Full-wave analysis of waveguide-to-microstrip transitions for millimeter wave applications

A full-wave solution is presented for the waveguide to microstrip transition. The exact Green's function of the transition is used in a moment method procedure. The behavior of the microstrip transition to a rectangular waveguide is studied with respect to the critical dimensions of the microstrip width, length and backshort location. The convergence characteristics of the full wave analysis method are investigated, along with the current distribution and the input impedance. Results given for the return loss is compared with measurements.     

Piezoelectric sound generation and detection at 70 GHz using the technique of linear frequency modulation of a continuous wave

The method of linear frequency modulation of a continuous wave (FM-CW) in sound-echo experiments is demonstrated at a sound frequency of 70 GHz. A reflex klystron with a cw power of only 300 mW and a planar Hertzian resonator are used for the piezoelectric sound excitation. Applying homodyne detection, spectral echo signals are detected in the kHz range by means of a spectral analyzer. The detected echoes show an excellent signal-to-noise ratio. Details of the experimental setup and the underlying theory of the FM-CW sound experiments are presented. We observe experimentally two excited needle-like sound beams in 65 m distance, each about 30 m in diameter.     

Luminescence centers in porous silicon

Photoluminescence studies on porous silicon show that there are luminescence centers present in the surface states. By taking photoluminescence spectra of porous silicon with respect to temperature, a distinct peak can be observed in the temperature range 100–150 K. Both linear and nonlinear relationships were observed between excitation laser power and the photoluminescence intensity within this temperature range. In addition, there was a tendency for the photoluminescence peak to red shift at low temperature as well as at low excitation power. This is interpreted as indicating that the lower energy transition becomes dominant at low temperature and excitation power. The presence of these luminescence centers can be explained in terms of porous silicon as a mixture of silicon clusters and wires in which quantum confinement along with surface passivation would cause a mixing of andX band structure between the surface states and the bulk. This mixing would allow the formation of luminescence centers.     

Some properties of higher-order Darboux transformations

We introduce the operator of the Darboux transformation of order n as an nth-order differential operator transforming the solution of the one-dimensional Schrödinger equation with a given potential into the solution corresponding to a different potential. For n=1 we obtain the usual Darboux transformation. It is shown that when n1 this transformation can always be represented as a product of n first-order Darboux transformations. We discuss the relationship between higher-order Darboux transformations and the supersymmetric approach to quantum mechanics and also the algebra of the dynamical symmetry of the system.Tomsk State University. Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 7, pp. 3–8, July, 1995.     

The development of a sampler-sensor using a vanadium-oxinate-polymer film for the selective and direct determination of atmospheric ethanol

The development of a sensor for the direct and selective determination of atmospheric ethanol is in the initial stages. The sensor takes advantage of the selective chemical reaction between ethanol and vanadium oxinate. This reaction occurs in an organic medium where a red colored complex is the product. This reaction is determined spectrophotometrically where the absorbance maxima is 475 nm. The focus of this paper is to discuss the parameters necessary to develop a solid sorbent sampling-sensor which can be used to determine atmospheric ethanol.     

Lyoluminescence of luminol in aqueous amines

Lyoluminescence of luminol induced by -irradiated NaCl has been studied in aqueous amines. The emission spectra of lyoluminescence are recorded on 400 ASA Kodak film using a Fuess spectrograph. A broad continuous emission band appears in the visible region from 390 to 500 nm. The emission band showed two peaks centered at 430 and 470 nm. The 430 nm peak is more intense in secondary amines while the 470 nm band is more intense in primary amines. The mechanism of light emission is based on the comparative study of lyoluminescence, fluorescence and chemiluminescence of luminol in aqueous amines.     

A definitive method for the determination of trace amounts of cobalt in biological materials by neutron activation analysis

A new, very accurate (definitive) method for the determination of trace amounts of cobalt in biological materials has been devised. The method is based on combination of neutron irradiation with quantitative and selective post-irradiation separation of cobalt from all accompanying radionuclides followed by measurement by -ray spectrometry. Column chromatography in which owing to addition of Co carrier the course of separation can be followed visually is the key element of the separation scheme. Several criteria have been formulated which must be simultaneously fulfilled in order to acknowledge the result as obtained by a definitive method. The high accuracy of the method has been demonstrated by the analysis of several certified reference materials of widely different Co contents.     

Enzyme and microbial sensors for phosphate, phenols, pesticides and peroxides

Biosensors employing a biocatalyst on a different level of integration have been developed for monitoring environmental pollution. These probes range from laboratory specimen to commercial detectors applied to analyzers. Recent developments on amperometric enzyme and microbial biosensors are presented here. A monoenzymatic bulk-type carbon electrode is described for biosensing organic hydroperoxides in aqueous solutions; peroxidase is immobilized within the electrode body and the direct electron transfer between electrode and enzyme is measured. Both, reversible and irreversible inhibitors of acetylcholinesterase have been quantified by using a kinetically controlled acetylcholine enzyme sequence electrode. The inhibitory effect of pesticides such as butoxycarboxime, dimethoate, and trichlorfon could be quantified within 6 min in molar concentrations. Different multi-enzyme electrodes have been developed for the determination of inorganic phosphate. These sensors represent examples of sequentially acting enzymes in combination with enzymatic analyte recycling. Using this type of amplification nanomolar concentrations can be measured.