Modification of WS2 nanosheets with beta-cyclodextrone and N-isopropylacrylamide polymers for tamoxifen adsorption and investigation of in vitro drug release

In this research, tungsten disulfide (WS₂) nanosheets were modified with beta-cyclodextrone (βCD) N-isopropylacrylamide polymers (NIPAAP) for adsorption of tamoxifen (TAM) drug. The synthesized WS₂/βCD/NIPAAP samples were characterized by field-emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and X-ray diffraction (XRD) analyses. The adsorption experiments of TAM on WS₂/βCD/NIPAAP were performed as a function of pH, reaction contact time, temperature and drug concentration. The adsorption kinetic data were well fitted to the pseudo-second-order model. Also, the equilibrium data were well described by Langmuir isotherm model. The maximum adsorption capacity of WS₂/βCD/NIPAAP for TAM drug was found to be 62.0 mg/g. The results of regeneration tests showed that the synthesized WS₂/βCD/NIPAAP adsorbent can be easily reused after 6 cycles of adsorption–desorption. Furthermore, TAM drug release was investigated in a simulated system with pH 7.4 at different temperatures. The results showed that the release of TAM drug from WS₂/βCD/NIPAAP carrier at 50 °C and 37 °C was greater than TAM release at 25 °C. Also, the experimental data of drug release were studied by Higuchi, Ritger-Peppas, zero-order and first-order models. The release data were well fitted to the zero-order model indicating a case II transport. The results showed a high stability for TAM drug.

     

Unique viscoelastic behaviors of colloidal nanocrystalline cellulose aqueous suspensions

Unique rheological and phase behaviors of rod-like nanocrystalline cellulose (NCC) suspensions in aqueous media are revealed in the present article. Specifically, the NCC aqueous suspension remained isotropic in a wide NCC concentration range in which the suspension underwent transition from dilute solution to gel, and the relative viscosity of the NCC suspension could be well fitted by the Sato-Teramoto theory in the full concentration range tested. Correspondingly, both zero-shear viscosity and complex viscosity increased monotonically with NCC concentration, and no maximum value was observed along the curves of zero-shear viscosity or complex viscosity versus NCC concentration, indicating a deviation from the lyotropic system. However, a shear-induced birefringence phenomenon was observed, indicating the NCC suspension formed a temporary ordered structure in the external force field but was unable to form an anisotropic (liquid crystalline) phase. The Cox-Merz rule was not applicable for the NCC suspension as a result of oriented domains, i.e., rod-like NCC particles. Moreover, time-concentration superposition was successfully applied to both the storage and loss modulus, attributed to the isotropic feature of the NCC suspension in the tested concentration range. The reason why this NCC suspension remained isotropic could be because of the strong electrostatic repulsions between NCC particles and the weak tendency or driving force of anisotropy formation as a result of the small aspect ratio of NCC particles, Na⁺ counterions and large amounts of negative charges along the NCC particles. The results suggested that not all the rod-like particles were able to form an anisotropic phase in aqueous suspension, but dominated by various factors.     

Detonation propagation across a stratified layer with a diffuse interface

A study was conducted to examine detonation propagation in a stratified layer of hydrogen-oxygen-nitrogen above an inert gas in a horizontal narrow channel. The stratified layer was produced by a gravity current, generated by retracting a door initially separating a hydrogen-oxygen-nitrogen mixture in the predetonator and a heavier inert gas in the test-section. A steady detonation wave generated in the predetonator was transmitted into the stratified layer. The reactivity of the predetonator mixture was varied via the hydrogen-oxygen equivalence ratio and the amount of nitrogen dilution. Schlieren photography was used to visualize the detonation front in the test-section, and soot foils were used to obtain the cellular structure. Schlieren imaging showed a curved detonation front that decoupled at about mid channel height, into a shock wave and trailing contact surface. Both the hydrogen-oxygen-nitrogen reactivity and the type of inert gas initially in the test-section affected the distance travelled by the detonation wave in the stratified layer. The mixture composition distribution within the test-section before ignition was obtained via a three-dimensional CFD simulation. The lateral extent of the cellular structure captured on the soot foil, coincided with the calculated inert gas mole fraction contour that corresponds to a sharp increase in the ZND induction zone length, e.g., 70% argon dilution for a stoichiometric hydrogen-oxygen predetonator mixture.     

High resolution electronic absorption and extinction coefficients of the allyl radical

Electronic absorption spectra in the 210-250 nm region, were reported for the allyl radical in the vapor phase and subsequent reactions have been investigated by kinetic spectroscopy and gas-liquid chromatography. Extinction coefficients are calculated for the strong absorption bands of the allyl free radical by measured rate constants at room temperature.     

Identification of Chemical Forms of Lead, Cadmium and Nickel in Sewage Sludge of Waste Water Treatment Facilities

 Lead, cadmium and nickel levels in sewage sludge of a waste water treatment facility were determined by slotted tube atom trap (STAT)-flame atomic absorption spectrometry after using different extraction reagents. In addition, a sequential extraction procedure was applied to the same samples and the results were compared. It was found that Pb and Cd were relatively mobile as organically bound, carbonate or adsorbed on the Fe–Mn oxides and the concentrations in the extracts were higher than 50%. However, the percentage of Ni bound to these phases was found to be very low. Received October 23, 2001; accepted August 2, 2002     

Synthesis and Optical Characterization of Red-Emitting BaTa<Subscript>2</Subscript>O<Subscript>6</Subscript>:Eu<Superscript>3+</Superscript> Phosphors

Undoped and Eu³⁺ doped BaTa₂O₆ phosphors were synthesized via solid state reaction method and characterized by using XRD, SEM-EDS and photoluminescence (PL) analyses. The XRD results revealed that the crystal structure of BaTa₂O₆ allowed up to 10 mol% levels of Eu³⁺ ions due to the TTB characteristic network of adjacent octahedrals. SEM-EDS analyses confirmed the formation of BaTa₂O₆ structure and EuTaO₄ secondary phase. BaTa₂O_6:Eu³⁺ phosphors exhibited orange and red emissions at 592.2 nm and 615.7 nm in the visible region respectively. The Commission Internationale d’Eclairage (CIE) chromaticity coordinates of the BaTa₂O_6:Eu³⁺ phosphors that excited at λ _ex = 400 nm ranged from orangish-red to pinkish-red depending on increasing Eu³⁺ concentration.     

Crystallization studies of poly(trimethylene terephthalate) using thermal analysis and far‐infrared spectroscopy

Crystallization of poly(trimethylene terephthalate) (PTT) by annealing was examined using density measurement, differential scanning calorimetry, and far‐infrared spectroscopy (FIR). Crystallinity, measured by density, increased slowly up to the T_a of 185 °C and increases rapidly once T_a exceeds 185 °C. It was found that thermally induced crystallization is mainly temperature‐dependent above T_a = 185 °C and temperature‐ and time‐dependent below T_a = 60 °C. Two melting transitions, T and T, were observed for those samples annealed above 120 °C. No significant change in T was observed as a function of T_a while T showed strong dependency on T_a. Digital subtraction of the amorphous contribution from the semicrystalline FIR spectra provided characteristic spectra of amorphous and crystalline PTT. The bands at 373, 282, and 92 cm^?1 were assigned to the crystalline phase, while the bands at 525, 406, and 351 cm^?1 were attributed to the amorphous phase. It was shown that FIR spectroscopy can be used as a means to estimate the degree of crystallinity of PTT. The band ratio of 373 and 501 cm^?1 was plotted against crystallinity measured by density and reasonably good correlation was obtained. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1675–1682, 2007     

Online preconcentration for the determination of lead, cadmium and copper by slotted tube atom trap (STAT)-flame atomic absorption spectrometry

An online sensitivity enhancement by using atom trapping in flame atomic absorption spectrophotometry was examined for increasing the residence time of the analyte atoms in the light path. For this purpose, various parameters of quartz tubes of the slotted tube atom trap were tested. The studied parameters include the internal diameter, the length of the upper slot and the wall thickness of quartz tube. The best sensitivities as high as 7-fold, 13-fold and 3-fold enhancement were achieved by the tubes having an internal diameter of 6 mm, an upper slot length of 1.0 cm and the wall thickness of 1.5 mm for lead, cadmium and copper, respectively. The limits of quantitation were found to be 30 ng mL(-1) for Pb and 3 ng mL(-1) for Cd and 30 ng mL(-1) for Cu by the optimized method. The achieved technique was applied to determine the concentrations of Pb, Cd and Cu in different plant leaves taken around cement and textile industries.