Stereoselective Synthesis of Tris-endo-tricyclo [5.2.1.04,10]decane-2,5,8-triamine

The title compound has been stereoscelectively obtained by a two-step process involving the catalytic hydrogenation of triketone 2 in the presnece of benzylamine with a partially deactivated catalyst.     

Synthesis and morphology of model PS‐b‐PDMS copolymers

True model linear poly(styrene‐b‐dimethylsiloxane) PS‐b‐PDMS copolymers were synthesized by using sequential addition of monomers and anionic polymerization (high‐vacuum techniques), employing the most recent experimental procedures that allow the controlled polymerization of each monomer to obtain blocks with controlled molar masses. The model diblock copolymers obtained were analyzed by using different techniques, such as size‐exclusion chromatography, ¹H NMR, Fourier transform infrared spectroscopy, small angle X‐rays scattering (SAXS), and wide angle X‐rays scattering (WAXS). The PS‐b‐PDMS copolymers obtained showed narrow molar mass distribution and variable PDMS content, ranging from 2 up to 55 wt %. Compacted powder samples were investigated by SAXS to reveal their structure and morphology changes on thermal treatment in the interval from 30 to 200 °C. The sample with the highest PDMS content exhibits a lamellar morphology, whereas two other samples show hexagonally packed cylinders of PDMS in a PS matrix. For the lowest PDMS content samples, the SAXS pattern corresponds to a disordered morphology and did not show any changes on thermal treatment. Detailed information about the morphology of scattering domains was obtained by fitting the SAXS scattering curves. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3119–3127, 2010     

Physical Characterization and Reactivity of the Uranyl Peroxide [UO(2)(η(2)-O(2))(H(2)O)(2)]·2H(2)O: Implications for Storage of Spent Nuclear Fuels

The unusual uranyl peroxide studtite, [UO(2)(η(2)-O(2))(H(2)O)(2)]·2H(2)O, is a phase alteration product of spent nuclear fuel and has been characterized by solid-state cyclic voltammetry. The voltammogram exhibits two reduction waves that have been assigned to the U(VI/V) redox couple at -0.74 V and to the U(V/IV) redox couple at -1.10 V. This potential shows some dependence upon the identity of the cation of the supporting electrolyte, where cations with larger ionic radii exhibit more cathodic reduction potentials. Raman spectroelectrochemistry indicated that exhaustive reduction at either potential result in a product that does not contain peroxide linkers and is likely to be UO(2). On the basis of the reduction potentials, the unusual behavior of neptunium in the presence of studtite can be rationalized. Furthermore, the oxidation of other species relevant to the long-term storage of nuclear fuel, namely, iodine and iodide, has been explored. The phase altered product should therefore be considered as electrochemically noninnocent. Radiotracer studies with (241)Am show that it does not interact with studtite so mobility will not be retarded in repositories. Finally, a large difference in band gap energies between studtite and its dehydrated congener metastudtite has been determined from the electronic absorption spectra.     

Lanthanide(III) complexes with ligands derived from a cyclen framework containing pyridinecarboxylate pendants. The effect of steric hindrance on the hydration number

Two new macrocyclic ligands, 6,6′-((1,4,7,10-tetraazacyclododecane-1,7-diyl)bis(methylene))dipicolinic acid (H2DODPA) and 6,6′-((4,10-dimethyl-1,4,7,10-tetraazacyclododecane-1,7-diyl)bis(methylene))dipicolinic acid (H2Me-DODPA), designed for complexation of lanthanide ions in aqueous solution, have been synthesized and studied. The X-ray crystal structure of [Yb(DODPA)](PF6)·H2O shows that the metal ion is directly bound to the eight donor atoms of the ligand, which results in a square-antiprismatic coordination around the metal ion. The hydration numbers (q) obtained from luminescence lifetime measurements in aqueous solution of the Eu(III) and Tb(III) complexes indicate that the DODPA complexes contain one inner-sphere water molecule, while those of the methylated analogue H2Me-DODPA are q = 0. The structure of the complexes in solution has been investigated by 1H and 13C NMR spectroscopy, as well as by theoretical calculations performed at the density functional theory (DFT; mPWB95) level. The minimum energy conformation calculated for the Yb(III) complex [Λ(λλλλ)] is in good agreement with the experimental structure in solution, as demonstrated by the analysis of the Yb(III)-induced paramagnetic 1H shifts. The nuclear magnetic relaxation dispersion (NMRD) profiles recorded for [Gd(Me-DODPA)]+ are typical of a complex with q = 0, where the observed relaxivity can be accounted for by the outer-sphere mechanism. However, [Gd(DODPA)]+ shows NMRD profiles consistent with the presence of both inner- and outer-sphere contributions to relaxivity. A simultaneous fitting of the NMRD profiles and variable temperature 17O NMR chemical shifts and transversal relaxation rates provided the parameters governing the relaxivity in [Gd(DODPA)]+. The results show that this system is endowed with a relatively fast water exchange rate k(ex)(298) = 58 × 10(6) s(–1).     

Sensitivity of the properties of ruthenium "blue dimer" to method, basis set, and continuum model

The ruthenium "blue dimer" [(bpy)(2)Ru(III)OH(2)](2)O(4+) is best known as the first well-defined molecular catalyst for water oxidation. It has been subject to numerous computational studies primarily employing density functional theory. However, those studies have been limited in the functionals, basis sets, and continuum models employed. The controversy in the calculated electronic structure and the reaction energetics of this catalyst highlights the necessity of benchmark calculations that explore the role of density functionals, basis sets, and continuum models upon the essential features of blue-dimer reactivity. In this paper, we report Kohn-Sham complete basis set (KS-CBS) limit extrapolations of the electronic structure of "blue dimer" using GGA (BPW91 and BP86), hybrid-GGA (B3LYP), and meta-GGA (M06-L) density functionals. The dependence of solvation free energy corrections on the different cavity types (UFF, UA0, UAHF, UAKS, Bondi, and Pauling) within polarizable and conductor-like polarizable continuum model has also been investigated. The most common basis sets of double-zeta quality are shown to yield results close to the KS-CBS limit; however, large variations are observed in the reaction energetics as a function of density functional and continuum cavity model employed.     

pH-Sensitive surfactants from lysine: assessment of their cytotoxicity and environmental behavior

The toxicity and environmental behavior of new pH-sensitive surfactants from lysine are presented. Three different chemical structures are studied: surfactants with one amino acid and one alkyl chain, surfactants with two amino acids on the polar head and one alkyl chain, and gemini surfactants. The pH sensitivity of these compounds can be tuned by modifying their chemical structures. Cytotoxicity has been evaluated using erythrocytes and fibroblast cells. The toxic effects against these cells depend on the hydrophobicity of the molecules as well as their cationic charge density. The effect of hydrophobicity and cationic charge density on toxicity is different for each type of cells. For erythrocytes, the toxicity increases as hydrophobicity and charge density increases. Nevertheless, for fibroblasts cationic charge density affects cytotoxicity in the opposite way: the higher charge density, the lower the toxicity. The effect of the pH on hemolysis has been evaluated in detail. The aquatic toxicity was established using Daphnia magna . All surfactants yielded EC(50) values considerably higher than that reported for cationic surfactants based on quaternary ammonium groups. Finally, their biodegradability was evaluated using the CO(2) headspace test (ISO 14593). These lysine derivatives showed high levels of biodegradation under aerobic conditions and can be classified as "readily biodegradable compounds".     

Photophysical behaviour of 2-(dimethylamino)-fluorene in organised assemblies

The effects of cyclodextrins and TX-100 micelles on the fluorescent properties of 2-(dimethylamino)-fluorene (DAF) were studied. The photophysical properties of DAF in the micelle aggregates and cyclodextrins were used to explain how the cavity might affect the dynamics of intramolecular charge transfer and the twisting of the molecule. Results obtained show that α-, β- and γ-cyclodextrins interact in a different way with DAF and different values of quantum yield, lifetimes and absorption and emission wavelength were obtained. Because a small interior cavity size, α-cyclodextrin do not show interaction with DAF. Quenching studies demonstrated that in Triton X-100 micelles, DAF molecules migrated to the non polar region.     

Organocatalytic kinetic resolution cascade reactions: new mechanistic and stereochemical manifold in diphenyl prolinol silyl ether catalysis

A new cascade reaction involving an iminium-catalyzed intramolecular oxa-Michael addition followed by an enamine-catalyzed intermolecular Michael addition is reported herein. This cascade reaction generates enantiopure, highly functionalized tetrahydropyrans and tetrahydrofurans in a one-pot reaction and in up to 89?% combined yield and up to 99?% ee. This cascade reaction is catalyzed by diaryl prolinol silyl ethers, which are a privileged class of catalysts. The stereochemical outcome of these cascade reactions is unprecedented. Computational studies indicate that this stereochemical outcome arises from nonclassical hydrogen-bonding interactions between the electrophile and the substrate, and from entropic considerations of preorganization. The unprecedented configurations of the cascade products, combined with the computational models, reveal for the first time that asymmetric induction by diaryl prolinol silyl ether catalysts is not always exclusively reagent controlled. The stereochemical outcome also arises from a kinetic resolution or dynamic kinetic resolution of the β-stereocenter through an enamine-catalyzed intermolecular reaction. This unprecedented organocascade reaction mechanism may be adaptable to diaryl prolinol silyl ether-catalyzed cascade reactions, in which both the iminium- and enamine-catalyzed steps are intermolecular, an underdeveloped type of cascade reaction.     

Time-dependent density functional theory studies of the photoswitching of the two-photon absorption spectra in stilbene, metacyclophenadiene, and diarylethene chromophores

Photochromophores such as cis-stilbene (1a), metacyclophenadiene (2a), and the diarylethene 3a undergo photoinduced conrotatory opening and closing of a central bond and are currently being sought out as potential candidates for media within 3D optical information storage devices. Strong molecular two-photon absorption (inducing the reversible photoisomerization) is a necessary feature for this application due to the need for high 3D spatial resolution. Here, the one- and two-photon absorption (OPA and TPA) characteristics of the open- and closed-ring isomers of 1-3 have been investigated using time-dependent density functional theory. It was determined that the excited states populated by two-photon absorption were nearly 1 eV higher in energy than the lowest energy excited state populated by one-photon absorption. The electronic structures of the TPA and OPA accessed states were then compared utilizing natural transition orbital analysis. There, it was found that states excited by OPA had pipi* character about the C-C framework associated with the bond formation/scission of the central C-C bond. In contrast, the states populated by TPA have pipi* character along the C-C skeletal periphery, including phenyl excitations. It is postulated that these differences in excited state electronic structure may lead to reaction pathways alternative to photoisomerization about the central C-C bond, impacting the utility of these compounds as 3D information storage media.