Thermoresponsive N,N-dialkylacrylamide copolymer blends as DNA sieving matrices with a thermally tunable mesh size

In an earlier study we showed that a blend of thermoresponsive and nonthermoresponsive hydroxyalkylcelluloses could be used to create a thermally tunable polymer network for double-stranded (ds) DNA separation. Here, we show the generality of this approach using a family of polymers suited to a wider range of DNA separations: a blended mixture of N,N-dialkylacrylamide copolymers with different thermoresponsive behaviors. A mixture of 47% w/w N,N-diethylacrylamide (DEA)/53% w/w N,N-dimethylacrylamide (DMA) (DEA47; thermoresponsive, transition temperature = 55 degrees C in water) and 30% w/w DEA/70% w/w DMA (DEA30; nonthermoresponsive, transition temperature > 85 degrees C in water) copolymers in the ratio of 1:5 w/w DEA47:DEA30 was used to separate a dsDNA restriction digest (PhiX174-HaeIII). We investigated the effects of changing mesh size on dsDNA separation, as controlled by temperature. We observed good DNA separation performance with the copolymer blend at temperatures ranging from 25 degrees C to 48 degrees C. The separation selectivity was evaluated quantitatively for certain DNA fragment pairs as a function of temperature. The results were compared with those obtained with a control matrix consisting only of the nonthermoresponsive DEA30. Different DNA fragment pairs of various sizes show distinct temperature-dependent selectivities. Over the same temperature range, no significant temperature dependence of selectivity is observed for these DNA fragment pairs in the nonthermoresponsive control matrix. Overall, the results show similar trends in the temperature dependency of separation selectivity to what was previously observed in hydroxyalkylcellulose blends, for the same DNA fragment pairs. Finally, we showed that a ramped temperature scheme enables improved separation in the blended copolymer matrix for both small and large DNA fragments, simultaneously in a single capillary electrophoresis (CE) run.     

1H and 199Hg NMR spectra of methylmercury(II) complexes. Effects of basicity and ortho substitution in pyridines(L) in complexes [MeHgL]NO3

Linear complexes [MeHgL]NO₃ (L = substituted pyridine) have been prepared and their ¹H and ¹⁹⁹Hg NMR spectra measured and compared with other complexes of this series reported previously. The coupling constant J(¹H?¹⁹⁹Hg) correlates directly with pKa and with the gas phase enthalpy of ionization [ΔG_i(g)] of LH⁺; with J(¹H?¹⁹⁹Hg) decreasing with increasing pKa or ΔG_i(g). The chemical shift, δ, for ¹⁹⁹Hg does not correlate with either pKa or ΔG_i(g). Complexes without substituents in the 2 position of pyridine have δ¹⁹⁹Hg ca. 80–100 ppm downfield from MeHgNO₃, those with one methyl group in the 2 position ca. 125–150 ppm, and those with methyl groups in the 2 and 6 position (or benzyl or 3′-methylpyridyl groups in the 2 position) ca. 160–200 ppm downfield from MeHgNO₃. The coupling constant J(¹H?¹⁹⁹Hg) is found to be more useful than δ¹⁹⁹Hg in determination of solution structures of MeHg(II) complexes of this type of ligand.     

Photophysics and redox behavior of chiral transition metal polymers

The absorption and emission spectra, excited-state lifetimes, quantum yields, and electrochemical measurements have been obtained for a new series of chiral complexes based on three different chiral 2,2':6',2' '-terpyridine ligands, (-)-ctpy, (-)-[ctpy-x-ctpy], and (-)-[ctpy-b-ctpy], with one, two, or multiple Ru metal centers. The room-temperature absorption and emission maxima of [[((-)-ctpy)Ru]-(-)-[ctpy-b-ctpy]-[Ru((-)-ctpy)]](PF(6))(4) and ((-)-[ctpy-b-ctpy])-[[Ru((-)-[ctpy-b-ctpy])](PF(6))(2)](n) were shifted to lower energies and also exhibited significantly longer luminescence lifetimes when compared to [Ru((-)-ctpy)(2)](PF(6))(2), [[((-)-ctpy)Ru]-(-)-[ctpy-x-ctpy]-[Ru((-)-ctpy)]](PF(6))(4), and ((-)-[ctpy-x-ctpy])-[[Ru((-)-[ctpy-x-ctpy])](PF(6))(2)](n). In terms of their electrochemical behavior, all of the complexes studied exhibited one Ru-centered and two ligand-centered redox waves and the [[((-)-ctpy)Ru]-(-)-[ctpy-x-ctpy]-[Ru((-)-ctpy)]](PF(6))(4), ((-)-[ctpy-x-ctpy])-[[Ru((-)-[ctpy-x-ctpy])](PF(6))(2)](n), and ((-)-[ctpy-b-ctpy])-[[Ru((-)-[ctpy-b-ctpy])](PF(6))(2)](n)() complexes were found to electrodeposit upon ligand-based reduction. The difference between the formal potentials of the Ru-centered and the first ligand-centered (least negative) waves corresponded linearly with the changes in the observed emission energies. The shifts in energy are discussed using a particle-in-a-box model, and the luminescence lifetimes are discussed in terms of the structure of the excited-state manifold.     

Detection of Escherichia coli O157:H7 bacteria by a combination of immunofluorescent staining and capillary electrophoresis

As the number of incidents of bacterial infections continues to rise around the globe, simpler, faster, and more sensitive diagnostic techniques are required to improve the safety of the food supply and to screen for potential bacterial infections in humans. We present here direct and indirect approaches for the detection of bacteria, which are based upon a combination of immunofluorescent staining and capillary electrophoresis. In the direct approach, Escherichia coli O157:H7 bacteria stained with fluorescein-tagged specific antibodies are detected by CE, while in the indirect approach fluorescein-tagged specific antibodies to E. coli are first captured by E. coli O157:H7 bacteria and then released and detected by CE. We have identified suitable bacteria staining and CE protocols, which involved a 10 mM Tris-borate-EDTA (TBE) buffer, 0.25 micro g antibody/1 million bacteria, and capillaries dynamically coated with poly-N-hydroxyethylacrylamide (polyDuramide). We have also successfully detected the presence of E. coli O157:H7 in contaminated meat. The total time required for analysis was 6-8 h, which is less than that realized in most commercial assays presently available.     

A new perspective on beta-sheet structures using vibrational Raman optical activity: from poly(L-lysine) to the prion protein

The vibrational Raman optical activity (ROA) spectrum of a polypeptide in a model beta-sheet conformation, that of poly(l-lysine), was measured for the first time, and the alpha-helix --> beta-sheet transition monitored as a function of temperature in H(2)O and D(2)O. Although no significant population of a disordered backbone state was detected at intermediate temperatures, some side chain bands not present in either the alpha-helix or beta-sheet state were observed. The observation of ROA bands in the extended amide III region assigned to beta-turns suggests that, under our experimental conditions, beta-sheet poly(L-lysine) contains up-and-down antiparallel beta-sheets based on the hairpin motif. The ROA spectrum of beta-sheet poly(L-lysine) was compared with ROA data on a number of native proteins containing different types of beta-sheet. Amide I and amide II ROA band patterns observed in beta-sheet poly(L-lysine) are different from those observed in typical beta-sheet proteins and may be characteristic of an extended flat multistranded beta-sheet, which is unlike the more irregular and twisted beta-sheet found in most proteins. However, a reduced isoform of the truncated ovine prion protein PrP(94-233) that is rich in beta-sheet shows amide I and amide II ROA bands similar to those of beta-sheet poly(L-lysine), which suggests that the C-terminal domain of the prion protein is able to support unusually flat beta-sheets. A principal component analysis (PCA) that identifies protein structural types from ROA band patterns provides a useful representation of the structural relationships among the polypeptide and protein states considered in the study.     

Poly-N-hydroxyethylacrylamide as a novel, adsorbed coating for protein separation by capillary electrophoresis.

We present the polymer poly-N-hydroxyethylacrylamide (PHEA) (polyDuramide) as a novel, hydrophilic, adsorbed capillary coating for electrophoretic protein analysis. Preparation of the PHEA coating requires a simple and fast (30 min) protocol that can be easily automated in capillary electrophoresis instruments. Over the pH range of 3-8.4, the PHEA coating is shown to reduce electroosmotic flow (EOF) by about 2 orders of magnitude compared to the bare silica capillary. In a systematic comparative study, the adsorbed PHEA coating exhibited minimal interactions with both acidic and basic proteins, providing efficient protein separations with excellent reproducibility on par with a covalent polyacrylamide coating. Hydrophobic interactions between proteins and a relatively hydrophobic poly-N,N-dimethylacrylamide (PDMA) adsorbed coating, on the other hand, adversely affected separation reproducibility and efficiency. Under both acidic and basic buffer conditions, the adsorbed PHEA coating produced an EOF suppression performance comparable to that of covalent polyacrylamide coating and superior to that of adsorbed PDMA coating. The protein separation performance in PHEA-coated capillaries was retained for 275 consecutive protein separation runs at pH 8.4, and for more than 800 runs at pH 4.4. The unique and novel combination of hydrophilicity and adsorptive coating ability of PHEA makes it a suitable wall coating for automated microscale analysis of proteins by capillary array systems.     

A study of alpha-helix hydration in polypeptides, proteins, and viruses using vibrational raman optical activity

A vibrational Raman optical activity (ROA) study, supplemented by protein X-ray crystal structure data, of alpha-helices in polypeptides, proteins, and viruses has suggested that ROA bands in the extended amide III spectral region may be used to distinguish between two types of right-handed alpha-helix. One type, associated with a positive ROA band at approximately 1300 cm(-1), dominates in hydrophobic environments and appears to be unhydrated; the other, associated with a positive ROA band at approximately 1340 cm(-1), dominates in hydrophilic environments and appears to be hydrated. Evidence is presented to support the hypothesis that unhydrated alpha-helix corresponds to the canonical conformation alpha(c) and hydrated alpha-helix to a more open conformation alpha(o) stabilized by hydrogen bonding of a water molecule or a hydrophilic side chain to the peptide carbonyl. Alpha-helical poly(L-lysine) and poly(L-ornithine) in aqueous solution and poly(L-alanine) in dichloracetic acid display both bands, but alpha-helical poly(l-glutamic acid) in aqueous solution and poly(gamma-benzyl L-glutamate) in CHCl(3) display only the approximately 1340 cm(-1) band and so may exist purely as alpha(o) due to enhanced stabilization of this conformation by particular side chain characteristics. The ROA spectrum of poly(beta-benzyl L-aspartate) in CHCl(3) reveals that it exists in a single left-handed alpha-helical state more analogous to alpha(o) than to alpha(c).     

Rayleigh and Raman scattering from optically active molecules

The intensity of Rayleigh and Raman scattering from optically active molecules is shown to be slightly different in right and left circularly polarized incident light. The circular intensity differential of the Rayleigh line is dependent on components of the optical activity tensor, and that of the Raman lines is a function of the variation of the optical activity with the vibrational coordinates. This circular intensity differential might be of the order of 10^-3 times that of the Rayleigh or Raman intensity.     

Evaluation of stage acoustics in Seoul Arts Center Concert Hall by measuring stage support

Stage acoustics is an important characteristic for concert halls, both for the acoustic quality on stage and for the audience. However, relatively little research has been conducted into the question. This study was based on the investigation of an actual concert hall stage, that of the Seoul Arts Center Concert Hall in Korea. The stage acoustics was evaluated in the actual hall, and with two models: a 1:25 scale model and a computer model. The study was based on the stage support parameter ST1 proposed by Gade as a measure of support for individual performers [Acustica 65, 193-203 (1989)]. The variation of support was measured on the empty stage of the actual hall and in the two models. The effect of musicians on stage, the effect of moving the orchestra, the effect of ceiling height and of stage-wall profile were also investigated. Conclusions are drawn both relating to the Seoul Concert Hall stage and stages in general.