Rapid determination of 226Ra in drinking water samples using dispersive liquid-liquid microextraction coupled with liquid scintillation counting

A new radioanalytical method was developed for rapid determination of ²²⁶Ra in drinking water samples. The method is based on extraction and preconcentration of ²²⁶Ra from a water sample to an organic solvent using a dispersive liquid-liquid microextraction (DLLME) technique followed by radiometric measurement using liquid scintillation counting. In DLLME for ²²⁶Ra, a mixture of an organic extractant (toluene doped with dibenzo-21-crown-7 and 2-theonyltrifluoroacetone) and a disperser solvent (acetonitrile) is rapidly injected into the water sample resulting in the formation of an emulsion. Within the emulsion, ²²⁶Ra reacts with dibenzo-21-crown-7 and 2-theonyltrifluoroacetone and partitions into the fine droplets of toluene. The water/toluene phases were separated by addition of acetonitrile as a de-emulsifier solvent. The toluene phase containing ²²⁶Ra was then measured by liquid scintillation counting. Several parameters were studied to optimize the extraction efficiency of ²²⁶Ra, including water immiscible organic solvent, disperser and de-emulsifier solvent type and their volume, chelating ligands for ²²⁶Ra and their concentrations, inorganic salt additive and its concentration, and equilibrium pH. With the optimized DLLME conditions, the accuracy (expressed as relative bias, B _r ) and method repeatability (expressed as relative precision, S _B ) were determined by spiking ²²⁶Ra at the maximum acceptable concentration level (0.5 Bq L⁻¹) according to the Guidelines for Canadian Drinking Water Quality. Accuracy and repeatability were found to be less than −5% (B _r ) and less than 6% (S _B ), respectively, for both tap water and bottled natural spring water samples. The minimum detectable activity and sample turnaround time for determination of ²²⁶Ra was 33 mBq L⁻¹ and less than 3 h, respectively. The DLLME technique is selective for extraction of ²²⁶Ra from its decay progenies.     

RNA-sensitive N-isopropylacrylamide/vinylphenylboronic acid random copolymer

Random copolymers of N-isopropylacrylamide (NIPA) and 4-vinylphenylboronic acid (VPBA) were obtained by solution polymerization using 2,2′-azobisizobutyronitrile as the initiator in ethanol at 65 °C. NIPA-co-VPBA copolymer exhibited both temperature- and pH-sensitivity. Thermally reversible phase transitions were observed both in the acidic and alkaline pH region for the copolymers produced with different VPBA/NIPA feed ratios. The pH dependency of the lower critical solution temperature (LCST) was stronger for the copolymers produced with higher VPBA feed concentrations. RNA was selected as a model biomolecule having vicinal-diol and amino groups that were potentially reactive with the boronic acid groups of NIPA-co-VPBA copolymer. The effect of RNA concentration on the LCST of NIPA-co-VPBA copolymer was investigated in aqueous media at different pHs. Although no significant effect was observed at pH 4, 7 or 10.5, the LCST decreased linearly with increasing RNA concentration at a pH approximately equal to the pK_a of boronic acid. This behavior was explained by considering the binding of RNA onto the copolymer chains to occur via two types of complex formation. For the formation of these complexes, the amino and vicinal-diol groups of RNA should react with the boronic acid groups of the copolymer in the tetrahedral anionic form. The results indicated that NIPA-co-VPBA copolymer could be utilized as a new reagent for the determination of RNA concentration in aqueous media. The proposed method was valid for the RNA concentration range of 0–4 g · mL⁻¹.

The schematical representation of the possible interactions between NIPA-co-VPBA copolymer and RNA. (A) A typical structure of single-stranded RNA. (B) Tetrahedral anionic form of boronic acid groups. (C) The interaction between the amino groups of the unpaired bases of RNA and the boronic acid groups of the copolymer. (D) Cyclic borate ester formation by the interaction between vicinal diol groups located at the 3′-end of RNA and boronic acid groups of the copolymer.     

Label-free detection of proteins from dried-suspended droplets using surface enhanced Raman scattering

A simple sample preparation method to obtain rich and reproducible surface-enhanced Raman scattering (SERS) spectra from proteins regardless of their surface properties and dimensions for label-free detection and identification is reported. The method uses colloidal silver nanoparticles (AgNPs) as substrates and is based on suspending the droplet of a mixture containing AgNPs and proteins from a hydrophobic surface. Drying the droplet at this suspended configuration allows the accumulation and packing of AgNPs and protein molecules in the middle of the droplet area rather than getting jammed at the edges of drying droplets as the solvent evaporates. A detection limit of down to 0.05 μg mL(-1) for some of the model proteins used in this study is obtained with this simple approach. The advantage of this method is its simplicity and improved sensitivity over other approaches reported in the literature.     

Generalizations of Lifting Modules

The notion of -supplemented modules is a proper generalization of lifting modules. As a proper generalization of -supplemented modules, we introduce (D ₁₂)-modules and obtain some properties, characterizations and decompositions of -supplemented modules and (D ₁₂)-modules.     

A note on strong β-I-sets and strongly β-I-continuous functions

Summary In [6], we introduced and investigated the notions of strong β-I-open sets and strong β-I-continuous functions in ideal topological spaces. In this paper, we investigate further their important properties.     

Idealization of a decomposition theorem

In 1986, Tong [13] proved that a function f : (X,τ)→(Y,φ) is continuous if and only if it is α-continuous and A-continuous. We extend this decomposition of continuity in terms of ideals. First, we introduce the notions of regular-I-closed sets, A _I-sets and A _I -continuous functions in ideal topological spaces and investigate their properties. Then, we show that a function f : (X,τ,I)→(Y, φ) is continuous if and only if it is α-I-continuous and A _I-continuous. This revised version was published online in June 2006 with corrections to the Cover Date.     

On dual of square free modules

A module M is said to be square free if whenever its submodule is isomorphic to N² = N⊕N for some module N, then N = 0. Dually, a module M is said to be d-square free (dual square free) if whenever its factor module is isomorphic to N² for some module N, then N = 0. In this paper, we give some fundamental properties of d-square free modules and study rings whose d-square free modules are closed under submodules or essential extensions.     

On Fully Idempotent Modules

A submodule N of a module M is idempotent if N = Hom(M, N)N. The module M is fully idempotent if every submodule of M is idempotent. We prove that over a commutative ring, cyclic idempotent submodules of any module are direct summands. Counterexamples are given to show that this result is not true in general. It is shown that over commutative Noetherian rings, the fully idempotent modules are precisely the semisimple modules. We also show that the commutative rings over which every module is fully idempotent are exactly the semisimple rings. Idempotent submodules of free modules are characterized.     

Dynamic magnetic hysteresis behavior and dynamic phase transition in the spin-1 Blume-Capel model

The nature (time variation) of response magnetization m(wt) of the spin-1 Blume-Capel model in the presence of a periodically varying external magnetic field h(wt) is studied by employing the effective-field theory (EFT) with correlations as well as the Glauber-type stochastic dynamics. We determine the time variations of m(wt) and h(wt) for various temperatures, and investigate the dynamic magnetic hysteresis behavior. We also investigate the temperature dependence of the dynamic magnetization, hysteresis loop area and correlation near the transition point in order to characterize the nature (first- or second-order) of the dynamic transitions as well as obtain the dynamic phase transition temperatures. The hysteresis loops are obtained for different reduced temperatures and we find that the areas of the loops are decreasing with the increasing of the reduced temperatures. We also present the dynamic phase diagrams and compare the results of the EFT with the results of the dynamic mean-field approximation. The phase diagrams exhibit many dynamic critical points, such as tricritical (•), zero-temperature critical (Z), triple (TP) and multicritical (A) points. According to values of Hamiltonian parameters, besides the paramagnetic (P), ferromagnetic (F) fundamental phases, one coexistence or mixed phase region, (F+P) and the reentrant behavior exist in the system. The results are in good agreement with some experimental and theoretical results.     

Extraction-ability and -selectivity of tetra-aza-crown ethers for transition metal cations

In order to investigate the relative effects of the differences between the structures and lipophilicities of 1, 10-dioxa-4, 7, 13, 16-tetra-azacyclo-octadecane (TA-18-crown-6) and the tetrabenzyl derivative of 1,10-dioxa-4, 7, 13, 16-tetra-azacyclo-octadecane (TBTA-18-crown-6) on their extraction-abilities and -selectivities for transition metal cations, constants of the overall extraction (logK _ex) of 1:1 (M:L) complexes, the distribution (K _D) for two diluents (CH₂Cl₂ and CHCl₃) with different dielectric constants have been determined at 25 ± 0.1 °C. The magnitude of logK _ex is largely determined by that of K _D. The equilibrium constants of TA-18-crown-6 have been compared with those of TBTA-18-crown-6. It is found that:(i) logK _ex sequences of TA-18-crown-6 and TBTA-18-crown-6 for transition metals in CH₂Cl₂ lie in order: Fe³⁺ > Cu²⁺ > Mn²⁺ > Co²⁺ > Cd²⁺ > Ni²⁺ > Zn²⁺ and Fe³⁺ > Cu²⁺ > Co²⁺ > Mn²⁺ > Ni²⁺ > Cd²⁺ > Zn²⁺ respectively; (ii) the stability sequences of two types of tetra-aza-crown ethers with the transition metal cations in CHCl₃ are the same as follows: Fe³⁺ > Ni²⁺ > Cu²⁺ > Co²⁺ > Zn²⁺ > Cd²⁺ > Mn²⁺, and (iii) unusual selectivities are observed for transition metal-tetra-aza-crowns, e.g. the high Fe³⁺/M ⁿ⁺ selectivity factors (S_f) of TA-18-crown-6, except for the competitive-extractions for the special case in CHCl₃ of TBTA-18-crown-6, it was found that the Mn²⁺/M ⁿ⁺ values were relatively higher according to the other transition metal cations. A systematic sequence in these two types of solvents is not found for a given transition metal cation in terms of the variation of selectivity with the tetra-aza-crown ethers. The results provide alternatives for the rational design of other specific ligands on the transition metal cations.