Filtration characteristics of granular bed with layered drawers for removing dust from gas streams

Filtration tests were conducted on a granular bed filter with layered drawers filled with corundum particles with sizes between either 1 mm and 1.5 mm or 2 mm and 3 mm or with quartz sand particles with sizes between 0.125 mm and 1.5 mm.Filtration velocity,filter particle thickness,and filter particle size were all found to influence the filtration efficiency and the pressure drop of both the fixed granular bed and the layered-drawer granular bed.Granular strata with different thickness ratios also strongly influenced the filtration efficiency and pressure drop.For a granular bed with two sizes of filter particles,the coarse granules in the upper layer capture dust with large particle sizes,while the fine granules in the lower layer capture dust with smaller particle sizes that passes through the filter cake and upper layer.Optimal operating conditions were determined at which the filtration efficiency was found to be 99.42%with a bed pressure drop of 320 Pa.     

A nonlinear finite element model for the stress analysis of soft solids with a growing mass

The paper presents a new finite element (FE) model for the stress analysis of soft solids with a growing mass based on the work of Lubarda and Hoger (2002). Contrary to the traditional numerical methods emphasizing on the influence of growth on constitutive equations, an equivalent body force is firstly detected, which is resulted from the linearization of the nonlinear equation and acts as the driver for material growth in the numerical aspect. In the algorithm, only minor correction on the traditional tangent modulus is needed to take the growth effects into consideration and its objectivity could be guaranteed comparing with the traditional method. To solve the resulted equation in time domain, both explicit and implicit integration algorithms are developed, where the growth tensor is updated as an internal variable of Gauss point. The explicit updating scheme shows higher efficiency, while the implicit one seems to be more robust and accurate. The algorithm validation and its good performance are demonstrated by several two-dimensional examples, including free growth, constrained growth and stress dependent growth.     

钝圆柱头质量对简支梁的弹性次碰撞研究

该文采用赫兹碰撞理论、三维动力有限元方法和自行研制的次碰撞实验装置,研究了钝圆柱头质量一次坠落碰撞简支钢梁过程的次碰撞现象、次碰撞过程的持续时间和次碰撞发生的条件.实验测试和数值模拟均清楚地观察到了复杂的次碰撞现象.研究结果表明:(1)当梁初始处于静止状态时,将实验测试和数值模拟结果与理论分析结果对比后发现,首个次碰撞过程由局部接触变形主导,并可以采用Hertz弹性碰撞理论来描述;(2)实验和数值模拟结果展现了与首个次碰撞过程特征迥异的后续次碰撞过程,后续次碰撞过程的持续时间出现大范围的随机变化;(3)进一步分析发现,后续次碰撞过程由局部接触变形和梁的整体变形运动共同主导,梁的整体变形运动使得碰撞力响应变得异常复杂;(4)通过数值计算结果发现,当出现次碰撞现象时,碰撞位移响应中的一阶模态幅值占比会突然降低,相位角发生明显的变化;(5)数值计算结果表明,次碰撞发生的条件与质量比、碰撞初速度、碰撞动量、碰撞位置、测试梁长度和厚度等有关;(6)次碰撞发生的条件若用质量比来度量,则发现存在一个质量比阀值.上述研究表明,局部接触变形和梁的整体变形运动相互作用,产生了复杂的耦合效应,使得次碰撞现象呈现了丰富的力学行为.因此,进一步通过理论、实验和数值仿真研究复杂的次碰撞现象,对于深入理解柔性结构的碰撞行为很有必要.     

考虑剪切变形的复合材料多层板壳加权残数解

本文在文献[1]的基础上,将加权残数法用于复合材料多层板壳分析,并推导出相应的关系式。文中给出了算例,并与解析解进行了比较,结果表明,本文方法精度较高,用于复合材料多层板壳分析是有效的。     

Electro-osmotic pore pressures in soil due to an alternating electrical field

Pore pressure development in a soil specimen due to electro-osmosis under alternating current conditions is examined theoretically. Solutions to the governing equation are derived for one-dimensional flow with boundary conditions corresponding to an impervious (conventional no-flow boundary), a partially drained boundary, and a partially drained boundary with an intervening permeable zone between the boundary and the soil. These latter two boundary conditions can arise from details of pore pressure measuring systems at the specimen boundaries during laboratory experiments. An analysis of the solutions indicates that for a perfect no-flow boundary, excess pore pressures measured at an electrode consist of a steady state and rapidly-decaying transient response. The pore pressures exhibit a 45 degree phase shift relative to the applied electric current. The effect of the partially drained boundary is to reduce the peak to peak amplitude of the pore pressure and to increase the phase shift to as much as 90 degrees depending on the compressibility of the pore pressure measuring system. The effect of the impeded and partially drained boundary is to further reduce the amplitude of the pore pressures and to increase the phase shift to as much as 180 degrees depending on the relative permeability of the impeded boundary.     

地质工程计算机辅助设计支持系统及其应用

地质工程设计具有非结构化、非参数化、非规范化特征,同时,也具有“风险与优化”性和“反馈与可变更”性。仅用一种固定的、程式化的求解方法是不现实的。因此,必须寻求一种非结构化的工具,根据问题的需要,面向目标自动生成求解结构。本文归纳了地质工程设计的基本内容,探讨了基于几何和基于人工智能的计算机辅助地质工程设计。最后,介绍了地质工程设计支持系统在长江三峡链子崖危岩治理工程设计中的应用。     

Experimental studies on affinity chromatography in an electric field.

A multicompartment electrolyzer, which has been used for preparative electrophoresis [Z. Liu, Z. Huang, J.-Y. Cong, et al., Sep. Sci. Technol. 31 (1996) 427], is applied for carrying out affinity chromatography in an alternating electric field. The effect of electric field strength on the adsorption and desorption characteristics is experimentally examined with human serum albumin and Blue Sepharose Fast Flow as a model system. It is shown that the existence of an electric field leads to a significant change in the adsorption capacity of the blue dye, which may be used for establishing a preferential adsorption to achieve a high resolution. The adsorption speed increases slightly with respect to the increase of electric field strength, while adsorption capacity in the presence of an electric field is independent of the electric field strength. Different elution behavior is observed as function of adsorption condition and a high recovery of the adsorbed protein is obtained when the adsorption is carried out in the presence of an electric field.     

The Syntheses of Triazinone and Pyrimidinone Biphenyltetrazoles as Angiotensin II Receptor Antagonists

A series of biphenylyltetrazole substituted triazinones and structure-related pyrimidinones are systhesized, and their binding affinities for angiotensin II receptor are reported.     

输电线路等效电阻的计算

本文通过对趋肤效应的分析 ,讨论了输电线路中的焦耳热 ,并给出其等效电阻的计算结果     

Effect of the Si/Ce molar ratio on the textural properties of rare earth element cerium incorporated mesoporous molecular sieves obtained room temperature

Rare earth Ce-incorporated MCM-41 mesoporous molecular sieves (CeMCM-41) were synthesized via a direct and nonhydrothermal method at room temperature from sodium silicate and ammonium cerium (IV) nitrate as raw materials. Cetyltrimethyl ammonium bromide (CTAB) was used as a template. The resultant samples were characterized by means of powder X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), diffuse reflectance ultraviolet–visible spectroscopy (UV–vis) and N₂ physical adsorption, respectively. The effect of the Si/Ce molar ratio on the crystalline structure and textural properties of CeMCM-41 was also investigated. The experimental results show that ordered CeMCM-41 mesoporous molecular sieves were successfully synthesized at room temperature and the resultant mesoporous materials have specific surface areas in the range of 594–1369 m²/g and average pore sizes in the range of ca. 2.5–2.8 nm. It has been found that the structural properties are strongly related to the amounts of cerium incorporation. When the cerium content increased in the samples, the intensity of the peak (1 0 0) was gradually reduced, and the surface area and structural regularity were diminished.