Electroreductive polymerization of trans-[RuCl 2(vpy) 4] on Nd-Fe-B magnets: electrochemical impedance spectroscopy interpretation, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analysis

The electropolymerization of trans-[RuCl₂(vpy)₄] (vpy=4-vinylpyridine) monomer on Nd-Fe-B magnets was studied by electrochemical impedance spectroscopy (EIS). Impedance diagrams obtained during the polymerization process were used to monitor film formation. The EIS results gave insight into the electrochemical phenomena occurring at the magnet surface as the polymerization process progressed. The film structure and morphology were also studied by X-ray photoelectron spectroscopy, scanning electron microscopy and Raman spectroscopy. The Raman spectroscopy results showed that the polymerization takes place at the vinyl groups of the monomer and also that the redox polymer structure is very similar to that of the monomer. The ratio of the intensity of the XPS peaks for fluorine (from the electrolyte PF₆ ^–) and ruthenium present in the film showed that the polymer on Nd-Fe-B contained an equal proportion of Ru²⁺ and Ru³⁺, indicating that part of the film is positively charged, i.e. {[RuCl₂(vpy)₄]⁺} _n .     

Metal-directed synthesis and photophysical studies of trinuclear v-shaped and pentanuclear x-shaped ruthenium and osmium metallorods and metallostars based upon 4'-(3,5-dihydroxyphenyl)-2,2':6',2''-terpyridine divergent units

A new series of V-shaped trinuclear metallorods and X-shaped pentanuclear metallostars has been prepared by the reaction of metal complexes bearing pendant phenolic functionalities with complexes containing electrophilic ligands. Specifically, {M(tpy)2} motifs (M=Ru or Os; tpy=2,2':6',2'-terpyridine) bearing one or two pendant 3,5-dihydroxyphenyl substituents at the 4-position of the central ring of the tpy have been reacted with the complexes [Ru(tpy)(Xtpy)]2+ (X=Cl or Br) to form new ether-linked species. The energy transfer from ruthenium to osmium in these complexes has been investigated in detail and the efficiency of transfer shown to be highly temperature dependent; the energy transfer is highly efficient at low temperature, whereas at room temperature nonradiative and nontransfer deactivation of the excited {Ru(tpy)2}* domains is most significant.     

‘Weak links’ in polystyrene

A first step in the thermal degradation of polystyrene prepared by radical polymerisation has been isolated by heating the polymer in the temperature range 199–280°C. In this step a chain scission process occurs without formation of volatile products, involving, on average, about one bond between structural units in every 10 000. This gives more direct evidence than hitherto of the presence of ‘weak links’ in polystyrene which are shown to be randomly distributed in the polymer chains, their scission resulting in a single break in the molecule of polystyrene to which they belong.The very low energy of activation for chain scission suggests that more than one rate determining step is involved in the process.     

Phenol O–H bond dissociation energy in water clusters

We are reporting ab initio and density functional theory (DFT) calculations for the phenol O–H bond dissociation energy in the gas phase and in phenol–water clusters. We have tested a series of recently proposed functionals and verified that DFT systematically underestimates the O–H bond dissociation energy of phenol. However, O–H bond dissociation energies in water clusters are in reasonable agreement with experimental data for phenol in solution. We have evaluated electronic difference densities in phenol–water, phenoxy–water, and water, and we are suggesting that the representation of this quantity gives an interesting picture of the electronic density rearrangement induced by hydrogen bond interactions in phenol–water clusters. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Analysis of the essential oil from aerial parts of Eupatorium cannabinum subsp. corsicum (L.) by gas chromatography with electron impact and chemical ionization mass spectrometry

Eupatorium cannabinum subsp. corsicum (L.), an aromatic plant, is an endemic subspecies from Corsica. The essential oil from aerial parts of E. cannabinum subsp. corsicum was studied by GC, GC/MS and 13C NMR. One hundred and forty-seven components were identified representing 93.6% of the total amount. The main constituents are germacrene D (28.5%), alpha-phellandrene (19.0%) and para-cymene (5.2%). A particularity of this essential oil is the presence of monoterpene esters derived from nerol, lavandulol, borneol, thymol and 8,9-dehydrothymol. These compounds have been investigated using GC/MS in different ionization modes like electron impact (EI), positive chemical ionization (PCI) and negative chemical ionization (NCI).     

Crystal structures and magnetic properties of two low-dimensional materials constructed from [Mn(III)(salen)H2O]+ and [M(CN)8](3-/4-) (M = Mo or W) precursors

The syntheses, X-ray structures, and magnetic behaviors of two new cyano-bridged assemblies, the molecular [Mn(III)(salen)H2O]3[W(V)(CN)8].H2O (1) and one-dimensional [Mn(salen)(H2O)2]2[[Mn(salen)(H2O)][Mn(salen)]2[Mo(CN)(8)]].0.5ClO4.0.5OH.4.5H2O (2), are presented. Compound 1 crystallizes in the monoclinic system, has space group P2(1)/c, and has unit cell constants a = 13.7210(2) A, b = 20.6840(4) A, c = 20.6370(2) A, and Z = 4. Compound 2 crystallizes in the triclinic system, has space group P, and has unit cell dimensions a = 18.428(4) A, b = 18.521(3) A, c = 18.567(4) A, and Z = 2. The structure of 1 consists of the asymmetric V-shaped Mn-NC-W-NC-Mn-O(phenolate)-Mn molecules, where W(V) coordinates with [Mn(salen)H2O] and singly phenolate-bridged [Mn(salen)H2O]2 moieties through the neighboring cyano bridges. The [W(V)(CN)8]3- ion displays distorted square-antiprism geometry. The structure of 2 consists of the cyano-bridged [Mn3(III)Mo(IV)]n- repeating units linked by double phenolate bridges into one-dimensional zigzag chains. The Mn(III) centers are bound to Mo(IV) of square-antiprism geometry through the neighboring cyano bridges. The magnetic studies of 1 reveal the antiferromagnetic intramolecular interactions through the CN and phenolate bridges and the relatively weak intermolecular interactions. Compound 1 becomes antiferromagnetically ordered below TN = 4.6 K. The presence of the magnetic anisotropy is documented with the MH measurements carried out for both polycrystalline and single-crystal samples. At T = 1.9 K, the spin-flop transition is observed in the field of 18 kOe applied parallel to the bc plane, which is the easy plane of magnetization. Field dependence of magnetization of 1 shows field-induced metamagnetic behavior from the antiferromagnetic ground state of ST = 3/2 to the state of ST = 5/2. The magnetic properties of 2 indicate a weak antiferromagnetic interaction between Mn(III) centers in double-phenolate-bridged [Mn(III)(salen)]2 dinuclear subunits and a very weak ferromagnetic interaction between them through the diamagnetic [Mo(IV)(CN)8]4- spacer.     

Differential binding of Mg2+, Zn2+, and Cd2+ at two sites in a hammerhead ribozyme motif, determined by 15N NMR

A decamer duplex model of Domain II of the hammerhead ribozyme was synthesized with [8-13C-1,7,NH2-15N3]-guanosine at the known metal binding site, G10.1 and, for comparison, [2-13C-1,7,NH2-15N3]-guanosine at G16.2. The 15N NMR chemical shifts of the labeled N7s monitored during addition of Mg2+, Cd2+, and Zn2+ showed the same preference for binding at G10.1 over G16.2 for each metal. These results demonstrate that 15N labeling can be used to evaluate the binding of different metals, including Mg2+, to a given nitrogen, as well as to compare the binding potential of different sites.     

Use of modified rice husks as a natural solid adsorbent of trace metals: characterisation and development of an on-line preconcentration system for cadmium and lead determination by FAAS

The use of rice husks as an alternative adsorbent in an on-line preconcentration system for Cd (II) and Pb (II) determination by flame atomic absorption spectrometry (FAAS) is described. The potential of rice husks as a natural adsorbent was evaluated as a material modified with 0.75 mol l⁻¹ NaOH solution and in the unmodified form. For this task, several techniques such as spectroscopy and thermogravimetry were used for elucidation of possible functional groups responsible for the uptake of Cd (II) and Pb (II). Furthermore, based on adsorption studies and adsorption isotherms applied to the Langmüir model, it was possible to verify that modified rice husks present a higher adsorption capacity for both metals. After establishing this material as a promising natural adsorbent, it was used for on-line preconcentration of Cd (II) and Pb (II) metals. The multivariate optimisation of chemical and flow variables was performed by using a full factorial design (2⁴) including the following factors: preconcentration time, preconcentration flow rate, concentration and volume of eluent. The optimum pH values used for on-line preconcentration were taken from prior univariate experiments. Under optimised conditions for Cd (II) determination (4 min of preconcentration at a 6 ml min⁻¹ preconcentration flow rate, in which comprises 24 ml of preconcentration volume, 200 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent), the system achieved a detection limit of 1.14 μg l⁻¹ and an enrichment factor of 72.4. Similar conditions were used for Pb (II) determination (4 min of preconcentration, 6 ml min⁻¹ preconcentration flow rate, 300 μl elution volume and 1.0 mol l⁻¹ HNO₃ solution as eluent) from which a detection limit of 14.1 μg l⁻¹ and enrichment factor of 46.0 were achieved. Also, rice husks have been shown to be a homogeneous and stable adsorbent in which more than 100 preconcentration/elution cycles provide a relative standard deviation (RSD) of less than 6.0% on the analytical signal. The satisfactory accuracy of the method developed was obtained by using spiked water samples (mineral water and lake water) and spiked red wine samples. These values were confirmed by electrothermal atomic absorption spectrometry (ETAAS). The certified reference material [pig kidney (CRM 186)] and the reference material [beech leaves (CRM 100)] were also used.     

3M Petrifilm Staph Express Count plate method for the enumeration of Staphylococcus aureus in selected types of meat, seafood, and poultry: collaborative study

The 3M Petrifilm Staph Express Count plate method was compared with AOAC Official Method 975.55 for the enumeration of Staphylococcus aureus in selected foods. Four foods--cooked, diced chicken; cured ham; smoked salmon; and pepperoni--were analyzed for S. aureus by 12 collaborating laboratories. For each food tested, the collaborators received 8 blind test samples consisting of a control sample, a low inoculation level, a medium inoculation level, and a medium inoculation level with background flora, each in duplicate. The mean log10 counts for the methods were comparable for all 4 foods. The repeatability and reproducibility variances of the 24 h Petrifilm Staph Express Count plate method were similar to those of the 72 h standard method.     

Long-range dispersion coefficients for like centrosymmetric linear molecules and an application to H2-H2

The real spherical tensor theory of long-range intermolecular coefficients developed in previous papers is applied to derive explicit formulae for the first three dispersion coefficients for like centrosymmetric linear molecules. The expansion of angle-dependent coefficients in associated Legendre polynomials allows one to identify the isotropic and anisotropic components of the dispersion interaction in terms of London dispersion constants, the treatment of higher coefficients being simplified by the coupling of the elementary (l, l′)-polarizations to resultant angular momenta L_A and L_B onto each molecule. The contributions from all coupling schemes are given explicitly for C₆, C₈, C₁₀, and numerical results are presented for H₂-H₂ using two-term reduced spectra values from the Kaiserlautern group.