Structural,optical, and nonlinear optical properties of indium nanoparticles prepared by laser ablation

A study of indium nanoparticles prepared by two laser ablation techniques is reported. The suspensions of indium nanoparticles were prepared using the laser ablation of bulk indium in liquids. The prepared suspensions of indium nanoparticles were analyzed by the X-ray fluorescence spectroscopy and absorption spectroscopy. The position of the surface plasmon resonance of In-containing suspensions (350 nm) was consistent with the estimations taking into account the average size of In nanoparticles (43 nm) measured using the X-ray fluorescence spectroscopy. The nonlinear optical parameters of indium nanoparticles-containing liquids were studied by the z-scan technique using a picosecond Nd:YAG laser. We compare the laser ablation in liquids with the laser ablation of indium in vacuum at the tight and weak focusing conditions of a Ti:sapphire laser and analyze the 60 nm indium nanoparticles synthesized in the latter case. PACS 42.65.An; 42.65.Hw; 42.65.Jx; 61.46.Df; 78.67.Bf     

Bianchi Type-III Cosmological Models with Gravitational Constant G and the Cosmological Constant ∧

Einstein field equations with variable gravitational and cosmological constants are considered in the presence of perfect fluid for the Bianchi type-Ⅲ universe by assuming conservation law for the energy-momentum tensor. Exact solutions of the field equations are obtained by using the scalar of expansion proportional to the shear scalar θ∝σ, which leads to a relation between metric potential B = Cn, where n is a constant. The corresponding physical interpretation of the cosmological solutions are also discussed.     

Fabrication and electrochemical performance of La<Subscript>0.5</Subscript>Sr<Subscript>0.5</Subscript>CoO<Subscript>3</Subscript> impregnated porous YSZ cathode

La_0.5Sr_0.5CoO₃-yttria-stabilized zirconia (LSCO-YSZ) composite cathode for solid oxide fuel cell (SOFC) has been fabricated by wet impregnation method. Nitrate precursors of La, Sr, and Co have been impregnated into the pre-sintered porous YSZ matrix, which is converted into LSCO phase after calcination at 850 °C in the presence of glycine as confirmed from X-ray diffraction. LSCO of 5, 7, and 10 wt% impregnated porous YSZ have been electrochemically characterized using 2-probe AC conductivity method. Maximum ionic conductivity of 0.27 S/cm at 800 °C and activation energy of 0.15 eV between 600 and 800 °C have been observed for 10 wt% LSCO-YSZ cathode. Area-specific resistance of 1.01 Ω cm² at 800 °C is estimated for the electrolyte-supported half-cell (10 wt% LSCO-YSZ/YSZ). After testing the LSCO-YSZ cathode matrix, the electrolyte-supported full cell (10 wt% LSCO-YSZ/YSZ/NiO-YSZ) has been tested and produced maximum power density 51.12 mW/cm² (109.38 mA/cm²) at 800 °C. The electrolyte-supported full cell exhibited 6 Ω cm² electrode polarization at 800 °C in H₂, which is in higher side leading to low performance. LSCO-YSZ/YSZ/NiO-YSZ SOFC found to give stable performance up to 2 h and scanning electron microscopy analysis has been carried out before and after cell testing to assess the morphological changes.     

Simple algorithms for approximating all roots of a polynomial with real roots

We present a simple algorithm for approximating all roots of a polynomial p(x) when it has only real roots. The algorithm is based on some interesting properties of the polynomials appearing in the Extended Euclidean Scheme for p(x) and p′(x). For example, it turns out that these polynomials are orthogonal; as a consequence, we are able to limit the precision required by our algorithm in intermediate steps. A parallel implementation of this algorithm yields a P-uniform NC₂ circuit, and the bit complexity of its sequential implementation is within a polylog factor of the bit complexity of the best known algorithm for the problem.     

Intense two-cycle laser pulses induce time-dependent bond hardening in a polyatomic molecule

A time-dependent bond-hardening process is discovered in a polyatomic molecule (tetramethyl silane, TMS) using few-cycle pulses of intense 800 nm light. In conventional mass spectrometry, symmetrical molecules such as TMS do not exhibit a prominent molecular ion (TMS(+)) as unimolecular dissociation into [Si(CH(3))(3)](+) proceeds very fast. Under a strong field and few-cycle conditions, this dissociation channel is defeated by time-dependent bond hardening: a field-induced potential well is created in the TMS(+) potential energy curve that effectively traps a wave packet. The time dependence of this bond-hardening process is verified using longer-duration (≥100 fs) pulses; the relatively slower falloff of optical field in such pulses allows the initially trapped wave packet to leak out, thereby rendering TMS(+) unstable once again.     

Comprehensive studies on dielectric properties of p-methoxy benzylidene p-decyl aniline with function of temperature and frequency in planar geometry: A potential nematic liquid crystal for display devices

The dielectric properties of the nematic mesophase, p-methoxy benzylidene p-decyl aniline(MBDA), measured in planar geometry with a function of frequency and temperature are investigated in detail. The complex dielectric permittivity(ε' and ε') is also studied at a bias voltage of 10 V for planar aligned sample cell of nematic mesophase. The dielectric permittivity with bias voltage attains a higher( 2 times) value than that without bias voltage at a temperature of 56℃,which is due to the fact that the linking group of nematic molecules is internally interacted with an applied bias voltage.This is supported by observing an enhanced dielectric permittivity of nematic liquid crystal(LC) in the presence of bias voltage, which can be fully explained as the increasing of the corresponding dipole moment. The dielectric relaxation behaviors of nematic LC are also demonstrated for planar aligned sample cell. The remarkable results are observed that the relaxation frequency shifts into low frequency region with the increase of the bias voltage applied to the planar aligned sample cells. The dielectric relaxation spectra are fitted by Cole–Cole nonlinear curve fitting for nematic mesophase in order to determine the dielectric strength.     

Influence of sputtering pressure on the giant magnetoresistance and structure in Fe–Cu–Ni granular thin films

Composition, structure and giant magnetoresistance in Fe_xCu_yNi_z films prepared at different sputtering pressures were investigated. X-ray diffraction studies showed only Cu (1 1 1) peak from the Cu grain. The shifts in the d-spacing d₁₁₁ of Cu indicates a progressive substitution of Ni in the Cu lattice. Similar trends in d₁₁₁ of Cu observed for the samples prepared at different sputtering pressures indicate that the structural behaviour of the samples is nearly independent of the sputtering pressure. A significant enhancement of magnetoresistance (MR) for the samples sputtered at 0.001 mbar as compared to that sputtered at 0.02 mbar is attributed to the reduced role of residual gas impurities in the films upon lowering the sputtering pressure. An interesting observation is that the MR did not significantly decrease even with a large substitution of Ni in the Cu grains.     

Synchrotron μ‐XRF study on compositional uniformity of uranium–thorium oxide pellets prepared by different processes

A μ‐XRF study to assess the distribution of uranium and thorium in (U,Th)O₂ pellets covering the composition of advanced heavy water reactor (AHWR) fuel pellets prepared by powder metallurgical compaction (PMC) and coated agglomerate pelletization (CAP) routes was made using micro‐focus beam line (BL‐16) of Indus‐2 synchrotron radiation facility. The methodology thus developed was successfully applied to these pellets. The study reveals that the uranium distribution in pellets prepared by PMC route is uniform, whereas the pellets prepared through CAP route have a wide range of compositional variation. In addition, the uniformity in CAP route‐prepared pellets improves with increase in the relative amount of uranium in the pellets. The sample preparation in present methodology is very simple compared with scanning electron microscopy. The study reveals the utility of synchrotron‐based μ‐XRF for fuel pellet characterization of AHWR reactors. Alhough CAP route of fuel pellet preparation requires less exposure of personnel to high radiation dose, the non‐uniformity in the fuel pellet must be considered when using these pellets in reactors. Copyright © 2014 John Wiley & Sons, Ltd.     

Simulated defect growth avalanches during deformation of nanocrystalline copper

In this work we introduce a method to capture the proliferation of material defects that carry inelastic deformation, in microstructures simulated through isobaric–isothermal molecular dynamics. Based on the premise that inelastic dissipation is accompanied by a local temperature rise, our method involves analyzing the response of a chain of Nosé–Hoover thermostats that are coupled to the atomic velocities, while the microstructure deforms under the influence of a ramped external stress. We report results obtained from the uniaxial deformation of two nanocrystalline copper microstructures and show that our analysis allows the dissipative signal of a variety of inelastic events to be effectively unified via an ‘avalanche’ of dissipation. Based on this avalanche, we quantitatively compare dissipation for inelastic deformation under tension vs. compression, observing a significant tension–compression asymmetry in this regard. It is concluded that the present method is useful for discerning critical points that correspond to collective yield and inelastic flow.