Characteristics of immunosorbents used as a new approach to selective solid-phase extraction in environmental analysis

Summary The trace-level determination of organic pollutants in complex matrices is difficult and often not reliable because theccurrent extraction procedures are non-selective. New extraction sorbents involving antigen-antibody interactions, called immunosorbents (ISs), have been synthesised in order to trap a group of structurally related pollutants. The IS capacity is always high for the analyte-antigen used to make the antibodies, but can be low for some related compounds. In this work, we show the relationship that exists between capacity, break-through volume and recovery of analytes because of the competition between the structurally related compounds for antibody sites. Breakthrough due to the overloading of the column should be avoided because calibration curves are no longer linear. The capacity of two ISs, one made for trapping the triazine pesticide group and the second for the phenylurea, group, have been optimised by selecting silica with 50 nm pore size. Calibration curves are linear for all the compounds in a mixture of ten phenylureas up to a concentration of 5 to 10 μg L⁻¹ for each compound when handling 50 mL water samples through a precolumn packed with 0.22 g of IS. Under these conditions, reliable quantitative results are obtained because calibration curves are similar when compounds are alone or in a mixture. Application to the clean-up of soil extracts illustrates the high selectivity and the high potential of these new sorbents in environmental analysis. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Complex forming and extraction properties of oligo benzo-fused crown ethers

The complex forming properties with alkali metal and ammonium ions of a series of oligo benzo-condensed 18-crown-6 ethers1–8 having a different gradation of lipophilicity and of molecular rigidity are investigated by voltammetry at the interface of two immiscible electrolyte solutions (ITIES) and by a liquid-liquid extraction technique. The experimental results obtained in the two phase system H₂O/nitrobenzene are discussed in relation to the structure of the crown and the cation type. The stability constants for the 1 : 1 complexes of Na⁺, K⁺, Rb⁺, Cs⁺ and NH ₄ ⁺ in nitrobenzene have been determined and compared with the extraction constants for the 1: 1 complexes of Na⁺ and K⁺ and for the 1 : 1 and 1 : 2 complexes of Cs⁺, showing the effect of oligo benzo condensation for the 18-crown-6 system.     

Quantitative effect of nonionic surfactant partitioning on the hydrophile-lipophile balance temperature

Phase behaviors of water/nonionic surfactants/isooctane systems are determined experimentally in temperature-global surfactant concentration diagrams. The surfactants are monodistributed polyoxyethylene glycol n-dodecyl ether. They are used as model mixtures of two, three, or five compounds or as constituents of a commercial surfactant. It is found that the phase diagrams of these systems are bent gradually toward the highest temperatures as the global surfactant concentration decreases. Each phase diagram is well-characterized by the curve of the HLB (hydrophile-lipophile balance) temperature versus the global surfactant concentration. For any fixed global surfactant concentration, this temperature is the middle temperature of the three-phase region; it can be calculated from an additive rule of the HLB temperatures of the surfactants weighted by their mole fractions at the water/oil interface. These mole fractions are determined through the pseudophase model using surfactant partitioning. Calculations require the knowledge of the critical micelle concentration, the partition coefficient between water and oil, and the HLB temperature of each surfactant of the mixture. This treatment can be used to correctly predict the variation of the HLB temperatures of the surfactant mixtures studied versus the global surfactant concentration. Furthermore, these calculations show that the observed curvature of the phase diagrams at the lowest global concentrations is due to the most favorable partitioning toward the oil of the lowest ethoxylated surfactant molecules.     

First anhydrous gold perchlorato complex: ClO(2)Au(ClO(4))(4). Synthesis and molecular and crystal structure analysis

Chlorine trioxide, Cl(2)O(6), reacts with Au metal, AuCl(3), or HAuCl(4).nH(2)O to yield the well-defined chloryl salt, ClO(2)Au(ClO(4))(4). The crystal and molecular structure of ClO(2)Au(ClO(4))(4) was solved by a Rietveld analysis of powder X-ray diffraction data. The salt crystallizes in a monoclinic cell, space group C2/c, with cell parameters a = 15.074(5), b = 5.2944(2), and c = 22.2020(2) A and beta = 128.325(2) degrees. The structure displays discrete ClO(2)(+) ions lying in channels formed by Au(ClO(4))(4)(-) stacks. Au is located in a distorted square planar environment: Au-O = 1.87 and 2.06 A. [ClO(4)] groups are monodentate with ClO(b) = 1.53 and ClO(t) = 1.39 A (mean distances; O(b), oxygen bonded to Au; O(t), free terminal oxygen). A full vibrational study of the Au(ClO(4))(4)(-) anion is supported by DFT calculations.     

Tracking the optical mass centroid of single electroactive nanoparticles reveals the electrochemically inactive zone

The inevitable microstructural defects, including cracks, grain boundaries and cavities, make a portion of the material inaccessible to electrons and ions, becoming the incentives for electrochemically inactive zones in single entity. Herein, we introduced dark field microscopy to study the variation of scattering spectrum and optical mass centroid (OMC) of single Prussian blue nanoparticles during electrochemical reaction. The “dark zone” embedded in a single electroactive nanoparticle resulted in the incomplete reaction, and consequently led to the misalignment of OMC for different electrochemical intermediate states. We further revealed the dark zones such as lattice defects in the same entity, which were externally manifested as the fixed pathway for OMC for the migration of potassium ions. This method opens up enormous potentiality to optically access the heterogeneous intraparticle dark zones, with implications for evaluating the crystallinity and electrochemical recyclability of single electroactive nano-objects.

The schematic of single cubic-shaped Prussian blue (PB) mesocrystals formed by the oriented aggregation of small nanocrystals. The dark-field images of single PB nanoparticle at PB and Prussian white (PW) states, respectively.     

Structure of the liquid-vapor interface of water-methanol mixtures as seen from Monte Carlo simulations

Monte Carlo simulation of the vapor-liquid interface of water-methanol mixtures of different compositions, ranging from pure water to pure methanol, have been performed on the canonical (N, V, T) ensemble at 298 K. The analysis of the systems simulated has revealed that the interface is characterized by a double layer structure: methanol is strongly adsorbed at the vapor side of the interface, whereas this adsorption layer is followed at its liquid side by a depletion layer of methanol of lower concentration than in the bulk liquid phase of the system. The dominant feature of the interface has been found to be the adsorption layer in systems of methanol mole fractions below 0.2, and the depletion layer in systems of methanol mole fractions between 0.25 and 0.5. The orientation of the molecules located at the depletion layer is found to be already uncorrelated with the interface, whereas the methanol molecules of the adsorption layer prefer to align perpendicular to the interface, pointing straight toward the vapor phase by their methyl group. Although both the preference of the molecular plane for a perpendicular alignment with the interface and the preference of the methyl group for pointing straight to the vapor phase are found to be rather weak, the preference of the methyl group for pointing as straight toward the vapor phase as possible within the constraint imposed by the orientation of the molecular plane is found to be fairly strong. One of the two preferred orientations of the interfacial water molecules present in the neat system is found to disappear in the presence of methanol, because methanol molecules aligned in their preferred orientation can replace these water molecules in the hydrogen-bonding pattern of the interface.     

4,4′‐Bipyridyl N,N′‐dioxide–3‐hydroxy‐2‐naphthoic acid (1/2)

4,4′‐Bipyridyl N,N′‐dioxide crystallizes with 3‐hydr­oxy‐2‐naphthoic acid to give a centrosymmetric three‐component adduct, C₁₀H₈N₂O₂·2C₁₁H₈O₃, which is engineered into a two‐dimensional layer structure by two kinds of π–π inter­actions. Weak C—H⋯O inter­actions further link the two‐dimensional structure into a three‐dimensional structure.     

Etude de phosphates condenses diagramme d’equilibre du systeme AgPO3−Pr(PO3)3 Données sur AgPr(PO3)4

The AgPO₃?Pr(PO₃)₃ system has been studied for the first time by differential thermal analysis, X-ray diffraction and IR spectroscopy. The system shows one compound AgPr(PO₃)₄ which melts in a peritectic decomposition at 1069 K. An eutectic appears at 761 K. AgPr(PO₃)₄ belongs to the monoclinic system with space group P2_t/c,Z=4. The parameters of the unit cell are:a=12.000(9),b=13.177(4),c=7.046(5) Å and β=123^o,81(6),Z=4. Its IR absorption spectrum is typical of chain phosphates.     

Underpotential deposition of hydrogen on benzene-modified Pt(111) in aqueous H2SO4

The Pt(111) electrode is modified by an overlayer of C6H6 (ads) upon its cycling in the 0.05-0.80 V range in aq H2SO4 + 1 mM C6H6. The C6H6 (ads) overlayer significantly changes the underpotential-deposited H (H(UPD)) and anion adsorption, and cyclic-voltammetry (CV) profiles show a sharp cathodic peak and an asymmetric anodic one in the 0.05-0.80 V potential range. The C6H6 (ads) layer blocks the (bi)sulfate adsorption but facilitates the adsorption of one monolayer of H(UPD). Cycling of the benzene-modified Pt(111) in benzene-free aq 0.05 H2SO4 from 0.05 to 0.80 V results in a partial desorption of C6H6 (ads) and in a partial recovery of the CV profile characteristic of an unmodified Pt(111). The peak potential of the cathodic and anodic feature is independent of the scan rate, s (10 < or = s < or = 100 mV s(-1)), and the peak current density increases linearly with an increase of the scan rate. Temperature variation modifies the peak potential and current density but does not affect the charge density of the cathodic or anodic feature. Temperature-dependent studies allow us to determine the thermodynamic state function for the H(UPD) adsorption and desorption. Delta G degrees(ads)(H(UPD))assumes values from -4 to -12 kJ mol(-1), while has values from 9 to 14 kJ mol(-1). The values of delta Delta G degrees (delta Delta G degrees = delat Delta G degrees(ads) + delta Delta D degrees(des)) decrease almost linearly from 6 kJ mol(-1) at theta(H(UPD) --> 0 to 0 kJ mol(-1) at theta(H(UPD) --> 1. The nonzero values of delta Delta G degrees testify that the adsorbing and desorbing H(UPD) adatoms interact with an energetically different substrate. The lateral interactions changed from repulsive (omega = 29 kJ mol(-1) at theta(H(UPD) --> 0) to attractive (omega = -28 kJ mol(-1) at theta(H(UPD) --> 1) as the H(UPD) coverage increases. The values of delta S degrees(ads)(H(UPD)) increase from 19 to 56 J K(-1) mol(-1), while those of delta S degrees(des)(H(UPD)) decrease from 45 to -30 J K(-1) mol(-1) with an increase of H(UPD) coverage. The values of delta H degrees(des)(H(UPD)) and delta H degrees(des)(H(UPD)) vary from 0 to 27 kJ mol(-1). The Pt(111)-H(UPD) surface bond energy at the benzene-modified Pt(111) electrode falls in the 191-218 kJ mol(-1) range and is weaker than in the case of the unmodified Pt(111) electrode in the same electrolyte.     

Selective LC Determination of Cabergoline in the Bulk Drug and in Tablets: In Vitro Dissolution Studies

Cabergoline (CAB) is an ergot alkaloid derivative with dopamine agonist activity. A novel, simple, and rapid stability-indicating high-performance liquid chromatographic (HPLC) method for assay of CAB in tablets has been developed and validated. Chromatography was performed on a 4.6 mm i.d. × 250 mm, 5 μm particle, cyano column with acetonitrile–10 mM phosphoric acid, 35:65 (v/v), containing 0.04% triethylamine, as mobile phase, at a flow rate of 1.0 mL min^?1, and UV detection at 280 nm. Response was a linear function of concentration in the range 0.1–4 μg mL^?1 (r ² = 0.9999). The recovery of the method was good (99.45%) and RSD values for intra-day and inter-day precision were 0.24–0.88% and 0.66–1.19%, respectively. The method can be used for quality-control assay of CAB in tablets, for stability studies, and for in vitro dissolution studies.