Adsorption of N-Nitrosodiethylamine and N-Nitrosodimethylamine on Activated Carbon: A Pre-Concentration Procedure for Gas Chromatographic Analysis

In this study, a rapid pre-concentration procedure, which employs powdered activated carbon as a clean-up and pre-concentration material, is described for the gas chromatographic analysis of N-nitrosodiethylamine (NDEA) and N-nitrosodimethylamine (NDMA) in aqueous solutions. It was found that powdered activated carbon is suitable for the adsorption of volatile N-nitrosamine compounds from aqueous solutions. Adsorption efficiency with spiked beer samples (alcohol content 5% v/v) was found to be 80.5% (NDMA) and 89.4% (NDEA) and recovery of extraction from activated carbon was calculated as 82.1% (NDMA) and 89.7% (NDEA), respectively. The effect of 100µgmL^–1 of tannic acid on the adsorption was also studied, and no significant effect on the adsorption and extraction of volatile N-nitrosamine compounds was found.     

Metallophthalocyanines with rod-shaped substituents

4-(4′-Dioctylaminocarbonylbiphenyloxy) phthalonitrile was synthesized from 4-(4′-carboxybiphenyloxy)phthalonitrile and dioctylamine in the presence of Et₃N. Metallophthalocyanines (Zn, Co and Cu) substituted with four dioctylaminocarbonyl biphenyloxy groups on the peripheral positions were prepared from 4-(4′-dioctylaminocarbonylbiphenyloxy)phthalonitrile and the corresponding divalent metal salts (Zn(CH₃COO)₂, CoCl₂ and CuCl₂). The new phthalocyanines are soluble in common organic solvents. These compounds were characterised by ¹H-NMR, ¹³C-NMR, FT-IR, UV-Vis and mass spectroscopies.     

The synthesis and characterization of a new (<Emphasis Type="Italic">E,E</Emphasis>)-dioxime containing 13-membered dithiadiazamacrocyclic moieties and its mononuclear complexes

A new (E,E)-dioxime, (6Z,7Z)-15,16-dihydro-14H-dibenzo[b,h][1,10,4, 7]dithiadiazacyclotride-cine-6,7(5H,8H)-dionedioxime (H ₂ L) has been synthesized by reacting cyanogen-di-N-oxide (2) with 2,2′-[propane-1,3-diylbis(thio)]dianiline (1). Mononuclear complexes (4) and (5) of this ligand have been synthesized by reacting the vic-dioxime (H₂L) with NiCl₂ · 6H₂O and CoCl₂ · 6H₂O, respectively. The BF ₂ ⁺ capped Ni(II) and Co(III) complexes (6) and (7) of the dioxime have been synthesized from (4) and (5). The new compounds were characterized by a combination of elemental analysis, ¹H- and ¹³C-n.m.r, i.r. and m.s. spectral data.     

Synthesis and structural studies of (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}pyridin-2-yl)imino]butan-2-one oxime, ligand and its mono-, di- and trinuclear copper(II) complexes

A new dioxime ligand, (2E,3E)-3-[(6-{[(1E,2E)-2-(hydroxyimino)-1-methylpropylidene]amino}-pyridin-2-yl)imino]butan-2-one oxime, (H₂Pymdo) (3) has been synthesized in H₂O by reacting 2,3-butenedione monoxime (2) with 2,6-diaminopyridine. Mono-, di- and tri-nuclear copper(II) complexes of the dioxime ligand (H₂Pymdo) and/or 1,10-phenanthroline have been prepared. The dioxime ligand (H₂Pymdo) and its copper(II) complexes were characterized by ¹H-n.m.r., ¹³C-n.m.r. and elemental analyses, magnetic moments, i.r. and mass spectral studies. The mononuclear copper(II) complex of H₂Pymdo was found to have a 1:1 metal:ligand ratio. Elemental analyses, stoichiometric and spectroscopic data of the metal complexes indicated that the metal ions are coordinated to the oxime and imine nitrogen atoms (C=N). In the dinuclear complexes, in which the first Cu(II) ion was complexed with nitrogen atoms of the oxime and imine groups, the second Cu(II) ion is ligated with dianionic oxygen atoms of the oxime groups and are linked to the 1,10-phenanthroline nitrogen atoms. The trinuclear copper(II) complex (6) was formed by coordination of the third Cu(II) ion with dianionic oxygen atoms of each of two molecules of the mononuclear copper(II) complexes. The data support the proposed structure of H₂Pymdo and its Cu(II) complexes.     

Synthesis of N-(4′-Benzo[15-crown-5])biphenylaminoglyoxime and Its Complexes with Some Transition Metals

N-(4-Benzo[15-crown-5])biphenylaminoglyoxime (H₂L) and sodium chloride salt of N-(4-benzo[15-crown-5])biphenylaminoglyoxime (H₂L · NaCl) have been prepared from 4-biphenylchloroglyoxime, 4-aminobenzo[15-crown-5], and sodium bicarbonate and sodium chloride. Nickel(II), cobalt(II), and copper(II) complexes with H₂L and H₂L · NaCl have a metal–ligand ratio of 1 : 2 and the ligand coordinates through the two N atoms, as do most of the vic-dioximes. Their IR spectra and elemental analyses are given, together with ¹H NMR spectra of the ligands.     

Metal-Containing Phthalocyanines Substituted with One Branched Bulky Moiety and Six Alkylthio Groups

Summary.  Unsymmetrically substituted metal-phthalocyanines composed of three hexylthio groups and one 1-chloro-3,4-dicyano-6-[2-(2-pyridylmethylamino)phenylthio]benzene moiety was prepared by cyclization of the reactants in the presence of the anhydrous metal salts Zn(CH₃COO)₂, NiCl₂, and CoCl₂. The new unsymmetric phthalocyanines are very soluble in common organic solvents. The compounds were characterised by their elemental analyses, IR, ¹H NMR, MS and UV/Vis spectra. Corresponding author. E-mail: bayir@itu.edu.tr Received November 27, 2002; accepted (revised) December 2, 2002 Published online May 2, 2003     

A novel (E,E)-dioxime and its mono-, di- and trinuclear complexes bearing tetradentate octyl sulfanyl phenylamino substituents. Synthesis,characterization and electrochemical properties of its transition metal complexes

A new vic-dioxime, 13,14-bis-(hydroxyimino)-9,12,15,18-diazadithiaoctacosane, has been synthesized from 2-octylsulfanylaminobenzene and (E,E)-dichloroglyoxime. Mononuclear transition metal complexes of Ni^II, Cu^II, Co^II and Fe^II have been prepared and were found to have a metal–ligand ratio of 1:2. The synthesis of di- and trinuclear complexes was achieved with U^IVO₂ and Cu^II depending on the stoichiometry of the reactants. The complexes were characterized by elemental analysis, ¹H-n.m.r., u.v.–vis, i.r., f.a.b.-m.s. and by cyclic voltammetry.     

Preparation and characterization of Co(II), Ni(II) and Cu(II) complexes of a ligand containing 1,3,4-thiadiazole groups

(1R,2R)-1,2-bis-(5-amino-1,3,4-thiadiazole-2-yl)ethane-1,2-diol (L) has been prepared by the reaction of thiosemicarbazide with (2R,3R)-(+)-tartaric acid (I) and phosphorous oxychloride, and its complexes with Co(II), Ni(II) and Cu(II) have been obtained. The structures of the ligand and its complexes have been established by i. r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis–nir spectroscopy, elemental analyses, T.g.-D.t.a. and magnetic susceptibility measurements.     

Phenolic compounds from the aerial parts of Clematis viticella L. and their in vitro anti-inflammatory activities*

Phytochemical investigations on the EtOH extract of Clematis viticella led to the isolation of six flavonoid glycosides, isoorientin (1), isoorientin 3′-O-methyl ether (2), quercetin 7-O-α-L-rhamnopyranoside (3), quercetin 3,7-di-O-α-L-rhamnopyranoside (4), manghaslin (5) and chrysoeriol 7-O-β-D-glucopyranoside (6), one phenylethanol derivative, hydroxytyrosol (7), along with three phenolic acids, caffeic acid (8), (E)-p-coumaric acid (9) and p-hydroxybenzoic acid (10). The structures of the isolates were elucidated on the basis of NMR and HR-MS data. All compounds were isolated from C. viticella for the first time. Compounds 7 and 8 showed significant anti-inflammatory activity at 100 μM by reducing the release of NO in LPS-stimulated macrophages comparable to positive control indomethacin. Compounds 3 and 7 exhibited anti-inflammatory activity through lowering the levels of TNF-α while 1, 3 and 5 decreased the levels of neopterin better than the positive controls.     

The use of Agrobacterium tumefacients immobilized on Amberlite XAD-4 as a new biosorbent for the column preconcentration of iron(III), cobalt(II), manganese(II) and chromium(III)

A microorganism Agrobacterium tumefacients as an immobilized cell on a solid support was presented as a new biosorbent for the enrichment of Fe(III), Co(II), Mn(II) and Cr(III) prior to flame atomic absorption spectrometric analysis. Amberlite XAD-4 was used as a support material for column preconcentration. Various parameters such as pH, amount of adsorbent, eluent type and volume, flow rate of sample solution, volume of sample solution and matrix interference effect on the retention of the metal ions have been studied. The optimum pH for the sorption of above mentioned metal ions were about 6, 8, 8 and 6, respectively. The loading capacity of adsorbent for Co(II) and Mn(II) were found to be 29 and 22 μmol g⁻¹, respectively. The recoveries of Fe(III), Co(II), Mn(II) and Cr(III), under the optimum conditions were found to be 99 ± 3, 99 ± 2, 98 ± 3 and 98 ± 3%, respectively, at the 95% confidence level. The limit of detection was 3.6, 3.0, 2.8 and 3.6 ng ml⁻¹ for Fe(III), Co(II), Mn(II) and Cr (III), respectively, by applying a preconcentration factor of 25. The proposed enrichment method was applied for metal ion determination from water samples, alloy samples, infant foods and certified samples such as whey powder (IAEA-155) and aluminum alloy (NBS SRM 85b). The analytes were determined with a relative error lower than 10% in all samples.