Extraction of aromatic organic compounds by polyurethane foam

The mechanism of extraction of organic compounds by open-cell polyurethane foam has been investigated through a detailed study with simple aromatic compounds. Comparison with identical extractions into diethyl ether suggests that the basic extraction mechanism is an ether-like solvent extraction process. The addition of salt increases the extraction and changing the dielectric constant of the aqueous solution also affects the extraction. For organic compounds which have a group capable of hydrogen bonding, some additional factor appears to influence the extraction. This appears to be hydrogen bonding with the polyurethane foam; it is stronger with polyether foam and reduced by the presence of a strong intramolecular hydrogen-bonding group placed ortho to the hydrogen-bonding group. Thermodynamic studies support these conclusions.     

Extraction of zirconium and hafnium thiocyanate with polyurethane foam

Conditions for the extraction of zirconium and hafnium thiocyanate by polyether-type polyurethane foam were studied in detail. The composition of the extractable species was found to be dependent on both the thiocyanate and metal-ion concentrations. The extraction efficiency for zirconium and hafnium depended on the size of the counter-cation as well as on the type of anion.     

Formation and emission of tetraalkylammonium salt molecular ions sputtered from a gelatin matrix

A gelatin matrix was simultaneously doped with nine equimolar, homologous, tetraalkylammonium salts ranging in mass from 210 to 700 Da. Bombardment of the sample with kiloelectronvolt ions resulted in a nonidentical distribution of relative cation intensities with a maximum at m/z 242 for samples with a total salt concentration of 0.004 g of salt/g of gelatin. A rapid increase in relative intensities with increasing mass is observed for the low mass salts and is believed to be linked to changes in the ionization efficiencies. The changes in ionization efficiencies are likely related to decreasing coulombic attractive forces between the organic cation and the counterion. Disappearance cross-sections, determined from decay curves, indicate that sputter-induced damage increases with increasing mass of the cation. Fragment-to-intact cation ratios also suggest that damage accumulates fastest in the heaviest salts. These observations indicate that desorption yields of the organic salts in a gelatin matrix decrease with increasing mass. In addition, suppression of lower mass tetraalkylammonium salt intact cation intensities was observed for salt-in-gelatin concentrations greater than 10⁻³ g/g.     

聚甲基丙烯酸甲酯热氧化降解的化学动力学研究

使用质谱、热分析手段研究了PMMA热解反应 .结果表明 ,在氮气中 ,PMMA -CH =CH2 有两个失重阶段 ,分别对应于主链末端双键引发的断链和主链无规则断链反应 ,转折点的失重率约为 2 6 % .其中 ,第一阶段的失重速率受扩散过程控制 ,平均表观活化能E为 15 8.5kJ/mol,lnA为 2 7.6 9;第二失重阶段为 1.5级化学反应 ,平均表观活化能E为 2 14 .79kJ/mol,lnA为 4 0 .4 6 .在空气中 ,PMMA也有两个失重阶段 ,反应机理为 1级化学反应 ,转折点处的失重率约为 70 % .其中在第一失重阶段平均表观活化能E为 130 .32kJ/mol,lnA为 2 4 .81,在此阶段中 ,过氧化基团的分解反应对PMMA的失重速率有重要影响 ;在空气中第二失重阶段平均表观活化能E为 78.2 5kJ/mol,lnA为 13.97.     

High-frequency acoustic emissions generated by a 20 kHz sonochemical horn processor detected using a novel broadband acoustic sensor: a preliminary study

This paper describes the application of a novel broadband acoustic sensor to evaluating the acoustic emissions from cavitation produced by a typical commercial 20 kHz sonochemical horn processor. Investigations of the reproducibility of the processor, and of the variation in cavitation emissions as a function of output setting and sensor location are described, and resulting trends discussed in terms of the broadband integrated power in the megahertz frequency range. Companion studies with a conventional membrane hydrophone have illustrated for the first time that cavitation emissions produced by a sonochemical horn processor can extend to frequencies beyond 20 MHz, and the sensor shows that significant nonlinearity can be seen in measured cavitation activity with increasing nominal output power.     

A notable conversion of a thiolacetate to its corresponding sulfonyl chloride

A direct conversion of a thiolacetate to its corresponding sulfonyl chloride in the presence of acid and base sensitive functional groups is described.     

Assessment of laser-induced thermal load on silicon nanostructures based on ion desorption yields

Experimental assessment of the thermal load induced by fast laser pulses on micro- and nanostructures through IR imaging is currently too slow and lacks the spatial resolution to be useful. In this paper, we introduce a method based on measuring the laser-induced yields of ions to compare the thermal loads on nanofabricated silicon structures, when exposed to nanosecond laser pulses. The laser fluences at which the ion yields of, for example, sodiated and potassiated peptides ions are equal for two different structures correspond to equivalent thermal loads. Using alkalinated peptides is a convenient choice because the corresponding ion intensities are easily measured up to the melting point of silicon. As an example, we compare the nanosecond laser heating of silicon nanopost arrays with diverse post diameters and periodicities. Assessment of the thermal load through ion yield measurements can also be used to verify model assumptions for heat transport regimes in nanostructures.     

Hilbert transforms and maximal functions along variable flat curves

We study certain Hilbert transforms and maximal functions along variable flat curves in the plane. We obtain their boundedness by considering the oscillatory singular integrals which arise from an application of a partial Fourier transform.