Über die Wahl der Lösungsmittelsysteme bei der papierchromatographischen Trennung organischer Verbindungen

Zusammenfassung An praktischen Beispielen wurde gezeigt, in welcher Weise die Trennung organischer Verbindungen mittels Papierchromatographie erzielt werden kann. Man ist nicht auf einige bewährte Lösungsmittel systeme allein angewiesen, sondern kann von Fall zu Fall systematisch neue und geeignete Systeme benützen. Es hat sich bewährt, sich nach den elementaren Löslichkeitsregeln für organische Stoffe zu richten, unter der Voraussetzung, daß die zu chromatographierende Verbindung in der stationären Phase gut, in der mobilen Phase dagegen weniger löslich ist. Durch Änderung der stationären Phase (Wasser, nicht wäßriges, polares Lösungsmittel, nicht polares Lösungsmittel) oder der Polarität und Zusammensetzung der mobilen Phase kann man das Wandern der Flecke am Chromatogramm beeinflussen, beliebige R_fWerte erhalten und in vielen Fällen auch eine beliebige Reihenfolge der Verbindungen am Chromatogramm erzielen.Da die Löslichkeit organischer Verbindungen von intermolekularen Kräften abhängig ist, erscheint das Problem im Zusammenhang mit strukturellen Einflüssen sehr kompliziert und muß für jeden Fall auf eigene Weise gelöst werden. Die Löslichkeitseigenschaften können weiter durch Benutzung reaktiver Lösungsmittel beeinflußt werden, die z. B. die Verbindungen in wasserlösliche Salze überführen können. Dabei ist an die möglichen Komplikationen, die bei ionisierbaren Verbindungen durch Dissoziation und Hydrolyse entstehen können, zu achten.Von den Hauptfaktoren, die eine Trennung ermöglichen können, seien die folgenden erwähnt: funktionelle Gruppen, ihre Anzahl, Polarität, gegenseitige Stellung, bzw. ihre Basizität oder Azidität, C-Atomanzahl in homologen Verbindungen, inter- und intramolekulare Wasserstoffbindungen, sterische Faktoren u. a. Es ist dann von der Art des gewählten Lösungsmittelsystems abhängig, welche der genannten Faktoren im Vordergrund stehen und welche beseitigt werden.Wenn die Löslichkeitsunterschiede der zu trennenden Stoffe zu gering sind, um gute Trennungen zu ermöglichen, ist es zweckmäßig, die Verbindungen in solche Derivate zu überführen, deren Strukturunterschiede größer sind.

---

Summary Practical examples are given to show how organic compounds can be separated by means of paper chromatography. The operator is not limited to tested solvent systems, but can use new suitable systems as the occasion demands. It has been found best to abide by the elementary rules of solubility of organic compounds, provided the compound to be chromatographed is quite soluble in the stationary phase but less soluble in the mobile phase. By altering the stationary phase (water, nonaqueous, polar solvent, non-polar solvent) or the polarity and composition of the mobile phase, the migration of the stains in the chromatogram can be influenced, selectedR _f -values can be obtained, and in many cases it is also possible to secure a desired succession of the compounds on the chromatogram.Since the solubility of organic compounds depends on intermolecular forces, the problem in connection with structural influences appears very complicated and must be solved individually for each case. Moreover, the solubility characteristics can be affected by using reactive solvents; for instance, the compounds can be converted into water soluble salts. Under such circumstances, sight must not be lost of the complications which may arise because of the dissociation and hydrolysis of ionizable compounds. The following are among the chief factors, which may make a separation possible: functional groups, their number, polarity, relative position, their basicity or acidity, C-atom number in homologous compounds, inter- and intramolecular hydrogen bonds, steric factors, etc. It then depends on the type of solvent system selected, which of these factors are predominant and which can be neglected or eliminated.If the solubility differences are too slight to permit good separations, the compounds to be separated should, if possible, be converted into derivatives whose structural differences are more pronounced.

---

Résumé Des exemples pratiques montrent comment il est possible d'effectuer la séparation de combinaisons organiques par Chromatographie sur papier. Il n'est pas uniquement fait appel à des systèmes de solvants éprouvés mais, dans certains cas, de nouveaux systèmes appropriés sont systématiquement utilisés.Il s'est avéré satisfaisant de faire appel aux règles élémentaires de solubilité des substances organiques sous réserve que la combinaison à chromatographier soit suffisamment soluble dans la phase stationnaire et moins soluble dans la phase mobile. En faisant varier la phase stationnaire (eau, solvant non aqueux, solvant polaire, solvant non polaire) ou la polarité et la composition de la phase mobile, il est possible d'influencer la migration des taches du chromatogramme, d'obtenir des valeurs deR _f désirées et, dans de nombreux cas, d'obtenir les combinaisons dans un ordre déterminé sur le chromatogramme.La solubilité des combinaisons organiques étant fonction des forces intermoléculaires il en résulte que le problème se complique considérablement dans la mesure où l'on considère les influences structurelles et que chaque cas particulier doit recevoir une solution qui lui est propre. Les propriétés de solubilité peuvent en outre être influencées par l'emploi de solvants réactifs qui peuvent transformer, par exemple les combinaisons en sels solubles dans l'eau. Il faut alors tenir compte des possibilités de complications qui peuvent apparaître par dissociation et hydrolyse des combinaisons ionisables.Parmi les principaux facteurs qui permettent une séparation, il convient de mentionner les suivants: les groupes fonctionnels, leur nombre, leur polarité, leur position relative, ou encore leur acidité ou leur basicité, le nombre d'atomes de carbone de combinaisons homologues, les liaisons hydrogène inter- et intramoléculaires, les facteurs stériques, etc. Suivant la nature du système solvant choisi pourront alors varier les facteurs dont l'effet est prépondérant et ceux dont l'effet est nul. Lorsque les différences de solubilité des substances à séparer sont trop faibles pour permettre des séparations satisfaisantes, il est commode de transformer les combinaisons en dérivés dont les différences de structure soient plus importantes.

     

Anionic copper complex fragmentations from enkephalins under low-energy collision-induced dissociation in an ion trap mass spectrometer

Peptide metallation with Cu2+ was explored in the negative ESI mode using an ion trap mass spectrometer. Under these conditions, the [(M-3H) + CuII]- species formed were investigated under low-energy collision-induced dissociation conditions. MS2 experiments indicate a very different behavior of CuII metallated complexes compared with [M-H]- species. CuII induces an easy loss of CO2 and specific side-chain cleavages (by radical losses) at the C-terminal residue, as observed previously by prompt 'in source' dissociation experiments. The loss of CO2 yields an unstable carbylide that leads to further dissociations involving the migration of a proton or a hydrogen radical (through the reduction of CuII). Multistage MS3 experiments were carried out to rationalize this behavior. Fragmentation pathways are proposed in order to explain the product ions observed. The side-chain radical loss at the C-terminus was demonstrated to be a consecutive process. Finally, evidence is provided that the specific side-chain cleavages can be used for the differentiation of Leu/Ile and Gln/Lys residues when they are located at the C-terminus. The existence of a zwitterionic form in the case of the anionic YGGFK-CuII complex is proposed.     

Methyl cellulose-based edible films and coatings I. Effect of plasticizer content on water and 1-octen-3-ol sorption and transport

Edible films were prepared from methyl cellulose with various concentrations of poly(ethylene glycol) 400 (PEG400) used as a plasticizer. Water vapour and 1-octen-3-ol (an aroma compound) were selected as hydrophilic and hydrophobic volatile penetrants respectively. Their solubility and permeability through methyl cellulose-based edible films were studied using gas chromatography methods. Whatever penetrant was used, the flux increased with the PEG400 content. Transfer behaviour, i.e., the order of increased magnitude of the transfer rate, strongly depends on the nature of the volatile compound. However, water sorption only depends on the PEG400 content whereas the aroma compound sorption is affected by both the water and the PEG400 concentrations. Relationships between solubility and permeability can be partially explained by the plasticization phenomenon.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Summary. Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

Synthesis and polymerization of racemic and optically active β-substituted β-propiolactones. II: β-monosubstituted and β-disubstituted monomers and polymers with different optical purities

β-(trichloromethyl)-β-propiolactone (CCl₃-PL), β-(trifluoromethyl,methyl)-β-propiolactone (CF₃, Me-PL) and β-(trifluoromethyl,ethyl)-β-propiolactone (CF₃,Et-PL) have been obtained by the reaction of ketene with chloral, 1,1,1-trifluoroacetone and 1,1,1-trifluorobutanone, respectively. Chiral catalysis lead to optically active monomers. The enantiomeric excess of the lactones has been measured by ¹H-NMR spectroscopy, in the presence of 2,2,2-trifluoro-1-(9-anthryl)ethanol or an europium chiral shift reagent. Polymerizations have been carried out in bulk or in toluene, at 60°C or 80°C, using mainly organometallic initiators. The Polymers become insoluble and crystalline at enantiomeric excesses over 80% for CCl₃-PL and 70% for CF₃,Me-PL. Melting temperatures were recorded from 238 to 268°C for poly(CCl₃-PL) and from 78 to 100°C for poly(CF₃,Me-PL), depending upon the molecular weight and the enantiomeric excess. The ¹³C-NMR specroscopy of poly(CCL₃-PL) indicates that the polymerization of the corresponding lactone leads to polymers of increasing degrees of isotacticity with the enantiomeric excess of the monomer.     

Laser studies of vibrational energy transfer and relaxation of CO trapped in solid neon and argon

The infrared emission of CO trapped in solid Ne and Ar is observed at low temperature. The first vibrational level of ¹²C¹⁶O is excited by a Q-switched frequency doubled CO₂ laser. The emission spectrum consists of several lines arising from upper vibrational levels of ¹²C¹⁶O and also of ¹³C¹⁶O and ¹²C¹⁸O which are present in natural abundance. An interpretation is proposed which is based on the assumption that long range dipole—dipole interaction is the main physical process involved in these experiments. Resonance energy transfer produces an energy migration among ¹²C¹⁶O molecules without any change in vibrational populations. Phonon assisted energy transfer takes place between vibrational levels of the various isotopic species present in the solution. In order to satisfy the resonance condition a phonon is emitted or absorbed whose energy compensates for the energy mismatch between the transitions in each interacting molecule due to isotopic effect and or vibrational anharmonicity. The range of this process is greatly extended by energy migration. At the low phonon bath temperature phonon emission is much more probable than phonon absorption. So a strong excitation of upper vibrational levels with in some cases population inversions is observed.Molecular impurities act as efficient quenching centers even at very low concentration. When highly purified samples are used, the fluorescence decay time is found to be 20.6 ms in Ne and 14.5 ms in Ar and does not significantly depend upon concentration and temperature. It is concluded that radiationless relaxation is unimportant.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Biotreatment of tannin-rich beer-factory wastewater with white-rot basidiomycete Coriolopsis gallica monitored by pyrolysis/gas chromatography/mass spectrometry

Some fractions of beer-factory wastewaters represent an important environmental concern owing to their high content of polyphenols and dark-brown color. The capacity of Coriolopsis gallica to preferentially degrade lignin has been successfully applied in our laboratory to the biotreatment and decolorization of paper-industry effluents. In this work, the ability of this white-rot fungus to degrade high-tannin-containing wastewaters is evaluated. Under all the conditions studied, effluent decolorization and chemical oxygen demand reduction achieved by C. gallica at day 12 of incubation were close to 50 and 65%, respectively. No adhesion of dark color to the fungal mycelium was observed suggesting that decolorization could be ascribed to C. gallica degradation systems. Mycelium dry-weight values showed that C. gallica is tolerant to relatively high tannin content present in the effluent samples. In the sample containing the highest effluent concentration (60% v/v), dry-weight values suggested an inhibition of fungal growth at day 6 of incubation and a further adaptation of the fungus to the stressing tannin effect at day 12 of fungal treatment. Pyrolysis/gas chromatography/mass spectrometry results showed a decrease of polyphenols pyrolysis products, mainly phenol and guaiacol, with the incubation time. All these results indicate the potential use of C. gallica in bioremediation of tannin-containing industrial wastewaters and in other applications where a reduction in polyphenols content is required.     

Radionuclides in a sediment trap and bottom sediment samples from the eastern Turkish coast of the Black Sea

Summary Radionuclide (¹³⁷Cs, ²³⁸U, ²³²Th and ⁴⁰K) concentrations were determined in a sediment trap and bottom sediment samples collected from a station at the eastern Turkish coast of the Black Sea. The specific activity of the ¹³⁷Cs radionuclide in the settling particles ranged from 0.04±0.01 to 0.10±0.02 Bq^. g^-1dry weight. The calculated flux rate of the ¹³⁷Cs was between 0.37 and 2.59 Bq^. m^-2. d^-1in the sampling periods of 2002 and 2003. The ¹³⁷Cs concentration in the bottom sediment profile were between 0.039±0.013-9.083±0.017 Bq^. g^-1dry weight in the same station. The vertical profile of the radionuclides suggests that they have little mobility during the 17 years after the Chernobyl accident.