Human Serum Albumin−Gold Nanoparticle Based Impedimetric Sensor for Sensitive Detection of miRNA-200c

Here, human serum albumin conjugated gold nanoparticles (HSA−AuNPs) were synthesized by a simple route to develop an impedimetric sensor for miRNA-200c detection based on a selective oligo-hybridization process without any labeling. The synthetic DNA capture probe for miRNA-200c was decorated onto the HSA−AuNPs modified pencil graphite electrodes. Impedimetric signals were monitored after the hybridization process between the DNA probe and target miRNA-200c. HSA−AuNPs adsorption time, incubation time of the capture probe and hybridization time-temperature were optimized. The proposed miRNA-200c biosensor demonstrated proper sensitivity and selectivity, low detection limit (1.13 fM), good reproducibility and simple direct detection of miRNA-200c in serum.     

Selective syntheses of vinylenedithiathiophenes (VDTTs) and dithieno[2,3-b;2′,3′-d]thiophenes (DTTs); building blocks for π-conjugated systems

Selective syntheses of 3,4-vinylenedithiathiophenes (VDTTs) and dithieno[2,3-b;2′,3′-d]thiophenes (DTTs), having Ph, 4-CH₃OC₆H₄, 4-BrC₆H₄, 4-NO₂C₆H₄ and 4-(CH₃)₂NC₆H₄ groups, were achieved through the reaction of 1,8-diketone with phosphorus decasulfide (P₄S₁₀). The reaction could be shifted between VDTT and DTT by adding base (sodium bicarbonate) or acid (para-toluenesulfonic acid), respectively, to the reaction mixture. While the VDTTs were obtained in moderate yields, an important achievement has been made with the syntheses of the DTTs, obtaining them in higher yields compared with the previous report. Polymers of the VDTTs, which are the analogues of ethylenedioxythiophene, EDOT, were prepared using FeCl₃. Unfortunately, all attempts for their electropolymerization failed. Spin density calculations revealed that none of the VDTTs had a significant positive spin density at the ‘α’ carbon atoms of the thiophene ring. Considering their solubility and functional groups, which could be further derivatized, they are useful building blocks for the preparation of new organic materials.     

Release Profiles of Tricalcium Phosphate Nanoparticles from Poly(L‐lactic acid) Electrospun Scaffolds with Single Component,Core–Sheath,or Porous Fiber Morphologies: Effects on hASC Viability and Osteogenic Differentiation

Functional PLA scaffolds are created with single component, core–sheath, or porous fiber morphology and doped with TCP nanoparticles to study the release profiles for use in bone tissue engineering applications. Pharmacokinetic analyses are performed for the three different nanofibrous structures after doping with TCP. Results indicate that single component and porous fiber scaffolds exhibit an initial‐burst release profile whereas core–sheath fibers show a steady release. All scaffolds are then seeded with human adipose‐derived stem cells (hASC), which remain viable and continue proliferation on all nanofibrous morphologies for up to 21 d. Osteogenic differentiation of hASC and cell‐mediated calcium accretion are largest on porous fibers.

     

Dispersions of nanocrystalline cellulose in aqueous polymer solutions: structure formation of colloidal rods

The steady-state shear and linear viscoelastic deformations of semidilute suspensions of rod-shaped nanocrystalline cellulose (NCC) particles in 1.0% hydroxyethyl cellulose and carboxymethyl cellulose solutions were investigated. Addition of NCC at the onset of semidilute suspension concentration significantly altered the rheological and linear viscoelastic properties of semidilute polymer solutions. The low-shear viscosity values of polymers solutions were increased 20-490 times (depending on polymer molecular weight and functional groups) by the presence of NCC. NCC suspensions in polymer solutions exhibited yield stresses up to 7.12 Pa. Viscoelasticity measurements also showed that NCC suspended polymer solutions had higher linear elastic moduli than the loss moduli. All of those results revealed the gel formation of NCC particles and presence of internal structures. The formation of a weak gel structure was due to the nonadsorbing macromolecules which caused the depletion-induced interaction among NCC particles. A simple interaction energy model was used to show successfully the flocculation of NCC particles in the presence of nonadsorbing polymers. The model is based on the incorporation of the depletion interaction term between two parallel plates into the DLVO theory for cubic prismatic rod shaped NCC particles.     

Wavelength and coherence effects on the growth mechanism of silicon nanopillars and their use in the modification of spontaneous lifetime emission of BODIPY dye molecules

Silicon nanopillars are grown by an electrochemical anodization of p-type silicon wafers at low current densities in a hydrofluoric acid solution. CW, white light, and various UV pulsed lasers are employed as illumination sources in sample preparation to study wavelength and coherence effects on the growth mechanism of the nanopillars. Coherence is observed to be the foundation of regularity in obtaining conical shapes. The pillar size is found to be almost linearly proportional to the employed illumination wavelength during their growth. BODIPY dye molecules are chemically attached to these silicon nanopillars and the radiative decay rates are investigated by means of a time-resolved fluorescence experiment. The decay rate of the dye molecules embedded in the vicinity of various size pillar tips is significantly affected due to different apex angles of the conical nature. It is demonstrated that the pillar size and the separation between pillars can be adjusted if one uses a coherent light source with an appropriate wavelength during the course of fabrication process. Since change in the decay rate is due to tips of the pillars only, separation of a few micrometers between pillar tips allows one to directly monitor a dye, which is embedded to the tip of a single nanopillar, via a confocal microscopic method for the spontaneous lifetime measurements, without having needed to any extra efforts for an in situ imaging process. It is observed that as the pillar size gets smaller, the inhibition in the spontaneous lifetime of BODIPY is more pronounced. In addition, a more regular pillar structure yields nonvarying decay rates of the dye molecules throughout the silicon sample.     

Use of atomic absorption spectrometry in assessment of biomonitor plants for lead, cadmium and copper pollution

Eleven plant species were collected from the vicinity of lead-battery plant in the city of Gaziantep,Turkey.Lead,cadmium and copper concentrations in the soil and leaves of plants were determined by atomic absorption spectrometry.Lead,Cd and Cu concentrations in the soil samples taken from battery area were found to be in the ranges of 304～602,0.4～0.44 and 31～37 mg·kg-1,respectively.Significantly increased lead concentration up to 2 750 mg·kg-1 was found in the leaves of Eleagnus angustifolia L.plant.The lead concentrations in the other plant leaves taken from 50 m around battery factory followed the order Ailanthus altissima>Morus sp.>Juglans regia L.>Ficus carica L.>Cydonia oblonga Miller>Prunus x domestica L.The plants,Populus nigra L.,Eleagnus angustifolia L.and Salix sp.were found useful for Cd,and the plant,Eleagnus angustifolia L.for Pb,to be considered as potential biomonitor.Especially,leaves of trees and plants taken from the distance of 50 m from battery plant have relatively higher Pb concentrations.Therefore,people who and animals which live in this area and benefit from these soil and plants have vital risks.     

Plasma treatment of polypropylene fabric for improved dyeability with soluble textile dyestuff

The impact of plasma treatment parameters on the surface morphology, physical-chemical, and dyeing properties of polypropylene (PP) using anionic and cationic dyestuffs were investigated in this study. Argon plasma treatment was used to activate PP fabric surfaces. Activated surfaces were grafted different compounds: 6-aminohexanoic acid (6-AHA), acrylic acid (AA), ethylendiamine (EDA), acryl amide (AAMID) and hexamethyldisiloxane (HMDS). Compounds were applied after the plasma treatment and the acid and basic dyeing result that was then observed, were quite encouraging in certain conditions. The possible formed oxidizing groups were emphasized by FTIR and ATR and the surface morphology of plasma treated PP fibers was also investigated with scanning electron microscopy (SEM).PP fabric could be dyed with acid and basic dyestuffs after only plasma treatment and plasma induced grafting, and fastnesses of the dyed samples were satisfactory.     

Determination of some trace elements by flame atomic absorption spectrometry after preconcentration and separation by Escherichia coli immobilized on multiwalled carbon nanotubes

We have immobilized living and non-living Escherichia coli (E. coli) bacteria on multiwalled carbon nanotubes (MWCNT) and used such materials as a biosorbent for the separation and preconcentration of copper, cobalt, cadmium and nickel prior to their determination by flame atomic absorption spectrometry (FAAS). E. coli bacteria cells were mixed with MWCNTs in a 1:1 ratio, dried and placed at the tip of a 50-mL syringe. The ions were retained on the sorbent and then eluted by drawing and ejecting back the sample (or standard solution) and an eluent, respectively. The effects of various experimental parameters on the sorption and elution were investigated. The analytes were quantitatively retained (at pH values of 7) and eluted (with 0.5 M nitric acid) with high precision, the RSD being <5%. The performances of the new sorbents were compared using certified reference materials. The sorbent modified with living E. coli has a higher adsorption capacity and displays somewhat better recoveries compared to sorbent based on non-living E. coli. Both sorbents were successfully used for the separation and preconcentration of copper, cobalt, cadmium and nickel prior to their determination by flame atomic absorption spectrometry.

Oil Phase Solubility Rather Than Diffusivity Determines the Release of Entrapped Amino Acids and Di-Peptides from Water-in-Oil-in-Water Emulsions

The permeation of amino acids and di-peptides with different hydrophobicities across the oil phase in W/O/W double emulsions was investigated at different concentrations, considering the pH of the aqueous phase. Moreover, the particle size, yield of entrapped water and release kinetics of the double emulsions was evaluated as a function of time. Regarding the release of the entrapped amino acids and di-peptides, their hydrophobicity and the pH had a significant effect, whereas the concentration of the dissolved compound did not lead to different release kinetics. The release of the amino acids and di-peptides was faster at neutral pH as compared to acidic pH values due to the increased solute solubility in the oil phase for more hydrophobic molecules at neutral pH. Regarding the effect of the type of oil, much faster amino acid transport was observed through MCT oil as compared to LCT oil, which might be due to its higher solubility and/or higher diffusivity. As di-peptides released faster than amino acids, it follows that the increased solubility overruled the effect from the decreased diffusion coefficient of the dissolved compound in the oil phase.