A new class of oxo-bridged high-valent hexamanganese clusters supported by sterically hindered carboxylate ligands

A new class of oxo-bridged high-valent hexamanganese (Mn6) clusters containing a novel (Mn6O8)6+ core, [MnIV(4)MnIII2(mu-O)4(mu3-O)4(dmb)6(O2CR)2]4+ (where dmb=4,4'-dimethyl-2,2'-bipyridine, and RCO2=2,6-di(p-tolyl)benzoate (Ar(Tol)CO2-) (3) or 2,6-di(4-tert-butylphenyl)benzoate (Ar(4-tBuPh)CO2-) (4)), was synthesized using sterically hindered m-terphenyl-derived carboxylate ligands. These complexes can be synthesized by oxidizing the MnII mononuclear complexes, [Mn(dmb)2(OH2)(O2CR)]+ (where RCO2=Ar(Tol)CO2- (1) or Ar(4-tBuPh)CO2- (2)) with (n-Bu4N)MnO4, by direct Mn(II) + Mn(VII) in situ comproportionation reactions, or by ligand substitution on the dinuclear manganese (III,IV) or (IV,IV) complexes, [(Mn2(mu-O)2(dmb)4)](3+/4+). The compound [MnIV4MnIII2(mu-O)4(mu3-O)4(dmb)6(Ar(Tol)CO2)2](OTf)4 [3(OTf)4] crystallizes in the monoclinic space group P2(1)/n, with the cell parameters a=15.447(1) A, b=15.077(2) A, c=27.703(2) A, beta=91.68(2) degrees, V=6449.3(6) A3, and Z=2. The X-ray structure reveals that there are three different bridging modes for the oxo groups: mu, "pyramidal" mu3, and "T-shaped" mu3. Solid-state variable temperature magnetic susceptibility studies suggest that the Mn centers are net antiferromagnetically coupled to yield a diamagnetic ST=0 ground spin state with a large number of low-lying, thermally accessible states with ST>0. 1H NMR spectra were recorded for both Mn6 clusters and selected resonances assigned. The electronic and redox properties of these complexes along with the effect of the presence of the bulky carboxylate ligands are also described here.     

Littrow-type discretely tunable, Q-switched Nd:YAG laser around 1.3 μm

An all-solid-state, side diode array pulse pumped Nd:YAG laser tunable for six wavelengths ranging from 1318.8 nm to 1356.0 nm is developed. The tunability is obtained by using a grating in Littrow mode that also serves as an output coupler. The configuration ensures a line width as low as 0.04 nm. Thermal effects limit the maximum average power to 250 mW for an average absorbed pump power of 8.0 W in the free-running condition. An acousto-optic Q-switching of the laser provides pulses of width 251 ns with peak power of 733 W for an average pump power of 11.5 W. The laser may find application in microsurgery and dermatology. PACS 42.55.Xi; 42.60.-v; 42.60.Fc; 42.60.Gd; 42.62.Be     

A Rapid and Simple UPLC-MS–MS based Simultaneous Determination of the Medicinally Important E- and Z-Guggulsterone from Oleogum-Resins of Naturally Occurring Commiphora wightii Plants

A fast and simple method for simultaneous detection and quantification of the medicinally important E- and Z-guggulsterone from raw oleogum-resin of Commiphora wightii by UPLC was developed. Both E- and Z-guggulsterone were extracted from naturally occurring resin samples using ethyl acetate and methanol. Chromatographic separation of the analytes and their respective standards were performed on an Acquity UPLC BEH C₁₈ column followed by UV as well as a triple quadrupole detector in positive ionization mode. A linear gradient elution profile followed; mobile phase consisted of acetonitrile and 2 mM ammonium acetate in water. The method was validated over a range of 6.25 to 100 ng mL⁻¹ for both the guggulsterones. The calibration curves were linear with correlation coefficients of 0.9998 for E-guggulsterone and 0.9999 for Z-guggulsterone. The LOD and LOQ were 1.65 and 5.02 ng mL⁻¹ for E-guggulsterone and 2.57 and 7.79 ng mL⁻¹ for Z-guggulsterone respectively. The average recovery of E-guggulsterone (104.63%) and Z-guggulsterone (104.33%) achieved from spiked samples were consistent and reproducible. The intra- and inter-day assay precision of the analytes over the entire concentration range was less than 2%. The developed method required only 6 min to complete a run including 1 min to equilibrate the system and hence suitable for high throughput applications. Efficiency, reliability and accuracy of the developed method were evaluated by analyzing resin sample from different C. wightii populations. The result of this study offers improvement in terms of speed and sensitivity as compared to previously reported methods.

     

Papier

Ohne Zusammenfassung     

Numerical study of concentrated fluid–particle suspension flow in a wavy channel

The particle migration effects and fluid–particle interactions occurring in the flow of highly concentrated fluid–particle suspension in a spatially modulated channel have been investigated numerically using a finite volume method. The mathematical model is based on the momentum and continuity equations for the suspension flow and a constitutive equation accounting for the effects of shear‐induced particle migration in concentrated suspensions. The model couples a Newtonian stress/shear rate relationship with a shear‐induced migration model of the suspended particles in which the local effective viscosity is dependent on the local volume fraction of solids. The numerical procedure employs finite volume method and the formulation is based on diffuse‐flux model. Semi‐implicit method for pressure linked equations has been used to solve the resulting governing equations along with appropriate boundary conditions. The numerical results are validated with the analytical expressions for concentrated suspension flow in a plane channel. The results demonstrate strong particle migration towards the centre of the channel and an increasing blunting of velocity profiles with increase in initial particle concentration. In the case of a stenosed channel, the particle concentration is lowest at the site of maximum constriction, whereas a strong accumulation of particles is observed in the recirculation zone downstream of the stenosis. The numerical procedure applied to investigate the effects of concentrated suspension flow in a wavy passage shows that the solid particles migrate from regions of high shear rate to low shear rate with low velocities and this phenomenon is strongly influenced by Reynolds numbers and initial particle concentration. Copyright © 2008 John Wiley & Sons, Ltd.     

A new multi-objective genetic algorithm applied to hot-rolling process

A new genetic algorithms based multi-objective optimization algorithm (NMGA) has been developed during study. It works on a neighborhood concept in the functional space, utilizes the ideas on weak dominance and ranking and uses its own procedures for population sizing. The algorithm was successfully tested with some standard test functions, and when applied to a real-life data of the hot-rolling campaign of an integrated steel plant, it outperformed another recently developed multi-objective evolutionary algorithm.     

Cascade synthesis of selective dihydro pyridazino fused acridinone derivatives via MCM-41 catalyzed ring-opening/ring-closure reaction

An enhanced one-pot synthesis of new functionalized 5,6-dihydro-5,5-dimethyl-2-phenyl-2H-pyridazino[3,4,5-kl]acridin-1(4H)-one derivatives with different substituted patterns by using mesoporous MCM-41 catalyst via a ring opening/ring closure reaction process has been established. This MCM-41 silica catalyst has been synthesized and characterized using an array of sophisticated analytical techniques like BET, XRD, UHRTEM, etc. This reaction could be conducted from inexpensive substrates within short period under neat reflux conditions. Compared with the usual methods, the remarkable advantages of this method are milder reaction conditions, operational simplicity, higher yields, short reaction times and an environmentally friendly procedure.     

A facile and versatile protocol for the one-pot PhI(OAc)2 mediated divergent synthesis of quinazolines from 2-aminobenzylamine

In this present work iodobenzenediacetate (PIDA) has been found to be the key reagent in absence or presence of catalytic amount of molecular iodine (I₂)/zinc chloride (ZnCl₂) to construct quinazoline scaffold from 2-aminobenzylamine and a variety of easily available aldehydes, aryl and aliphatic amines, aliphatic and aryl alcohols and nitriles. This protocol provides mild and robust conditions along with great versatility to synthesize 2-substituted quinazolines from diverse starting materials in good to excellent yields. The developed protocol is also well applicable to reactants containing ease to oxidation prone functional groups.     

Extraction of uranium(VI) by tri iso-amyl phosphate (TiAP) in ionic liquids

Batch extraction of uranium(VI) from uranyl nitrate solutions using TiAP in ionic liquids ([BMIM]PF₆ and [HMIM]PF₆) is studied. Effects of acidity, TiAP concentration in ionic liquid and temperature on distribution coefficient are studied. Results show that distribution coefficient increases with an increase in acidity and reduces with an increase in the alkyl chain length of the cation of the ionic liquid. Extraction of uranium(VI) by TiAP-[HMIM]PF₆ system is found to involve two molecules of the extractant per metal ion and extraction is found to change from being exothermic to endothermic as the percentage of the extractant is increased.