic voltammetry and cyclic voltabsorptometry, up to a scan rate of few volts per second with a satisfactory single-scan signal-to-noise ratio. The potency of the method to unravel complex redox coupled chemical reactions was also demonstrated with the catalytic reduction of oxygen by MP-11. In the presence of O(2), cross-correlation of electrochemical and spectroscopic data has allowed us to determine the key kinetics and thermodynamics parameters of the redox catalysis that otherwise could not be easily extracted using conventional protein film voltammetry. On the basis of numerical simulations of cyclic voltammograms and voltabsorptograms and within the framework of different plausible catalytic reaction schemes including appropriate approximations, it was shown possible to discriminate between different possible catalytic pathways and to identify the relevant catalytic cycle. In addition, from the best fits of simulations to the experimental voltammograms and voltabsorptograms, the partition coefficient of O(2) for the ITO film as well as the values of two kinetic rate constants could be extracted. It was finally concluded that the catalytic reduction of O(2) by MP-11 adsorbed within nanoporous ITO films occurs via a 2-electron mechanism with the formation of an intermediate Fe(III)-OOH adduct characterized by a decay rate of 11 s(-1). The spectroelectroanalytical strategy presented here opens new opportunities for characterizing complex redox-coupled chemical reactions not only with redox proteins, but also with redox biomimetic systems and catalysts. It might also be of great interest for the development and optimization of new spectroelectrochemical sensors and biosensors, or eventually new photoelectrocatalytic systems or biofuel cells.     

Towards modelling the vibrational signatures of functionalized surfaces: carboxylic acids on H-Si(111) surfaces

In this work, we investigate the adsorption process of two carboxylic acids (stearic and undecylenic) on a H-Si(111) surface via the calculation of structural and energy changes as well as the simulation of their IR and Raman spectra. The two molecules adsorb differently at the surface since the stearic acid simply physisorbs while the undecylenic acid undergoes a chemical reaction with the hydrogen atoms of the surface. This difference is observed in the change of geometry during the adsorption. Indeed, the chemisorption of the undecylenic acid has a bigger impact on the structure than the physisorption of the stearic acid. Consistently, the former is also characterized by a larger value of adsorption energy and a smaller value of the tilting angle with respect to the normal plane. For both the IR and Raman signatures, the spectra of both molecules adsorbed at the surface are in a first approximation the superposition of the spectra of the Si cluster and of the carboxylic acid considered individually. The main deviation from this simple observation is the peak of the stretching Si-H (ν(Si-H)) mode, which is split into two peaks upon adsorption. As expected, the splitting is bigger for the chemisorption than the physisorption. The modes corresponding to atomic displacements close to the adsorption site display a frequency upshift by a dozen wavenumbers. One can also see the disappearance of the peaks associated with the C=C double bond when the undecylenic acid chemisorbs at the surface. The Raman and IR spectra are complementary and one can observe here that the most active Raman modes are generally IR inactive. Two exceptions to this are the two ν(Si-H) modes which are active in both spectroscopies. Finally, we compare our simulated spectra with some experimental measurements and we find an overall good agreement.     

Plate coating: influence of concentrated surfactants on the film thickness

We present a large range of experimental data concerning the influence of surfactants on the well-known Landau-Levich-Derjaguin experiment where a liquid film is generated by pulling a plate out of a bath. The thickness h of the film was measured as a function of the pulling velocity V for different kinds of surfactants (C(12)E(6), which is a nonionic surfactant, and DeTAB and DTAB, which are ionic) and at various concentrations near and above the critical micellar concentration (cmc). We report the thickening factor α = h/h(LLD), where h(LLD) is the film thickness obtained without a surfactant effect, i.e., as for a pure fluid but with the same viscosity and surface tension as the surfactant solution, over a wide range of capillary numbers (Ca = ηV/γ, with η being the surfactant solution viscosity and γ its surface tension) and identify three regimes: (i) at small Ca α is large due to confinement and surface elasticity (or Marangoni) effects, (ii) for increasing Ca there is an intermediate regime where α decreases as Ca increases, and (iii) at larger (but still small) Ca α is slightly higher than unity due to surface viscosity effects. In the case of nonionic surfactants, the second regime begins at a fixed Ca, independent of the surfactant concentration, while for ionic surfactants the transition depends on the concentration, which we suggest is probably due to the existence of an electrostatic barrier to surface adsorption. Control of the physical chemistry at the interface allowed us to elucidate the nature of the three regimes in terms of surface rheological properties.     

Energetic and spectral properties of triple photon downconversion in a phase-matched KTiOPO4 crystal

We measured the spectrum and energy of infrared triple photons generated in a phase-matched KTiOPO4 crystal pumped by picosecond beams at 532 and 1662 nm. The experimental data are in good agreement with our model, taking into account the spectral linewidths of the incident beams as well as a parasitic Kerr effect.