Quantitation of chlordiazepoxide and its metabolites in biological fluids by thin-layer chromatography.

Chlordiazepoxide and its 4 major metabolites were assayed after separation by thin-layer chromatography following extraction from biological fluids. The compounds become intensely fluorescent in the presence of red, fuming nitric acid. The resulting compounds are quantitated with a spectrodensitometer with a fluorescent attachment. The sensitivity varies between 0.05 and 0.1 microgram. The coefficient of variation is 1.4% for assays in urine and 6.4% in serum.     

Tuning the band gap in hybrid tin iodide perovskite semiconductors using structural templating

Structural distortions within the extensive family of organic/inorganic hybrid tin iodide perovskite semiconductors are correlated with their experimental exciton energies and calculated band gaps. The extent of the in- and out-of-plane angular distortion of the SnI4(2-) perovskite sheets is largely determined by the relative charge density and steric requirements of the organic cations. Variation of the in-plane Sn-I-Sn bond angle was demonstrated to have the greatest impact on the tuning of the band gap, and the equatorial Sn-I bond distances have a significant secondary influence. Extended Hückel tight-binding band calculations are employed to decipher the crystal orbital origins of the structural effects that fine-tune the band structure. The calculations suggest that it may be possible to tune the band gap by as much as 1 eV using the templating influence of the organic cation.     

Efficient and practical Ag-catalyzed cycloadditions between arylimines and the Danishefsky diene

An efficient Ag-catalyzed method for asymmetric addition of the Danishefsky diene to various aryl imines to afford cycloadducts in > or =89% ee and > or =85% isolated yield is reported. Reactions are effected with 0.1-1 mol % catalyst (4 degrees C), and the chiral ligand is readily prepared from commercially available materials, including the inexpensive i-Leu. These catalytic asymmetric cycloadditions can be carried out without the use of solvent or with undistilled THF in air. A first generation supported chiral catalyst that effectively promotes the cycloaddition reaction and can be recycled (five cycles) is described.     

Reactions of 1-Allenylpyrazole and 1-Allenyl-1,2,4-triazole with Hydrogen Chloride and Metal Chlorides

1-Allenylpyrazole and 1-allenyl-1,2,4-triazole react with hydrogen chloride via proton addition at the pyridine-like nitrogen atom (N² and N⁴, respectively). In the reaction with 1-allenylpyrazole, 1-[(E)-3-chloro-1-propenyl]pyrazole is also formed via regio- and stereoselective addition of hydrogen chloride to the propadienyl group. 1-Allenylpyrazole and 1-allenyl-1,2,4-triazole act as unidentate ligands with respect to Co, Ni, Cu, Zn, Cd, Pd, and Sn, the donor centers being N² and N⁴, respectively. Apart from mononuclear coordination compounds, 1-allenylpyrazole gives rise to polymeric complexes which contain units and blocks formed by the free ligand.     

Thermal rearrangements of 2-vinylcyclopropylidene to cyclopentadiene and vinylallene: a theoretical investigation

In an attempt to clarify the favored rearrangement reaction of vinylcyclopropylidenes, the prototype thermal rearrangements of singlet 2-vinylcyclopropylidene (1) leading to 1,3cyclopentadiene (2) and 1,2,4-pentatriene (vinylallene) (3) were investigated by means of ab initio quantum-mechanical electronic-structure calculations. The B3LYP functional with the 6-31G(d) basis set was employed for geometry optimization of the equilibrium and transition-state structures relevant to the two reaction pathways and for computing their harmonic vibrational frequencies. Final energies were evaluated by single-point calculations at the CCSD(T) level of theory with the 6-311 + G(3df,2p) basis set. The rearrangement of s-cis 1 to 2 is found to occur by a three-step pathway. The first step involves the formation of a nonclassical carbene (5), which is an internal pi complex between the pi molecular orbital of the double bond and the empty p atomic orbital of the carbene carbon. In the second step, the nonplanar five-membered ring geometry of 5 flattens to reach the planar structure of 3-cyclopentenylidene (4). The last step is the 1,2-migration of a alpha-hydrogen atom to the carbene center in 4. The rate-determining step for the rearrangement of s-cis 1 to 2 is the formation of 5, with a predicted global deltaG++(220 K) of only 0.6 kcalmol(-1). The rearrangement of s-trans 1 to 2 requires an initial conversion of s-trans 1 to the s-cis conformer, with a predicted deltaG++(220 K) of 1.8 kcalmol(-1). The transition structure for the ring-opening of s-trans 1 into s-trans 3 (deltaG++(220 K)=4.7 kcalmol(-1)) is more energetic than that for the ring-opening of s-cis 1 into s-cis 3 (deltaG++(220 K)=2.5 kcalmol(-2)) due to larger repulsive nonbonded H...H interactions in the former transition structure. On the basis of these results, it is suggested that if the reaction of 1,1-dibromo-2-vinylcyclopropane with methyllithium at -78 degrees C leads to the initial formation of carbene 1, then the reaction should yield 2 as the main product together with small amounts of 3. This theoretical prediction nicely agrees with experimental findings.     

Atomic spectroscopy for detection in thermal analysis

An atomic absorption spectrophotometer is coupled to a conventional thermoanalytical quartz furnace as used for TG and DTG to detect the thermally evolved products. In this combined system, the dry aerosol (smoke) obtained by cooling the vapour evolved is transported from the furnace to the flame for metal-specific atomic absorption detection. The particular design of the furnace outlet promotes the formation of stable aerosols. Optimum experimental conditions were determined, using zinc chloride solution, by varying the specimen mass, the heating rate and the flow rate of the furnace gas at a linear temperature program. The absorbancevs. temperature curves obtained with this method for various zinc compounds are compared with the corresponding DTG curves. The applicability of the technique for studying heterogeneous reactions with carbon tetrachloride and hexane vapours is presented. The utilization of an atomic absorption spectrophotometer equipped with a quartz cuvette for detecting the thermal evolution of mercury vapours is described, as well as detection potentials by molecular absorption (for NO and NH₃) and light scattering (for smoke evolved from organic matter). The results obtained with the suggested methods may, in some respects, valuably complement the results achieved with DTG and with flame ionization detection.

---

Zusammenfassung Ein Atomabsorptionsspektrometer wurde mit einem konventionellen thermoanalytischen Quarzofen gekoppelt um thermische Abspaltprodukte nachzuweisen. In diesem kombinierten System wird das durch Kühlung des entwickelten Dampfes erhaltene Aerosol (Rauch) vom Ofen in die Flamme für den metallspezifischen Atomabsorptionsnachweis übergeleitet. Die spezielle Ausbildung der Austrittsöffnung gewährleistet die Bildung eines stabilen Aerosols. Die optimalen Versuchsbedingungen wurden durch Zinkchloridlösungen bei Anderung der Probenmasse, der Aufheizgeschwindigkeit und der Strömungsgeschwindigkeit des Ofengases im linearen Temperaturprogramm ermittelt. Die mit dieser Methode für verschiedene Zinkverbindungen erhaltenen Absorptions—Temperatur-Kurven wurden mit den entsprechenden DTG-Kurven verglichen. Die Anwendbarkeit dieser Technik bei dem Studium heterogener Reaktionen mit Kohlenstofftetrachlorid und Hexandämpfen wird gezeigt. Der Einsatz eines mit einer Quarzküvette zum Nachweis der thermischen Entwicklung von Quecksilberdampf versehenen Atomabsorptionsspektrometers wird beschrieben, sowie die Nachweisgrenze durch molekulare Absorption (für NO und NH₃) und Lichtstreuung (für aus organischem Material entwickelten Rauch). Die bei den beschriebenen Methoden erhaltenen Ergebnisse können, in mancher Hinsicht, die durch DTG und Flammenionisationsnachweis erhaltenen Ergebnisse wertvoll ergänzen.

---

- , , . (), , . . , . — , , -. . - , , , ( NO NH₃) ( , ). , , , - .

---

---

Presented in part at the 24th Hungarian Conference on Analytical Sptecroscopy, Miskolc, June 15–18, 1981. Abstracts pp. 159–162.

---

The authors wish to express their thanks to S. Gál for his assistance in the present application of the temperature programmer developed by him and his group, and for the valuable discussions on the subject. Thanks are also due to K. Tomor and J. Kmives who participated in the comparative thermoanalytical measurements and their analysis.     

Dynamic,computer-assisted interpretation of infrared spectra of condensed-phase mixtures

A knowledge-based system, MIXIR, designed to assist researchers in interpreting the infrared spectra of condensed-phase mixtures is described. This system overcomes many of the inherent limitations of static-rule-based systems. An iterative problem-solving approach is permitted, making use of information gained during the interpretation process. The dynamic rule selection and significance evaluation alos allow the user to provide information on the sample matrix, or to select a subset of the compounds for rule derivation. The MIXIR system was evaluated with a knowledge base compiled using IRBASE, a complementary program, and a test set of 20 mixtures.     

Determination of gentamycin by synchronous derivative fluorimetry

Use of synchronous first-derivative fluorimetry for determination of gentamycin is described. Gentamycin reacts with acetylacetone and formaldehyde in pH 5.6 HOAc/NaOAc buffer solution to form N-gentamyl-2,6-dimethyl-3,5-diacethyl-1,4-dihydropyridine[I] which is a fluorescent substance. Spectra of [I] and the reagent blank can be separated with synchronous derivative fluorimetry, and gentamycin can be determined directly. The synchronous spectral peaks of [I] and the reagent blank are at 434 and 411 nm, respectively. The first-derivative peak of [I] is at 425 nm. Effects of pH, foreign ions, buffer system, and heating time on the determination of gentamycin have been examined. The linear regression equation of the calibration graph is C=0.0513H-0.0416, with a correlation coefficient of linear regression of 0.9978. C means total potency of gentamycin: U ml(-1); H means peak height in the linear regression equation calibration graph. The linear range for the determination of gentamycin is from 0.00 to 3.00 U ml(-1). Recovery is from 95.06 to 112.0%, R.S.D. of 3.8%. The results determined by the fluorimetric method agreed roughly with those by the microbiological method. The method is simple and has low detection limit.     

Cloud-point preconcentration of fulvic and humic acids

The cloud-point extraction technique was used for preconcentration of fulvic and humic acids. The effect of the acidity of solution, the equilibration temperature and time, the amount of added surfactant (Triton X-100) and the time of centrifugation on the recovery were examined. The recoveries of fulvic and humic acids achieved under optimised conditions were 82% and 96%, respectively.     

Benzindoles. 23. 2-formyl- and 3-formyl-4,5-benzindoles

It is shown that, in addition to the usually formed 3-formyl-4,5-benzindole, 2-formyl-4,5-benzindole can be obtained via the Vilsmeier reaction. The IR, PMR, and UV spectra of the 2- and 3-formyl isomers are compared, and their possible conformations are discussed.See [1] for Communication 22.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 343–345, March, 1984.