New 4-pentafluorosulfanyl and 4-perfluoroalkylthio derivatives of 1-chloro-2-nitro- and 1-chloro-2,6-dinitrobenzenes

New 4-pentafluorosulfanyl and 4-perfluoroalkylthio derivatives of 1-chloro-2-nitrobenzene and 1-chloro-2,6-dinitrobenzene were prepared from the corresponding bis(4-chloro-3-nitrophenyl)disulfide and bis(4-chloro-3,5-dinitrophenyl)disulfide, respectively. The SF₅ derivatives were obtained by fluorination of the disulfides with AgF₂ according to Sheppard’s method, while perfluoroalkylation was carried out by means of thermolytic reactions with xenon(II) bis(perfluoroalkylcarboxylates). The introduction of fluorine-containing, electron-withdrawing substituents into the aromatic ring (in the presence of other deactivating groups) reinforces the activation of the halogen substituent towards nucleophilic attack. Several nucleophilic substitution reactions have been carried out with these compounds, and as a result, some N- and S-containing groups were introduced in the benzene ring. For example, the previously unknown SF₅, CF₃S, and C₂F₅S analogues of trifluralin (Treflan^®) were prepared and characterized. Additional synthetic possibilities for heterocyclic chemistry are presented on the basis of reactions of the new 1-chloro-2,6-dinitrobenzene derivatives with ethyl thioglycolate wherein fluorine-containing derivatives of benzothiazole N-oxide were obtained as the main products.     

The identification of blowing agents in cellular PVC compounds by DSC Part 1. The detection and identification of sodium bicarbonate

The determination of sodium bicarbonate concentrations in PVC cellular compounds by DSC has revealed a linear relationship between concentration and the decomposition enthalpy of the compound. Both the detection limit and the sensitivity of the method are reported. Furthermore, it is shown that the detection limit is significantly less than the concentration of the compound known to be present in typical cellular polymer formulations. Therefore, the DSC method described herein could be used for the analysis and quality control of sodium bicarbonate in PVC cellular compounds.     

Simultaneous analysis of prostanoids using liquid chromatography/high-field asymmetric waveform ion mobility spectrometry/tandem mass spectrometry

A liquid chromatography/high-field asymmetric waveform ion mobility spectrometry/tandem mass spectrometry (LC-FAIMS-MS/MS) semi-quantitative method was developed for the simultaneous determination of prostaglandin (PG) E2, PGD2, PGF(2alpha), 6-keto-PGF(1alpha), and thromboxane (TX) B2. Diluted samples containing these prostanoids and their tetra-deuterium-substituted internal standards were analyzed by LC followed by either selected reaction monitoring (LC-SRM) or FAIMS and selected reaction monitoring (LC-FRM). FAIMS reduced background noise, separated the isobaric ions PGE2 and PGD2, and separated dynamically interchanging TXB2 anomers. This is the first report of the separation of interconverting anomers by FAIMS. Generally, the LC-FRM chromatograms were more selective than the LC-SRM chromatograms. Its potential was demonstrated by analysis of prostanoids in guinea pig lumbar spinal cord homogenate.     

Biodegradation of chemically modified wheat gluten-based natural polymer materials

Biodegradation of a series of chemically modified thermally processed wheat gluten (WG)-based natural polymers were examined according to Australian Standard (AS ISO 14855). Most of these materials reached 93-100% biodegradation within 22 days of composting, and the growth of fungi and significant phase deformation were observed during the process. Chemical crosslinking did slow down the rate or reduce the degree of the biodegradation with different behaviours for different modified systems. The segments containing structures derived from the reactions with additives such as tannin or epoxidised soybean oil remained in the degradation residues while the glycidoxypropyl trimethoxysilane agent produced ∼20% un-degraded residues containing silicon-crosslinking structures. The biodegradation rate of each component of the materials was also different with the protein and starch components degraded fast but lipid degraded relatively slowly.     

A test strip for diamines in tuna.

This study describes the production of a solid-phase assay (test strip/dipstick test) for putrescine and cadaverine in tuna based on the coupling of an amine oxidase to a peroxidase/dye system. The assay was linear to 75 microM in phosphate buffer, and the minimum detectable concentration was 0.5 microM (< 0.1 ppm), corresponding to 0.01 mg% in spiked extracts. Intra- and interassay precisions were < 20%. Test strips were stable at 4 degrees C for at least 12 months. Lysine, ornithine, and histidine did not react with the assay, and histamine reacted only minimally. Sixteen fish samples were tested by test strip and the standard AOAC protocol, and results were in good agreement.     

Electrochemical properties of capillary electrophoresis-nanoelectrospray mass spectrometry

Electrochemical properties are inherent to the techniques of electrophoresis and electrospray ionization. Interfacing capillary zone electrophoresis (CZE) with electrospray mass spectrometry (ESMS) can lead to the observation of oxidized species generated as a result of the electrochemical nature of this coupling. Using a nanoelectrospray (nES) interface combined with CZE, controlled chemical oxidation of peptides is demonstrated. The electrolysis of water is used to explain the origin of the chemically oxidized species and this is confirmed using experiments with ¹⁸O labeled water. Identification of the oxidized residues was possible using tandem mass spectrometry to sequence the modified peptides. Methionine was found to be the most readily oxidized residue, followed by aromatic amino acids. Surprisingly, oxidation of aliphatic residues (leucine) was also observed. Addition of a reducing agent to the CZE buffer was found to reduce, but not eliminate, the extent of oxidation. The electrochemical generation of protons at the electrosprayer was used to assist in the analysis of monophosphate nucleotides. Nucleotides were separated as anions followed by detection as [M + H]⁺ ions.     

Matrix-assisted laser desorption/ionization-collision induced dissociation of poly(styrene)

Matrix-assisted laser desorption/ionization-collision induced dissociation (MALDI-CID) has been employed for the analysis of poly(styrene) in a tandem hybrid sector-time of flight instrument. Spectra are shown for adducts of poly(styrene) with copper and silver ions. The distributions of fragment ion peaks were found to be consistent from precursor ions containing both metal ions. It is shown how the masses of the end groups of the polymer may be inferred from the mass-to-charge ratios of two of the series of ion peaks that are seen in the MALDI-CID spectra. Mechanisms are proposed for the formation of some of the other series of ion peaks that are observed in the spectra.     

Analytical performance of a high-pressure radio frequency-only quadrupole collision cell with an axial field applied by using conical rods

The effect on triple-quadrupole performance of applying an axial field, in an rf-only quadrupole collision cell operated at pressures sufficiently high that collisional focusing is operating, has been investigated. The advantages of such cells have been shown previously to include increased transmission and much improved resolution in fragment ion spectra relative to the performance of collision cells operating at lower gas pressures. The disadvantages of high-pressure collision cells all derive from the relatively long transit times for the ions, which can be long relative to characteristic times for scanning the first mass filter (precursor ion selector) or for switching its setting in multiple reaction monitoring (MRM) cycles. The present work describes experiments on a high-pressure cell in which an axial field is created through use of conical rather than cylindrical or hyperbolic rods. In addition, results of computations of the electric fields within such a cell, and of ion trajectories through it, are presented. It is shown that application of axial fields of the order of 0. 1 V/cm can remove all hysteresis effects associated with the long ion transit times, and thus provide excellent performance in quantitation work using MRM, as well as in other scan modes. Furthermore, the advantages of collisional focusing in quadrupole collision cells are shown to be unimpaired by these low axial fields.     

Film Growth and Surface Roughness with Effective Fluctuating Covalent Bonds in Evaporating Aqueous Solution of Reactive Hydrophobic and Polar Groups: A Computer Simulation Model

Summary: A computer simulation model is proposed to study film growth and surface roughness in aqueous (A) solution of hydrophobic (H) and hydrophilic (P) groups on a simple three dimensional lattice of size with an adsorbing substrate. Each group is represented by a particle with appropriate characteristics occupying a unit cube (i.e., eight sites). The Metropolis algorithm is used to move each particle stochastically. The aqueous constituents are allowed to evaporate while the concentration of H and P is constant. Reactions proceed from the substrate and bonded particles can hop within a fluctuating bond length. The film thickness ( ) and its interface width ( ) are examined for hardcore and interacting particles for a range of temperature ( ). Simulation data show a rapid increase in and followed by its non‐monotonic growth and decay before reaching steady‐state and near equilibrium ( ) in asymptotic time step limit. The growth can be described by power laws, e.g., with a typical value of in initial time regime followed by at . For hardcore system, the equilibrium film thickness ( ) and surface roughness ( ) seem to scale linearly with the temperature, i.e., at low and at higher . For interacting functional groups in contrast, the long time (unsaturated) film thickness and surface roughness, and decay rapidly followed by a slow increase on raising the temperature.

Growth of the average film thickness at a temperature .