Gas chromatography–triple-quadrupole mass spectrometry for analysis of selected polyhalogenated pollutants in plants. Comparison of extraction methods

Different extraction methods, followed by gas chromatography coupled to triple quadrupole mass spectrometry, were evaluated for simultaneous extraction of seven polychlorinated biphenyls (PCBs) and six polybrominated diphenyl ethers (PBDEs) from common weeds. Pressurized liquid extraction (PLE) with in-cell clean-up, ultrasound-assisted extraction (UAE) with in-column clean-up, and UAE with dispersive solid-phase extraction (dSPE) clean-up were evaluated and compared. In-cell clean-up with 4 g Florisil and 0.5 g graphitized carbon black (GCB) and two extraction cycles of 10 min with n-hexane–ethyl acetate 80:20 (v/v) at 60 °C were used for the PLE procedure. UAE with in-column clean-up was conducted under conditions similar to those reported for the PLE method whereas in UAE with dSPE clean-up purification of the extract was performed after extraction using primary and secondary amine sorbent (PSA) and GCB. Recovery from 82 to 104 % was obtained for all the compounds by PLE whereas, in general, lower extraction efficiency was obtained by UAE with in-column clean-up (especially for BDE-17 and BDE-183, for which recovery was 70 and 41 %, respectively) and by UAE with dSPE clean-up, for which the main drawback is that BDE-183 cannot be extracted. Finally, PLE was used for analysis of PCBs and PBDEs in different plants (Lolium rigidum, Lactuca serriola, Malva sylvestris, and Verbascum thapsus) collected from residential and/or rural areas of Madrid (Spain). Several of the analyzed compounds were detected at low levels in these plants, but only PCB-153 could be quantified.

Synthesis of New Five Membered Nitrogen Containing Heterocycles Bearing D-Galactose Side Chains

The synthesis of 5-[6′-deoxy-(1′,2′:3′,4′-di-O-isopropylidene-α-D-galactopyranos-6′-yl)]tetrazole and its reaction with acetic anhydride and 1,2:3,4-di-O-isopropylidene-6-O-(4-toluenesulfonyl)-α-D-galactopyranose are described.     

Effect of Concentration on the Photophysics of Dyes in Light‐Scattering Materials.

Photoactive materials based on dye molecules incorporated into thin films or bulk solids are useful for applications as photosensitization, photocatalysis, solar cell sensitization and fluorescent labeling, among others. In most cases, high concentrations of dyes are desirable to maximize light absorption. Under these circumstances, the proximity of dye molecules leads to the formation of aggregates and statistical traps, which dissipate the excitation energy and lower the population of excited states. The search for enhancement of light collection, avoiding energy wasting requires accounting the photophysical parameters quantitatively, including the determination of quantum yields, complicated by the presence of light scattering when particulate materials are considered. In this work we summarize recent advances on the photophysics of dyes in light‐scattering materials, with particular focus on the effect of dye concentration. We show how experimental reflectance, fluorescence and laser‐induced optoacoustic spectroscopy data can be used together with theoretical models for the quantitative evaluation of inner filter effects, fluorescence and triplet formation quantum yields and energy transfer efficiencies.     

Antioxidant Activity Degradation,Formulation Optimization,Characterization, and Stability of Equisetum Arvense Extract Nanoemulsion

Equisetum arvense supercritical CO₂ extracts (EAE) contained an initial antioxidant activity of 10.3 mM TEAC that suffered a sharp first order kinetics decay characterized by half-life time (t_1/2) of 1.05 ± 0.03 and 0.86 ± 0.03 weeks at 25 and 4°C, respectively. The aim of the present work was to develop a nanoemulsion formulation for providing EAE protection against deleterious environmental factors and extending its shelf-life functionality. The nanoemulsion area was identified by constructing pseudoternary phase diagrams and response surface methodology was used to optimize the preparation conditions. The best formulation achieved an EAE encapsulation efficiency of 97.5 ± 0.5% and antioxidant activity half-life time (t_1/2) was extended to 12.32 ± 0.40 and 14.56 ± 0.60 weeks at 25 and 4°C, respectively.      

A Click Approach to Polymetallic Chromium(0) and Tungsten(0) Fischer‐Carbene Complexes and Their Use in the Synthesis of Functionalized Polymetallic Metal?Carbene Complexes

Alkynylamino Cr⁰ and W⁰ Fischer carbenes undergo a CuAAC reaction with a diverse range of di‐, tri‐, and tetra‐azides to produce polymetallic chromium(0) and tungsten(0) (Fischer)‐carbene complexes in good‐to‐excellent yields. This method is simple, versatile, and is suitable for the preparation of a diverse range of structures with a high level of symmetry. Moreover, the resulting polymetallic carbene complexes are suitable partners for the peripheral functionalization of the metal nuclei, whilst retaining the metal fragment. This fact has been demonstrated in a simultaneous Pauson–Khand reaction, which, in some cases, allows for the generation of four bicyclic [5,5] rings on the periphery of a tetrametallic molecule in a process that involves the formation of 12 new C? C bonds, with four simultaneous CO‐insertion processes. The electrochemistry of the polymetallic Fischer carbenes show completely independent behavior for each nucleus, as well as an anomalous observation of the reversible oxidation of the allyl substituents, which has not been reported before in this class of chemistry.     

Proton‐Assisted Hydrogen Activation on Polyhedral Cations

The treatment of [1,1‐(PR₃)₂‐3‐(Py)‐closo‐1,2‐RhSB₉H₈] (PR₃=PMe₃ ( 2 ) or PPh₃ and PMe₃ ( 3 ); Py=pyridine) with triflic acid (TfOH) affords [1,3‐μ‐(H)‐1,1‐(PR₃)₂‐3‐(Py)‐1,2‐RhSB₉H₈]⁺ (PR₃=PMe₃ ( 4 ) or PMe₃ and PPh₃ ( 5 )). These products result from the protonation of the 11‐vertex closo‐cages along the Rh(1)? B(3) edge. These unusual cationic rhodathiaboranes are stable in solution and in the solid state and they have been fully characterized by multinuclear NMR spectroscopy. In addition, compound 5 was characterized by single‐crystal X‐ray diffraction. One remarkable feature in these structures is the presence of three {Rh(PPh₃)(PMe₃)}‐to‐{ηⁿ‐SB₉H₈(Py)} (n=4 or 5) conformers in the unit cell, thus giving an uncommon case of conformational isomerism. [1,1‐(PPh₃)₂‐3‐(Py)‐closo‐1,2‐RhSB₉H₈] ( 1 ), that is, the bis‐PPh₃‐ligated analogue of compounds 2 and 3 , is also protonated by TfOH, but, in marked contrast, the resulting cation, [1,3‐μ‐(H)‐1,1‐(PPh₃)₂‐3‐(Py)‐1,2‐RhSB₉H₈]⁺ ( 6 ), is attacked by a triflate anion with the release of a PPh₃ ligand and the formation of [8,8‐(OTf)(PPh₃)‐9‐(Py)‐nido‐8,7‐RhSB₉H₉] ( 9 ). The result is an equilibrium that involves cationic species 6 , neutral OTf‐ligated compound 9 , and [HPPh₃]⁺, which is formed upon protonation of the released PPh₃ ligand. The resulting ionic system reacts readily with H₂ to give cationic species [8,8,8‐(H)(PPh₃)₂‐9‐(Py)‐nido‐8,7‐RhSB₉H₉]⁺ ( 7 ). This reactivity is markedly higher than that previously found for compound 1 and it introduces a new example of proton‐assisted H₂ activation that occurs on a polyhedral boron‐containing compound.     

Controlled Click‐Assembly of Well‐Defined Hetero‐Bifunctional Cubic Silsesquioxanes and Their Application in Targeted Bioimaging

A general procedure for the assembly of hetero‐bifunctional cubic silsesquioxanes with diverse functionality and a perfectly controlled distribution of functional groups on the inorganic framework has been developed. The method is based on a two‐step sequence of mono‐ and hepta‐functionalization through the ligand‐accelerated copper(I)‐catalyzed azide–alkyne cycloaddition of a readily available octaazido cubic silsesquioxane. The stoichiometry of the reactants and the law of binomial distribution essentially determine the selectivity of the key monofunctionalization reaction when a copper catalyst with strong donor ligands is used. The methodology has been applied to the preparation of a set of bifunctional nano‐building‐blocks with orthogonal reactivity for the controlled assembly of precisely defined hybrid nanomaterials and a fluorescent multivalent probe for application in targeted cell‐imaging. The inorganic cage provides an improved photostability to the covalently attached dye as well as a convenient framework for the 3D multivalent display of the pendant epitopes. Thus, fluorescent bioprobes based on well‐defined cubic silsesquioxanes offer interesting advantages over more conventional fully organic analogues and ill‐defined hybrid nanoparticles and promise to become powerful tools for the study of cell biology and for biomedical applications.     

Reactivity Studies of Iridium Pyridylidenes [TpMe2Ir(C6H5)2(C(CH)3C(R)NH] (R=H,Me, Ph)

The reactivity of a series of iridium? pyridylidene complexes with the formula [Tp^Me2Ir(C₆H₅)₂(C(CH)₃C(R)N H] ( 1 a – 1 c ) towards a variety of substrates, from small molecules, such as H₂, O₂, carbon oxides, and formaldehyde, to alkenes and alkynes, is described. Most of the observed reactivity is best explained by invoking 16 e^? unsaturated [Tp^Me2Ir(phenyl)(pyridyl)] intermediates, which behave as internal frustrated Lewis pairs (FLPs). H₂ is heterolytically split to give hydride? pyridylidene complexes, whilst CO, CO₂, and H₂C?O provide carbonyl, carbonate, and alkoxide species, respectively. Ethylene and propene form five‐membered metallacycles with an IrCH₂CH(R)N (R=H, Me) motif, whereas, in contrast, acetylene affords four‐membered iridacycles with the IrC(?CH₂)N moiety. C₆H₅(C?O)H and C₆H₅C?CH react with formation of Ir? C₆H₅ and Ir? C?CPh bonds and the concomitant elimination of a molecule of pyridine and benzene, respectively. Finally the reactivity of compounds 1 a – 1 c against O₂ is described. Density functional theory calculations that provide theoretical support for these experimental observations are also reported.     

Efficient Green‐Light‐Emitting Electrochemical Cells Based on Ionic Iridium Complexes with Sulfone‐Containing Cyclometalating Ligands

A new approach to obtain green‐emitting iridium(III) complexes is described. The synthetic approach consists of introducing a methylsulfone electron‐withdrawing substituent into a 4‐phenylpyrazole cyclometalating ligand in order to stabilize the highest‐occupied molecular orbital (HOMO). Six new complexes have been synthesized incorporating the conjugate base of 1‐(4‐(methylsulfonyl)phenyl)‐1 H‐pyrazole as the cyclometalating ligand. The complexes show green emission and very high photoluminescence quantum yields in both diluted and concentrated films. When used as the main active component in light‐emitting electrochemical cells (LECs), green electroluminance is observed. High efficiencies and luminances are obtained at low driving voltages. This approach for green emitters is an alternative to the widely used fluorine‐based substituents in the cyclometalating ligands and opens new design possibilities for the synthesis of green emitters for LECs.