Three-stage auto-ignition of n-heptane and methyl-cyclohexane mixtures at lean conditions in a flat piston rapid compression machine

One approach to enhancing the thermal efficiency of combustion systems is to burn fuels at ultra-lean conditions (equivalence ratio below 0.5). It has been recently reported that the auto-ignition of some hydrocarbon fuels, under specific temperature, pressure, and mixture conditions, releases heat in three distinctive stages. The three auto-ignition stages can be divided as a first low-temperature auto-ignition stage with conventional low temperature, and a high-temperature stage separated into two sub-stages. This study presents ignition delay time measurements of n-heptane and methyl-cyclohexane (MCH) mixtures in a flat piston rapid compression machine (RCM) under ultra-lean conditions. It provides experimental evidence of three-stage auto-ignition. This phenomenon of delayed high-temperature heat release is seldom reported in the literature and this is the first time to be reported for these types of fuels. The experiments cover two binary n-heptane/MCH mixtures of 15/85 and 70/30 by volume, pressures of 11 bar and 16 bar, temperature range of 700 to 900 K, and equivalence ratio of 0.4. The RCM optical access was utilized for high-speed chemiluminescence imaging. Detailed chemical kinetic simulations in a homogenous batch reactor with variable volume were conducted to further interrogate the three-stage auto-ignition phenomenon. Chemiluminescence shows that three-stage auto-ignition occurs in the adiabatically compressed end-gas, which indicates that this phenomenon is chemically-driven and is not induced by a thermal stratification in the RCM experiments. The model predicts the features of three-stage auto-ignition, which were experimentally observed at temperatures approximately below 750 K. As expected, significant discrepancies are observed in the ignition delays of experiment and simulation in the negative temperature coefficient (NTC) region. The simulation of the n-heptane/MCH 70/30 mixture shows better agreement with experiments in the Positive Temperature Coefficient (PTC) region compared to the 15/85 mixture.     

Numerical and experimental studies of molten pool formation during an interaction of a pulse laser (Nd:YAG) with a magnesium alloy

A pulse laser (Nd:YAG) interaction with an AZ91 magnesium alloy has been experimentally and numerically studied. A two-dimensional (2D) axisymmetric model of a molten pool created by a laser heat source has been developed. The elaborated model solves the coupled equations of a laminar fluid flow and heat transfer to demonstrate the flow behavior in the pool. This model takes into account the coupled effects of buoyancy and Marangoni forces, the thermophysic variation properties with temperature, and the radiation and convection heat losses. Concerning numerical results, the molten temperature distribution, velocity field and molten shape were discussed. It was noted that the Marangoni flow significantly alters the characteristics of the thawing and solidifying processes, and makes the molten pool wider and shallower. On the other hand, the experimental results showed that the material thermal properties have significant effects on the transport phenomena which takes place in the molten pool, and consequently on the formation as well as the shape of the pool. Finally, a comparison between the numerical and experimental results exhibited a good agreement.     

Initial oxidation of polycrystalline Permalloy surface

X-ray photoelectron spectroscopy (XPS) and work-function measurements were used in combination to investigate the initial steps of Permalloy (Ni₈₀Fe₂₀) oxidation at room temperature. They showed that, after oxygen saturation, the surface is covered by nickel oxide (NiO), nickel hydroxide (Ni(OH)₂) and iron oxides (Fe_xO_y), and there is no preferential oxidation. Iron oxidation proceeds through the formation of FeO (Fe²⁺) followed with Fe₂O₃ growth (Fe³⁺). The oxidation is governed by a dissociative Langmuir-type oxidation: the sticking coefficient is decreasing over oxygen exposure. Oxidation continues by oxygen dissolution into the first layers to form a nano-oxide of about 8 Å in thickness.     

Statistical analyses of electromyographic activity in spasmodic dysphonic and normal control subjects

Heterogeneity in the quality and task sensitivity of vocal symptoms in the spasmodic dysphonia (SD) population contributes to controversy as to whether this is a single disorder or two disorders with different etiologies (neurogenic versus psychogenic). Perceptual and acoustic assessments of vocal symptoms are inadequate to resolve this controversy. However, myoelectric events are intimately proximal to the source of vocal disruption and may be informative. The present report employs statistical modeling of quantitative amplitude measures of electromyographic activity recorded from thyroarytenoid to examine neuromotor bases of vocal symptoms in SD. Consideration of perceptual ratings of the quality and task sensitivity of vocal symptoms in the context of statistical models provides support for the conclusion that the range of vocal symptoms identified as SD represents a single, neurogenic disorder.     

快速傅里叶变换与线性调频Z变换联合算法在光纤法布里-珀罗传感器解调中的应用

将快速傅里叶变换(FFT)与线性调频Z变换(CZT)联合变换的方法应用到法布里-珀罗(F-P)腔传感器的解调中,从理论上分析了该方法的解调原理及误差.模拟计算得出,该联合算法解调出的腔长的相对误差达到0.01%,腔长的最大绝对误差小于0.05 μm.在对测量范围为O～3 MPa的F-P腔微机电系统(MEMS)压力传感器进行的解调试验中,该算法可以辨别0.01 MPa的压力,腔长与压力数据的拟合度为0.99316,测量压力与实际压力的标准偏差小于0.005 MPa.实验结果表明,FFT与CZT联合解调的方法可以在较少计算量的基础上达到较高的精度,满足实际需求.     

Laser surface alloying of an electroless Ni–P coating with Al-356 substrate

Laser surface alloying of an electroless plating Ni–P coatings on an Al-356 aluminium alloy was carried out using a 1-kW pulsed Nd:YAG laser. The microstructure, chemical composition and phase identification of the alloyed layer were determined using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffractometry (XRD), respectively. It was shown that laser surface treatment produced a relatively smooth, crack-free and hard surface layer. The hardness of the surface significantly increased due to the formation of the uniformly distributed fine Ni–Al intermetallic phases. The corrosion behaviour of the surface alloyed specimens in 3.5% NaCl solution at 23 °C was also determined by electrochemical techniques. The laser-alloyed surface showed an improved corrosion and pitting potential compared to the substrate as well as the plated Ni–P coating.     

Fidelity of Two-Particle Wave Packets Moving around the Schwarzschild Spacetime

Fidelity for two-particle wave packets of spin- particles moving around the Schwarzschild spacetime is discussed. Both acceleration and gravity cause to produce a Wigner rotation that transforms the wave packet as it moves along a specified path in the gravitational field. For considered circular paths, the fidelity between the spin parts of initial and final states of the system, called the spin fidelity, is obtained as a function of angular velocity, elapsed proper time and radius of circular paths. For fixed elapsed proper time and angular momentum of the centroid, there always exists one circular orbit with determined radius on which the fidelity of spin parts is minimum. Using a numerical approach, the behavior of the spin fidelity in terms of the angular velocity, as well as the radius of paths is described for both the spin singlet and spin triplet states.     

High-resolution optical correlation imaging in a scattering medium

An optical correlation setup is used to image transparent objects through scattering media, and 10-mum longitudinal and 2.5-mum transverse resolution are achieved. Spectral-bandwidth sampling of the light source is made possible by a tunable dye laser and leads to signal enhancement as a result of sampling interferogram filtering. An optical system allows observation of sample slices without the need for a translation stage.     

Exact solutions of the generalized Lane–Emden equations of the first and second kind

In this paper we discuss the integrability of the generalized Lane–Emden equations of the first and second kinds. We carry out their Noether symmetry classification. Various cases for the arbitrary functions in the equations are obtained for which the equations have Noether point symmetries. First integrals of such cases are obtained and also reduction to quadrature of the corresponding Lane–Emden equations are presented. New cases are found.