Rhenium(I)-induced cyclization of thiosemicarbazones derived from beta-keto esters

The reactions of methylacetoacetate and ethyl 2-methylacetoacetate thiosemicarbazones (H(2)L(A) and H(2)L(B), respectively) with [ReX(CO)(5)] and [ReX(CO)(3)(CH(3)CN)(2)] (X = Cl, Br) were explored under various experimental conditions. Besides the adducts fac-[ReX(CO)(3)(H(2)L)], in which the rhenium is coordinated to three carbonyl groups, the X anion, and the N,S-bidentate thiosemicarbazone ligand, the following complexes were also isolated: fac-[ReBr(CO)(3)(Hpyz(B))], the tetrameric complexes fac-[Re(pyz(A))(CO)(3)](4) and fac-[Re(pyz(B))(CO)(3)](4), and fac-[Re(pyz(B))(CO)(3)(H(2)O)] (where Hpyz(A) and Hpyz(B) are pyrazolones derived by cyclization of H(2)L(A) and H(2)L(B), respectively). The cyclization reactions were monitored by (1)H NMR spectroscopy and the complexes isolated were identified by elemental analysis, mass spectrometry, IR and (1)H NMR spectroscopy, and in some cases by X-ray diffractometry. The isolation and the full structural identification of the rather unusual fac-[ReBr(CO)(3)(Hpyz(B))], which contains the enol form of the pyrazolone ligand, affords new insight into the cyclization of thiosemicarbazones derived from beta-keto esters.     

Visualizing defects and pore connectivity within metal–organic frameworks by X-ray transmission tomography

Metal–Organic Frameworks (MOFs) have the potential to change the landscape of molecular separations in chemical processes owing to their ability of selectively binding molecules. Their molecular sorting properties generally rely on the micro- and meso-pore structure, as well as on the presence of coordinatively unsaturated sites that interact with the different chemical species present in the feed. In this work, we show a first-of-its-kind tomographic imaging of the crystal morphology of a metal–organic framework by means of transmission X-ray microscopy (TXM), including a detailed data reconstruction and processing approach. Corroboration with Focused Ion Beam-Scanning Electron Microscopy (FIB-SEM) images shows the potential of this strategy for further (non-destructively) assessing the inner architecture of MOF crystals. By doing this, we have unraveled the presence of large voids in the internal structure of a MIL-47(V) crystal, which are typically thought of as rather homogeneous lattices. This challenges the established opinion that hydrothermal syntheses yield relatively defect-free material and sheds further light on the internal morphology of crystals.

TXM-tomography unraveled large macropore defects within a MIL-47(V) MOF crystal. These pores do not seem to be well connected and they show a preferential orientation.     

An improved method of characterizing fatty acids by equivalent chain length values

A method has been developed for calculating more accurate and reproducible equivalent chain length (ECL) values of 33 straight-chain fatty acids (FA), with various positions and numbers of cis double bonds, chromatographed on DB-Wax and DB-1 columns. The dependence of ECL values on the position and the number of double bonds is described, as is a method of utilizing these relationships for the characterization of FA by gas chromatography.     

A ferrocene-based heteroditopic ligand for electrochemical sensing of cations and anions

A ferrocene-based heteroditopic receptor containing urea and crown ether units shows electrochemical responses to dihydrogenphosphate and fluoride anions. K+ cations can only be detected in the presence of dihydrogenphosphate.     

Determination of azolic fungicides in wine by solid-phase extraction and high-performance liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry

A method for simultaneous analysis of eight azolic fungicides: cyproconazole, diniconazole, tetraconazole, thiabendazole, flusilazole, triadimenol, triadimefon, carbendazim and the degradation product 2-aminobenzimidazole in wine samples is described. The compounds are isolated from the samples and concentrated by solid-phase extraction on polymeric cartridges. The determination is carried out by liquid chromatography with mass spectrometric detection in positive ionization and selected ion monitoring modes. The influence of parameters such as the mobile phase composition, column temperature, corona current and fragmentor voltage is studied and the proposed method is validated. Recoveries of the nine compounds added to wine samples range from 83 to 109%, with relative standard deviations below 10%. The quantitation limits are between 9 and 31 microg/L. Real wine samples are analyzed by the proposed method, also.     

Application of principal component regression to the determination of Captopril by differential pulse polarography with no prior removal of dissolved oxygen

As shown in this paper, multivariate calibration in general and principal component regression (PCR) in particular allow the determination of Captopril by differential pulse polarography (DPP) in the presence of oxygen despite the overlap between their polarographic bands. Electrochemical parameters (pulse amplitude, pulse delay and drop time) are optimized from response surfaces using PCR to determine the relationship between the variables to be optimized and the relative square error of prediction (RSEP), which was adopted as the parameter to be minimized. The proposed method is quite fast and inexpensive as a result of the decreased analysis times and sparing use of the inert gas. It was applied to the determination of Captopril in synthetic samples and a commercially available pharmaceutical preparation, with relative errors and confidence intervals <2.5% and 2.0%, respectively. It should be noted that the sample can be analysed directly following dissolution in water without the need to remove the excipients.     

As, Bi, Sb and Sn determination in atmospheric particulate matter by direct solid sampling-hydride generation-electrothermal atomic absorption spectrometry

A novel, rapid and simple method by hydride generation-electrothermal atomic absorption spectrometry (HG-ETAAS) after direct As, Bi, Sb and Sn hydrides generation from untreated filters of atmospheric particulate matter (PM₁₀ and PM_2.5) was optimised. PM₁₀ and PM_2.5 were not subjected to any pre-treatment: circular portions between 0.28 and 6.28 cm² were directly placed into the reaction vessel of a batch mode generation system. A 2⁸ × 3/64 Plackett–Burman design was used as a multivariate strategy for the evaluation of the effects of several variables affecting the hydride generation, trapping and atomisation efficiencies. Trapping temperature was the most statistically significant variable for As, Bi and Sn. Atomisation temperature was also statistically significant for Sb determination. Optimum values of significant variables were selected by using univariate optimisation approaches. An aqueous calibration method was used throughout. The developed method has been found to be precise with relative standard deviations of 6.2, 5.3, 9.1 and 7.5% for 11 determinations in a filter sample containing 0.7, 1.0, 1.4 and 1.7 μg l⁻¹ for As, Bi, Sb and Sn, respectively. Results obtained by direct solid sampling-HG-ETAAS have been found statistically comparable with those obtained after conventional method based on an acid digestion followed to ICP-MS. Absolute detection limits were 37, 15, 30, and 41 ng l⁻¹ for As, Bi, Sb and Sn, respectively. Detection limits referred to the air volume sampled (in the range of 0.020–0.050 ng m⁻³) were low enough for the determination of several hydride-forming elements from PM₁₀ and PM_2.5 samples collected in a non-polluted suburban area of A Coruña (NW Spain).     

Symmetry numbers and chemical reaction rates

This article shows how to evaluate rotational symmetry numbers for different molecular configurations and how to apply them to transition state theory. In general, the symmetry number is given by the ratio of the reactant and transition state rotational symmetry numbers. However, special care is advised in the evaluation of symmetry numbers in the following situations: (i) if the reaction is symmetric, (ii) if reactants and/or transition states are chiral, (iii) if the reaction has multiple conformers for reactants and/or transition states and, (iv) if there is an internal rotation of part of the molecular system. All these four situations are treated systematically and analyzed in detail in the present article. We also include a large number of examples to clarify some complicated situations, and in the last section we discuss an example involving an achiral diasteroisomer.     

A new selective cleavage of n,n-dicarbamoyl-protected amines using lithium bromide

A mild and new procedure for the selective cleavage of an alkoxycarbonyl group (Boc, CBz) in N,N-dicarbamoyl-protected amino compounds is described. The method is based on the use of lithium bromide in acetonitrile and is compatible with a large range of other functionalities present in the substrates. Compared with other reported methodologies, the procedure is particularly useful for the Cbz-selective cleavage in N,N-Ts,Cbz-diprotected amines. A rationalization of the selectivity supported by ab initio calculations is also presented.     

Co(II), Ni(II) and Cu(II) complexes of 1,4-di-(1-hydroxyimino-2-phenyl-2-oxo-ethylamino)benzene

The ligand has been prepared from ω-chloroisonitrosoacetophenone and 1,4-phenylenediamine in the presence of NaHCO₃. The ligand have a C=O group and an –NH–R group adjacent to the oxime group. The Ni(II), Cu(II) and Co(II) complexes of the synthesized ligand were prepared and their structures were identified using FTIR, UV-Vis spectral data, elemental analysis, thermal analysis and magnetic moment measurements. The metal-ligand ratios were found to be 3:2. The ligands were found to coordinate to the metal ions via the oxime nitrogen, oxime oxygen, one of the carbonyl group and amide nitrogen atoms. Thermal analyses data reveals that the water in the complexes was found to be non-coordinated to the metal ions. In the trinuclear structures, the metals have the tetrahedral environments.