Cu-Doped ZnO Nanoparticles for Non-Enzymatic Glucose Sensing

Copper-doped zinc oxide nanoparticles (NPs) Cu_xZn_1−xO (x = 0, 0.01, 0.02, 0.03, and 0.04) were synthesized via a sol-gel process and used as an active electrode material to fabricate a non-enzymatic electrochemical sensor for the detection of glucose. Their structure, composition, and chemical properties were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) and Raman spectroscopies, and zeta potential measurements. The electrochemical characterization of the sensors was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). Cu doping was shown to improve the electrocatalytic activity for the oxidation of glucose, which resulted from the accelerated electron transfer and greatly improved electrochemical conductivity. The experimental conditions for the detection of glucose were optimized: a linear dependence between the glucose concentration and current intensity was established in the range from 1 nM to 100 μM with a limit of detection of 0.7 nM. The proposed sensor exhibited high selectivity for glucose in the presence of various interfering species. The developed sensor was also successfully tested for the detection of glucose in human serum samples.     

Isotropic hard core dumbell fluid: Equation of state

A monte-Carlo calculation has been made for 108 hard core dumbbells of the compressibility factor in the isotropic density range. These compressibility factors are compared to several approximate theories, and comments are made on the utility of these approximate theories.     

Vibronic coupling in asymmetric bichromophores: Theory and application to diphenylmethane

The theory for modeling vibronic interactions in bichromophores was introduced in sixties by Witkowski and Moffitt [J. Chem. Phys. 33, 872 (1960)] and extended by Fulton and Gouterman [J. Chem. Phys. 35, 1059 (1961)]. The present work describes extension of this vibronic model to describe bichromophores with broken vibrational symmetry such as partly deuterated molecules. Additionally, the model is extended to include inter-chromophore vibrational modes. The model can treat multiple vibrational modes by employing Lanczos diagonalization procedure of sparse matrices. The developed vibronic model is applied to simulation of vibronic spectra of flexible bichromophore diphenylmethane and compared to high-resolution experimental spectra [J. A. Stearns, N. R. Pillsbury, K. O. Douglass, C. W. Mu?ller, T. S. Zwier, and D. F. Plusquellic, J. Chem. Phys. 129, 224305 (2008)].     

C-O and C-C bond formation in the cyclisation of gem-(dialkoxymethyl)-1,6-dienes catalysed by tin(IV) triflimidate at room temperature

We described herein a Sn(NTf₂)₄-catalysed cyclisation of gem-(dialkoxymethyl)-1,6-dienes and derivatives where cyclohexane or tetrahydrofuran rings are formed following either a 6-enexo-endo-trig process or a 5-exo-trig process, respectively, depending on substitution patterns. The latter process features an unusual dealkylative ether cyclisation, triggered by the strong Lewis acid character of the tin(IV) triflimidate catalyst.     

A novel carbon/chitosan paste electrode for electrochemical detection of normetanephrine in the urine

Normetanephrine is a marker for pheochromocytoma, a rare catecholamine-secreting and neuroendocrine tumor, that arises from sympathetic and parasympathetic paraganglia. In this work, a novel carbon/chitosan electrode paste was used for sensitive voltammetric determination of normetanephrine and dopamine in the presence of ascorbic acid and uric acid. The modified electrode has shown an increase in the effective area of up to 68%, well-separated oxidation peaks, and an excellent electrocatalytic activity. The electrochemical response characteristics were investigated by cyclic and differential pulse voltammetry. Interestingly, high sensitivity and selectivity in the linear range of normetanephrine, dopamine, ascorbic acid, and uric acid concentrations were observed. The present method was applied in the urine sample and satisfactory results were obtained showing that this electrode is very suitable in pharmaceutical and clinical preparations.     

超疏水多孔阵列碳纳米管薄膜

碳纳米管由于具有特异的力学[1] 、光学[2 ] 、电学[3,4 ] 和磁学性质[5] ,使其在锂离子电池[6 ] 和平板展示器[7] 等方面呈现出广泛的应用前景 .Ebbesen等[8] 对无序碳纳米管材料的浸润性进行了详细研究 ,发现其很容易被水润湿 .然而 ,阵列碳纳米管膜的浸润性研究尚未见报道 .固体表面的浸润性主要由表面化学组分和几何结构两方面控制 .通常 ,加大表面粗糙度可以增强其浸润性 [9～ 16 ] .近来 ,超疏水表面 (即与水的接触角大于 1 5 0°的表面 )的研究显示了广泛的应用背景[13～ 16 ] .这种表面通常可由增加表面粗糙度和降低表面能来制备[1…     

A general powder dusting method for latent fingerprint development based on AIEgens

Powder dusting method is the most practically useful approach for latent fingerprint development in the crime scene. Herein, a general powder dusting method has been explored for latent fingerprint development based on aggregation-induced emission luminogens (AIEgens). A series of tetraphenylethene (TPE) derivatives with multiple diphenylamine (DPA), namely, TPE-DPA, TPE-2DPA and TPE-4DPA, were selected as candidates to dope with magnetic powders and applied for latent fingerprint development. After screening, the magnetic powder 3 doped with TPE-4DPA proves to be the best, in terms of fluorescent intensity, resolution and adhesiveness. Afterwards, the magnetic powder 3 was applied for visualization of latent fingerprint on various smooth and porous substrates, including glass, stainless steel, leaf, ceram, plastic bag, lime wall, wood and paper money. Specific details, such as island, core, termination and bifurcation, can be clearly observed for the fluorescent fingerprint images.     

Multiplexed imaging detection of live cell intracellular changes in early apoptosis with aggregation-induced emission fluorogens

Apoptosis is an important process for maintaining tissue homeostasis and eliminating abnormal cells in multicellular organisms. Abnormality in apoptosis often leads to severe diseases such as cancers. Better understanding of its mechanisms and processes is therefore important. Accompanying molecular biology events of apoptosis is a series of cellular morphology changes: nucleus condensation, cell shrinkage and rounding, cell surface blebbing, dynamic blebbing, apoptotic membrane protrusions and nucleus fragmentations and finally, the formation and release of apoptotic bodies. It is difficult to detect cellular changes in the early phase of apoptosis due to the subtle changes at this phase. In the current study, we induced apoptosis in HeLa cells with H₂O₂ and used nuclear dye Hoechst 33258, mitochondria, lysosome and cytoplasmic protein specific aggregation-induced emission fluorogens (AIEgens), TPE-Ph-In, 2M-DABS and BSPOTPE to successfully perform live cell multiplexed imaging to investigate early apoptosis cellular events. We showed the gradual dissipation of mitochondria membrane potential until it is nondetectable by TPE-Ph-In. Increased mitophagy detected by TPE-Ph-In and 2M-DABS, condensed nucleus detected by Hoechst 33258, increased permeability and/or reduced integrity of nuclear membrane, and increased intracellular vesicles detected by 2M-DABS are some of the early events of apoptosis.     

Manipulation of Molecular Aggregation States to Realize Polymorphism,AIE, MCL,and TADF in a Single Molecule

Multifunctional emitting materials are scarce and need to be further explored. Now, a newly anthraquinone derivative, 2‐(phenothiazine‐10‐yl)‐anthraquinone (PTZ‐AQ) was designed and synthesized and found to demonstrate polymorphism, multi‐color emission, aggregation‐induced emission (AIE), mechanochromic luminescence (MCL), and thermally activated delayed fluorescence (TADF) in its different solid forms. It is shown for the first time that TADF properties of a compound can be systematically tuned via its aggregation state. The optimized PTZ‐AQ crystal shows a small singlet–triplet energy splitting of 0.01 eV and exhibits red TADF with a photoluminescence quantum yield as high as 0.848. This study shows that the unique multiple functions can be integrated into one single compound through controlling the aggregation states, which provides a new strategy for the investigation and application of multifunctional organic materials.