On the influence of fatty acid chain unsaturation on supramolecular gelation of aminocarbohydrate-based supra-amphiphiles

Supramolecular gels are soft materials formed mainly by low molecular weight units held together by intermolecular interactions. Stabilizing these kinds of materials is quite a challenge due to the influence of multiple factors interfering with the integrity of the supramolecular structure. In our previous studies, we have shown that the aminocarbohydrate meglumine (MEG) interacts with organic acids by ion-pairing leading to the formation of MEG–carboxylate adducts. These adducts undergo supramolecular polymerization by heat treatment, but the macromolecular assembly was stable for a short period due to hydrogen bond (H-bond) breakup. Herein, we attempt to study the influence of hydrophobic building blocks on the formation of these compounds aiming to stabilize H-bonds to produce polymerizable supra-amphiphiles in water. Oleic acid and stearic acid are two analogous fatty acids differing only in the presence of unsaturation that were used in our studies. Results demonstrated that the presence of unsaturation hinders gelation in water by interfering with the self-assembly behavior of supra-amphiphiles. Thus, unsaturated supra-amphiphiles behave like traditional surfactants and gelify water at high concentrations (above 30% w/w). On the other hand, supramolecular gels with a polymer-like behavior could be produced with a saturated supra-amphiphile in water (above 4% w/w). The material was characterized by a lamellar arrangement that facilitates the alignment of H-bonds necessary to stabilize the self-assembled structure. These results have pivotal importance on the design of polymerizable supra-amphiphiles and demonstrate that the double bond of hydrophobic building blocks is an important design factor to be considered by scientists studying similar materials.     

Electron transfer and electrocatalytic properties of the immobilized methionine80alanine cytochrome c variant

The M80A variant of yeast iso-1-cytochrome c (cytc), which features a noncoordinating Ala residue in place of the axial heme iron Met ligand, was chemisorbed on a gold electrode coated with 4-mercaptopyridine or carboxyalkanethiol self-assembled monolayers (SAM) and investigated by cyclic voltammetry at varying conditions of temperature, pH, and O2 concentration. The E degrees ' value (standard reduction potential for the heme Fe(III)/Fe(II) couple) of M80A cytc on both SAMs is of approximately -200 mV (vs the standard hydrogen electrode, SHE) at pH 7, which is more than 400 mV lower than that of native cytochrome c in the same conditions. The thermodynamics of Fe(III) to Fe(II) reduction and the kinetics of heterogeneous electron transfer (ET) are dominated by the presence of a hydroxide ion as the sixth axial heme iron ligand above pH 6. On both SAMs, protonation of the bound hydroxide ion is mainly responsible for the changes in these parameters at low pH, since the distances of ET between the heme and the electrode are found to be independent of pH in the range of 5-11. The invariance of the electrochemical features up to pH 11 indicates that no changes in heme iron coordination occur at high pH, at variance with native cytc. Most notably, immobilized M80A cytc is found to act as an efficient biocatalyst for O2 reduction from pH 5 to 11.0. This finding makes M80A cytc a suitable candidate as a constituent of a biocatalytic interface for O2 biosensing and opens the way for the exploitation of engineered cytochrome c in the bio-based detection of chemicals of environmental and clinical interest.     

Differential amperometric determination of hydrogen peroxide in honeys using flow-injection analysis with enzymatic reactor

Hydrogen peroxide (H2O2) present in honey was rapidly determined by the differential amperometric method in association with flow-injection analysis (FIA) and a tubular reactor containing immobilized enzymes. A gold electrode modified by electrochemical deposition of platinum was employed as working electrode. Hydrogen peroxide was quantified in 14 samples of Brazilian commercial honeys using amperometric differential measurements at +0.60V vs. Ag/AgCl((sat)). For the enzymatic consumption of H2O2, a tubular reactor containing immobilized peroxidase was constructed using an immobilization of enzymes on Amberlite IRA-743 resin. The linear dynamic range in H2O2 extends from 1 to 100 x 10(-6) mol L(-1), at pH 7.0. At flow rate of 2.0 mL min(-1) and injecting 150 microL sample volumes, the sampling frequency of the 90 determinations per hour is afforded. This method is based on three steps involving the flow-injection of: (1) the sample spiked with a standard solution, (2) the pure sample and (3) the enzymatically treated sample with peroxidase immobilized. The reproducibility of the current peaks for hydrogen peroxide in 10(-5) mol L(-1) range concentration showed a relative standard deviation (R.S.D.) better than 1%. The detection limit of this method is 2.9 x 10(-7) mol L(-1). The honey samples analyses were compared with the parallel spectrophotometric determination, and showed an excellent correlation between the methods.     

Semi-empirical topological index: development of QSPR/QSRR and optimization for alkylbenzenes

The semi-empirical topological index, I(ET), was developed and optimized to describe the chromatographic retention of alkylbenzenes on the squalane stationary phase. The simple linear regression between the chromatographic retention and the proposed index, for 122 alkylbenzenes studied, is of good quality (determination coefficient, r(2)=0.9996, standard deviation, S.D.=5.5, and leave-one-out cross-validation correlation coefficient, r(CV)(2)=0.9996). The predictive ability of I(ET) was also verified for stationary phases with two different polarities (SE-30 and Carbowax 20 M), and good results were obtained, especially for the stationary phase with low polarity, showing that the specific molecular interactions occur on highly polar phases. The I(ET) was applied to construct quantitative structure-property relationship (QSPR) models for representative properties such as boiling point, Bp(degrees C), octanol/water partition coefficient, log P, van der Waals volume (V(W)) and molar refractivity (R(M)). Satisfactory quality QSPR models were obtained with Bp, V(W) and R(M) showing that the molecular size and dispersive forces are dominating factors with respect to the chromatographic retention.     

Semilinear elliptic equations and systems with diffuse measures

We study the equation −, where g(·, s) is finite outside sets of zero H ¹-capacity, , and μ is a diffuse measure. As an application, we provide a positive answer to a question of Lucio Boccardo concerning existence of solutions of an elliptic system with absorption.

A Lucio “Tu se’ lo mio maestro e ’l mio autore” (Dante, Inferno, I, 85)

     

Comparative analysis of the gas-phase reactions of cylindrospermopsin and the difference in the alkali metal cation mobility

Cylindrospermopsin (CYN) belongs to a group of toxins produced by several strains of freshwater cyanobacteria. It is a compact zwitterionic molecule composed of a uracil section and a tricyclic guanidinium portion with a primarily hepatotoxic effect. Using low multi-stage and high-resolution mass spectrometry, the gas-phase reactions of this toxin have been investigated. Our data show that collision-induced dissociation (CID) spectra of CYN are dominated by neutral losses, and three major initial fragmentation pathways are clearly distinguishable. Interestingly, comparative analysis of protonated and cationizated molecules showed a significant difference in the balance of the SO3 and terminal ring elimination. These data indicate that the differential ion mobility of H+, Li+, Na+ and K+ leads to different fragmentation pathways, giving rise to mass spectra with different profiles.     

Chemiexcitation Efficiency of Intermolecular Electron‐transfer Catalyzed Peroxide Decomposition Shows Low Sensitivity to Solvent‐cavity Effects

Intermolecular chemically initiated electron exchange luminescence (CIEEL) systems are known to possess low chemiluminescence efficiency; whereas, the corresponding intramolecular transformations are highly efficient. As the reasons for this discrepancy are not known, we report in this work our studies of the solvent‐cavity effect on the efficiency of two intermolecular CIEEL systems, the catalyzed decomposition of diphenoyl peroxide and of a relatively stable 1,2‐dioxetanone derivative, spiro‐adamantyl‐1,2‐dioxetanone. The results indicate a very low medium viscosity effect on the quantum yields of these systems, a priori not compatible with these bimolecular transformations, showing also that their low efficiency cannot be due to solvent‐cavity escape of intermediate radical ion pairs. In addition, the solvent‐cage effect on the CIEEL efficiency, after the occurrence of the initial electron transfer, proved also to be very low, indicating the intrinsic low viscosity effect on the chemiexcitation step. Therefore, it is concluded that the low efficiency of these systems is intrinsic to the chemiexcitation step and cannot be improved by medium viscosity effects, being possibly due to sterical hindrance on charge‐transfer complex formation in the initial step of the CIEEL.     

Detection of Isoforms Differing by a Single Charge Unit in Individual Cells

To measure protein isoforms in individual mammalian cells, we report single‐cell resolution isoelectric focusing (scIEF) and high‐selectivity immunoprobing. Microfluidic design and photoactivatable materials establish the tunable pH gradients required by IEF and precisely control the transport and handling of each 17‐pL cell lysate during analysis. The scIEF assay resolves protein isoforms with resolution down to a single‐charge unit, including both endogenous cytoplasmic and nuclear proteins from individual mammalian cells.     

Synthesis and micellar properties of surface-active ionic liquids: 1-alkyl-3-methylimidazolium chlorides

A series of surface-active ionic liquids, RMeImCl, has been synthesized by the reaction of purified 1-methylimidazole and 1-chloroalkanes, RCl, R=C(10),C(12),C(14), and C(16), respectively. Adsorption and aggregation of these surfactants in water have been studied by surface tension measurement. Additionally, solution conductivity, electromotive force, fluorescence quenching of micelle-solubilized pyrene, and static light scattering have been employed to investigate micelle formation. The following changes resulted from an increase in the length of R: an increase of micelle aggregation number; a decrease of: minimum area/surfactant molecule at solution/air interface; critical micelle concentration, and degree of counter-ion dissociation. Theoretically-calculated aggregation numbers and those based on quenching of pyrene are in good agreement. Gibbs free energies of adsorption at solution/air interface, DeltaG(ads)(0), and micelle formation in water, DeltaG(mic)(0), were calculated, and compared to those of three surfactant series, alkylpyridinium chlorides, RPyCl, alkylbenzyldimethylammonium chlorides, RBzMe(2)Cl, and benzyl(3-acylaminoethyl)dimethylammonium chlorides, R(')AEtBzMe(2)Cl, respectively. Contributions to the above-mentioned Gibbs free energies from surfactant methylene groups (in the hydrophobic tail) and the head-group were calculated. For RMeImCl, the former energy is similar to that of other cationic surfactants. The corresponding free energy contribution of the head-group to DeltaG(mic)(0) showed the following order: RPyCl approximately RBzMe(2)Cl>RMeImCl>R(')AEtBzMe(2)Cl. The head-groups of the first two surfactant series are more hydrophobic than the imidazolium ring of RMeImCl, this should favor their aggregation. Micellization of RMeImCl, however, is driven by a relatively strong hydrogen-bonding between the chloride ion and the hydrogens in the imidazolium ring, in particular the relatively acidic H2. This interaction more than compensates for the relative hydrophilic character of the diazolium ring. As indicated by the corresponding DeltaG(mic)(0), micellization of R(')AEtBzMe(2)Cl is more favorable than that of RMeImCl because the CONH group of the former surfactant series forms hydrogen bonds to both the counter-ion and the neighboring molecules in the micelle.