Nonlinear electrokinetics and "superfast" electrophoresis

Nonlinear and nonequilibrium electrophoresis of spherical particles of radius a is shown to be possible when the solid surface allows field or current penetration. At low particle Peclet numbers, transient capacitative charging occurs until the surface polarization completely screens the external field. For a DC applied field [see text], the resulting electrokinetic velocity reaches Dukhin's maximum value of [formula: see text], where [see text] and mu are the liquid permittivity and viscosity. At high Peclet numbers, electroosmotic convection of the electroneutral bulk stops the transient charging before complete field-line exclusion. For an ion-selective and conducting spherical granule, the polarization is then determined by the steady-state Ohmic current driven by the penetrated external field. The high-Peclet electrokinetic velocity is lower, diffusivity-dependent and scales as [see text].     

Crystal Structures and Magnetic Studies of Naphthalene Derivatives Containing Nitronly Nitroxides

Crystal structures of new nitronyl nitroxide derivatives 1, 2 and 3 were determined with X‐ray diffraction analysis: 1, monoclinic, C₂/c, a = 1.2404(5) nm, b = 0.9730(5) um, c = 2.7049(10) ran, β = 98.189(15)°, V = 3.2315(24) nm³, Z = 8; 2, or‐thorhombic, Pbca, a = 0.61262(2) nm, b = 1.11426(6) nm, c = 2.30543(13) nm, V = 1.57373(13) nm³, Z = 4; 3, monoclinic, P2(1)/n, a=0.64253(4) nm, b=2.55003(17) nm, c = 1.15497(6) nm, β = 95.000(3)°, V = 1.8852(2) nm³, Z = 4. Their magnetic properties were measured with SQUID and analyzed based on their crystal structures with simple singlet‐triplet, modified one dimensional antiferromagnetic chain and modified singlet‐triplet models respectively: 1, J/k_b= ?2.5 K; 2, J/k_b = 7.8 K, θ = 2.8 K; 3, J/k_b = ?0.96 K, θ = 0.21 K.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

New theoretical expressions for the five adsorption type isotherms classified by BET based on statistical physics treatment

New theoretical expressions to model the five adsorption isotherm types have been established. Using the grand canonical ensemble in statistical physics, we give an analytical expression to each of five physical adsorption isotherm types classified by Brunauer, Emett, and Teller, often called BET isotherms. The establishment of these expressions is based on statistical physics and theoretical considerations. This method allowed estimation of all the mathematical parameters in the models. The physicochemical parameters intervening in the adsorption process that the models present could be deduced directly from the experimental adsorption isotherms by numerical simulation. We determine the adequate model for each type of isotherm, which fixes by direct numerical simulation the monolayer, multilayer, or condensation character. New equations are discussed and results obtained are verified for experimental data from the literature. The new theoretical expressions that we have proposed, based on statistical physics treatment, are rather powerful to better understand and interpret the various five physical adsorption type isotherms at a microscopic level.     

Highly enantioselective Cu-catalysed asymmetric 1,4-addition of diphenylzinc to cyclohexenone

Highly enantioselective Cu-catalysed 1,4-addition of diphenylzinc to cyclohexenone has been achieved for the first time using a monodentate phosphoramidite ligand.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

Simultaneously achieving high capacity storage and multilevel anti-counterfeiting using electrochromic and electrofluorochromic dual-functional AIE polymers

With the advent of the big data era, information storage and security are becoming increasingly important. However, high capacity information storage and multilevel anti-counterfeiting are typically difficult to achieve simultaneously. To address this challenge, herein, two electrochromic and electrofluorochromic dual-functional polymers with aggregation-induced emission (AIE) characteristics were rationally designed and facilely prepared. Upon applying voltages, the absorption and fluorescence spectra of the AIE polymers can undergo reversible changes, accompanied by variation of their color and emission. By utilizing the controllable characteristics of the polymers, dual-mode display devices were fabricated via a simple spraying technique. More interestingly, a four-dimensional color code device was constructed by adding color change multiplexing to the two-dimensional space, thereby achieving high capacity information storage. Moreover, the color code device can also be applied in the multilevel anti-counterfeiting area. The encrypted information can be dynamically converted under different voltages. Thus, the AIE polymers show great promise for applications in multidimensional information storage and dynamic anti-counterfeiting, and the design strategy may provide a new avenue for advanced information storage and high security technology.

By using electrical stimuli-responsive AIE polymers, dual-mode display devices, multidimensional information storage and anti-counterfeiting devices were constructed.     

Rapid synthesis of pomalidomide-conjugates for the development of protein degrader libraries

Current methods for the preparation of heterobifunctional pomalidomide-conjugates rely on methods that are often low yielding and produce intractable byproducts. Herein we describe our strategy for the reliable and succinct preparation of pomalidomide-linkers which is essential to the formation of these conjugates. We present the preparation of 18 pomalidomide-linkers in high yield compared to current literature methods. Our findings show that secondary amines consistently afford greater yields than their primary counterparts, a trend that we were able to exploit in the synthesis of several new pomalidomide homo-dimers in enhanced yields compared to similar literature syntheses. This trend was further utilised to develop the first one-pot synthesis of JQ1-pomalidomide conjugates in yields up to 62%, providing a method that is suited to rapid preparation of conjugate libraries as is frequently required for the development of new protein degraders.

Current methods for the preparation of heterobifunctional pomalidomide-conjugates rely on methods that are often low yielding and produce intractable byproducts. Herein we describe our strategy for the succinct preparation of pomalidomide-linkers.     

Diffusion-induced Spatio-temporal Oscillations in an Epidemic Model with Two Delays

We investigate a diffusive, stage-structured epidemic model with the maturation delay and freelymoving delay. Choosing delays and diffusive rates as bifurcation parameters, the only possible way to destabilize the endemic equilibrium is through Hopf bifurcation. The normal forms of Hopf bifurcations on the center manifold are calculated, and explicit formulae determining the criticality of bifurcations are derived. There are two different kinds of stable oscillations near the first bifurcation: ...     

Constructing banking networks under decreasing costs of link formation

The structure of networks plays a central role in the behavior of financial systems and their response to policy. Real-world networks, however, are rarely directly observable: banks’ assets and liabilities are typically known, but not who is lending how much and to whom. This paper adds to the existing literature in two ways. First, it shows how to simulate realistic networks that are based on balance-sheet information. To do so, we introduce a model where links cause fixed-costs, independent of contract size; but the costs per link decrease the more connected a bank is (scale economies). Second, to approach the optimization problem, we develop a new algorithm inspired by the transportation planning literature and research in stochastic search heuristics. Computational experiments find that the resulting networks are not only consistent with the balance sheets, but also resemble real-world financial networks in their density (which is sparse but not minimally dense) and in their core-periphery and disassortative structure.