Correlation between rheological properties of zinc carboxylate liquids and molecular structure

Using Fourier transform infrared spectroscopy (FTIR), the viscosity of zinc 2-ethylhexanoate liquid has been found to correlate with the intensity of an asymmetric COO stretching resonance at 1632 cm-1. This is consistent with the presence of the zinc carboxylate polymer, catena-2-ethylhexanato-(O,O')-tri-micro-2-ethylhexanato-(O,O')-dizinc(II) as the origin of the viscosity, a conclusion that is further supported by theoretical predictions. Density functional theory has been used to assign the IR spectra of the zinc carboxylate dimer, catena-2-ethylhexanato-(O,O')-di-(tri-micro-2-ethylhexanato-(O,O')-dizinc(II)-formic) acid, and the model of the molecular liquid, micro-4-oxo-hexakis-(micro-2-ethylhexanato)-tetrazinc(II). The predicted spectra indicate that the decreased symmetry of the polymer relative to the zinc 2-ethylhexanoate liquid increases the intensity of the asymmetric carboxylate stretch at 1632 cm-1 and leads to the observed correlation.     

Unexpected inverse correlations and cooperativity in ion-pair phase transfer

Liquid/liquid extraction is one of the most widely used separation and purification methods, where a forefront of research is the study of transport mechanisms for solute partitioning and the relationships that these have to solution structure at the phase boundary. To date, organized surface features that include protrusions, water-fingers, and molecular hinges have been reported. Many of these equilibrium studies have focused upon small-molecule transport – yet the extent to which the complexity of the solute, and the competition between different solutes, influence transport mechanisms have not been explored. Here we report molecular dynamics simulations that demonstrate that a metal salt (LiNO₃) can be transported via a protrusion mechanism that is remarkably similar to that reported for H₂O by tri-butyl phosphate (TBP), a process that involves dimeric assemblies. Yet the LiNO₃ out-competes H₂O for a bridging position between the extracting TBP dimer, which in-turn changes the preferred transport pathway of H₂O. Examining the electrolyte concentration dependence on ion-pair transport unexpectedly reveals an inverse correlation with the extracting surfactant concentration. As [LiNO₃] increases, surface adsorbed TBP becomes a limiting reactant in correlation with an increased negative surface charge induced by excess interfacial NO₃⁻, however the rate of transport is enhanced. Within the highly dynamic interfacial environment, we hypothesize that this unique cooperative effect may be due to perturbed surface organization that either decreases the energy of formation of transporting protrusion motifs or makes it easier for these self-assembled species to disengage from the surface.

A forefront of research in separations science (specifically liquid–liquid extraction) is the study of transport mechanisms for solute partitioning, and the relationships that these have to solution structure at the phase boundary.     

Cooperative motions in PVC studied by thermally stimulated currents: Comparison with A.C. dielectric derivative analysis

The thermally stimulated current–thermal sampling (TSC–TS) technique was used to study the broadened glass transition in conventional “atactic” poly(vinyl chloride), PVC. The activated parameters obtained from the TSC–TS data, mainly the apparent activation energy (E_a), characterize the breadth of glass transitions in a very sensitive way. These results are compared with those values of E_a obtained from the literature, using a recently proposed method of analyzing a.c. dielectric constants and their derivatives, over the temperature range of −100–130°C. Both techniques detect weak cooperative glass transition-like relaxations well below the main glass transition of ca. 80°C. As is the case with “atactic” PMMA, the data suggest that compositional heterogeneity related to a small fraction of predominantly isotactic sequences contribute to the broad glass transition extending ca. 60°C below the main glass transition in atactic PVC. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 913–918, 1998     

Systems-based design of bi-ligand inhibitors of oxidoreductases: filling the chemical proteomic toolbox

Genomics-driven growth in the number of enzymes of unknown function has created a need for better strategies to characterize them. Since enzyme inhibitors have traditionally served this purpose, we present here an efficient systems-based inhibitor design strategy, enabled by bioinformatic and NMR structural developments. First, we parse the oxidoreductase gene family into structural subfamilies termed pharmacofamilies, which share pharmacophore features in their cofactor binding sites. Then we identify a ligand for this site and use NMR-based binding site mapping (NMR SOLVE) to determine where to extend a combinatorial library, such that diversity elements are directed into the adjacent substrate site. The cofactor mimic is reused in the library in a manner that parallels the reuse of cofactor domains in the oxidoreductase gene family. A library designed in this manner yielded specific inhibitors for multiple oxidoreductases.     

Photochemistry in Real Space: Batho- and Hypsochromism in the Water Dimer

The development of chemical intuition in photochemistry faces several difficulties that result from the inadequacy of the one-particle picture, the Born–Oppenheimer approximation, and other basic ideas used to build models. It is shown herein how real-space approaches can be efficiently used to gain valuable insights in photochemistry through a simple example of red and blue shift effects: the double hypso- and bathochromic shifts in the low-lying valence excited states of (H₂O)₂. It is demonstrated that 1) the use of these techniques allows the perturbative language used in the theory of intermolecular interactions, even in the strongly interacting short-range regime, to be maintained; 2) one and only one molecule is photoexcited in each of the addressed excited states and 3) the electrostatic interaction between the in-the-cluster molecular dipoles provides a fairly intuitive rationalisation of the observed batho- and hypsochromism. The methods exploited and illustrated herein are able to maintain the individuality and properties of the interacting entities in a molecular aggregate, and thereby they allow chemical intuition in general states, at any geometry and using a broad variety of electronic structure methods to be kept and built.     

Surface tension and adsorption behavior of mixtures of diacyl glycerol arginine-based surfactants with DPPC and DMPC phospholipids

The binary surface interactions of some novel cationic diacyl glycerol arginine-based surfactants with model phospholipids, which are often used as model membrane components, are studied at 25 °C in aqueous solutions of 0.1 M sodium chloride. The surfactants are 1,2-dimyristoyl-rac-glycero-3-O-(N^α-acetyl-l-arginine) hydrochloride (1414RAc) and 1,2-dilauroyl-rac-glycero-3-O-(N^α-acetyl-l-arginine) hydrochloride (1212RAc), and they are important as potential antimicrobial agents which are biodegradable and with less toxicity than other cationic surfactants. The phospholipids are 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC) and 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC). The equilibrium and dynamic surface tension of each surfactant, each phospholipid, and some of their binary mixtures are studied using the bubble surfactometry method at constant area or pulsating area conditions. In addition, the surface densities of pure and mixed monolayers of these compounds at the air/water interface are probed with infrared reflection–absorption spectroscopy (IRRAS). Steady state and dynamic surface tension synergism, or antisynergism in one case, and synergistic adsorption effects are detected for the mixed dispersions studied. The enhanced adsorption detected with IRRAS, and the enhanced dynamic and steady state surface tension lowering indicate strong miscibility and net attractive interactions between the compounds in the adsorbed mixed monolayers.     

Structure modulated electronic contributions to metalloenediyne reactivity: synthesis and thermal Bergman cyclization of MLX2 compounds

The synthesis of novel metalloendiyne complexes MLRX(2) (where L = 1,4-dibenzyl/diethyl-1,4-diaza-cyclododec-8-ene-6,10-diyne, X = halogen) are reported with their X-ray crystal structures and thermal Bergman cyclization temperatures. Two distinct types of constructs are obtained; the Zn(II) compounds are tetrahedral, while the Cu(II) and the Pd(II) compounds are all distorted- or square-planar. Each possesses structurally similar enediyne conformations and critical distances (3.75-3.88 A). The tetragonal Cu(II) species all exhibit Bergman cyclization temperatures between 140 and 150 degrees C in the solid state, while the square-planar Pd(II) analogues possess similar critical distances but cyclize at significantly higher temperatures (205-220 degrees C). In contrast, the Zn(II) derivatives show a marked halogen dependence, with X = Cl having the highest Bergman cyclization temperature, which is comparable to the Pd(II) square-planar set, while the ZnLX(2) compound with X = I shows the lowest Bergman cyclization temperature (144 degrees C), similar to the Cu(II) derivatives. Moreover, for the planar constructs, the R group has little influence on the cyclization temperatures; however, for the tetrahedral ZnLX(2) compounds, the steric influence of the R group plays a more significant role in the cyclization reaction coordinate by influencing the stability of the precyclized intermediate. This complex set of results is best interpreted by a combination of steric contributions and electronic interactions between the halogen through space (in the case of Zn(II)) and through bonds (in the case of Pd(II)) and the pi orbitals of the endiyne fragment. In contrast, for Cu(II) systems, the distorted square-planar geometry permits neither direct through space nor symmetry-allowed through bond communication between the orbital partners, and thus little variation in Bergman cyclization reactivity is observed.     

Ionic liquids as mobile phase additives in high-performance liquid chromatography with electrochemical detection: Application to the determination of heterocyclic aromatic amines in meat-based infant foods

The beneficial effects of several ionic liquids (ILs) as mobile phase additives in high-performance liquid chromatography with electrochemical detection for the determination of six heterocyclic aromatic amines (HAs) have been evaluated for first-time. The studied ionic liquids were 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF₄), 1-hexyl-3-methylimidazolium tetrafluoroborate (HMIm-BF₄) and 1-methyl-3-octylimidazolium tetrafluoroborate (MOIm-BF₄). Several chromatographic parameters have been evaluated in the presence or absence of ILs, or using ammonium acetate as the most common mobile phase additive, with three different C18 stationary phases. The effect of the acetonitrile content was also addressed. In general, best resolution, lower peak-widths (up to 72.1% lower) and lower retention factors are obtained when using ILs rather than ammonium acetate as mobile phase additives. The main improvement was obtained in the baseline noise, being 360% less noisy for BMIm-BF₄, 310% for HMIm-BF₄, and 227% for MOIm-BF₄, when compared to ammonium acetate at +1000 mV. Different chromatographic methods using the best conditions for each IL were also evaluated and compared. Finally, the best chromatographic conditions using 1 mM of BMIm-BF₄ as mobile phase additive, the Nova-Pak^® C18 column, 19% (v/v) of acetonitrile content in the mobile phase, and +1000 mV in the ECD, have been applied for the chromatographic analysis of six HAs contained in meat-based infant foods. The whole extraction method of meat-based infant foods using focused microwave-assisted extraction and solid-phase extraction has also been optimized. Extraction efficiencies up to 89% and detection limits ranged between 9.30 and 0.165 ng g⁻¹ have been obtained under optimized conditions.     

Research about transmission of the mechanical vibration done by machine-tools on the group of bones shoulder-neck-head

Different researches have shown that long–term exposure to whole–body vibration can induce different injuries like back pain, injuries of the different part of the body, disturbing the physical and intellectual activities. The resulted diseases could be occasional or could be for ever. Bearing in mind that vibration is applied on the hand or feet, the health rick can be assessed if the forces transmitted in the shoulder during vibration are known. To estimate the forces a biomechanical model has been developed in which the shoulder, neck and head are represented by rigid bodies. The bodies are connected by visco–elastic joint elements. The applied forces are resulted from experimental measurements. To assess the health risk the forces must be divised in two components, an ascendant one and a descendent one. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)