Solution-processed electrochemical synthesis of ZnFe2O4 photoanode for photoelectrochemical water splitting

Journal of Solid State Electrochemistry - Herein, we report the synthesis of ZnO nanorod films onto FTO (fluorine-doped tin oxide) substrates using the solution-processed electrodeposition method....     

Impact of APCI ionization source in liquid chromatography tandem mass spectrometry based tissue distribution studies

Measurement of test article concentration in tissue samples has been an important part of pharmacokinetic study and has helped to co‐relate pharmacokinetic/pharmacodynamic relationships since the 1950s. Bioanalysis of tissue samples using LC–MS/MS comes with unique challenges in terms of sample handling and inconsistent analyte response owing to nonvolatile matrix components. Matrix effect is a phenomenon where the target analyte response is either suppressed or enhanced in the presence of matrix components. Based on previous reports electrospray ionization (ESI) mode of ionization is believed to be more affected by matrix components than atmospheric pressure chemical ionization (APCI) or atmospheric pressure photoionization. To explore the impact of ionization source with respect to bioanalysis of tissue samples, five structurally diverse compounds – atenolol, verapamil, diclofenac, propranolol and flufenamic acid – were selected. Quality control standards were spiked into 10 different biological matrices like whole blood, liver, heart, brain, spleen, kidney, skeletal muscle, eye and skin tissue and were quantified against calibration standards prepared in rat plasma. Quantitative bioanalysis was performed utilizing both APCI and ESI mode and results were compared. Quality control standards when analyzed with APCI mode were found to be more consistent in terms of accuracy and precision as compared with ESI mode. Additionally, for some instances, up to 20‐fold broader dynamic linearity range was observed with APCI mode as compared with ESI mode. As phospholid interferences have poor response in APCI mode, protein precipitation extraction technique can be used for multimatrix quantitation, which is more amenable to automation. The approach of multiple biological matrix quantitation against a single calibration curve helps bioanalysts to reduce turnaround time. Copyright © 2016 John Wiley & Sons, Ltd.     

Crystallographic and microstructural aspects of the superconductor YBa2Cu3O7-y —an overview

Crystal structures and structural inhomogeneities observed in YBa₂Cu₃O_7-y are reviewed. It is brought out that a proper understanding of the nature of the structural inhomogeneities is essential for exploiting the technological potential of this material. The need for an adequate characterization of specimens used for experiments is emphasized. Practical implications of the ferroelastic nature of the material are discussed.     

Hamiltonian cycles in polyhedral maps

We present a necessary and sufficient condition for existence of a contractible, non-separating and non-contractible separating Hamiltonian cycle in the edge graph of polyhedral maps on surfaces. We also present algorithms to construct such cycles whenever it exists where one of them is linear time and another is exponential time algorithm.     

Transient and steady state lateral charge transport in polymeric semiconductors

The Lateral photovoltaic effect (LPE) has been used as an effective tool to probe the dynamics of photogenerated charge carriers in conjugated polymer based optoelectronic devices. In this paper, we analyze the time-dependence of LPE in a position sensing device geometry using a discrete circuit equivalent model coupled with a spreading impedance approach. We elucidate the dependence of the lateral photovoltage (LPV) on the position, intensity and the modulation frequency (ω _c ) of the light beam. Previous experimental results for the position and ω _c dependence of the LPV in the steady state are successfully reproduced within the present approach. We predict a clear knee-like feature in the transient regime of the LPV for high photocurrent values. This feature prompts us to propose that the response time of the organic position sensing device decreases sharply with increasing incident intensity.     

Aqueous Polymerization of Methyl Methacrylate

Aqueous polymerization of methyl methacrylate (MMA), initiated by the potassium bromate-thioglycollic acid (TGA) redox system, has been studied at 30 ± 0.2° C under positive pressure of nitrogen. The rate is given by K[MMA] [TGA] ⁰[KBrO₃]^x where × = 1 for lower KBrO₃ concentrations and 0.5 for higher KBrO₃ concentrations. The reaction has been studied over the 20–45°C range. The activation energy was found to be 65.72 kJ/mol (15.71 kcal/mol) in the investigated range of temperature. Inorganic electrolytes except MnSO₄·4H₂O and Na₂C₂O₄ depress both the rate of polymerization and the maximum conversion. All the alcohols (viz., MeOH, EtOH, iso-PrOH, tert-BuOH) and acetone depress the rate of polymerization as well as the maximum conversion.     

Thermodynamic investigation on M–Te–O (M = Sc, Y) system

The standard Gibbs energy of formation of M₂TeO₆ and M₆TeO₁₂ (where M = Sc, Y), was determined from its vapor pressure measurements by employing thermogravimetry-based transpiration technique. This technique was validated by measuring the vapor pressure of well-studied substances such as TeO₂(s) and CdCl₂(s). The temperature dependence of the vapor pressure of TeO₂(g) over the mixtures M₆TeO₁₂ + M₂O₃ (where M = Sc, Y), generated by the incongruent vaporization reaction, M₆TeO₁₂(s) → 3M₂O₃(s) + TeO₂(g) + ½O₂(g) were measured in the temperature range 1,413–1,473 K and 1,623–1,743 K for Sc₆TeO₁₂(s) and Y₆TeO₁₂(s), respectively. Similarly, the vapor pressure of TeO₂(g) over the mixtures M₂TeO₆(s) + M₆TeO₁₂(s) generated by the vaporization reaction, 3M₂TeO₆(s) → M₆TeO₁₂(s) + 2TeO₂(g) + O₂(g) was measured in the temperature range (1,223–1,293 K) and (1,333–1,423 K) for Sc₂TeO₆(s) and Y₂TeO₆(s), respectively. From the vapor pressure measurements, the standard Gibbs energy of formation of M₆TeO₁₂ and M₂TeO₆ were derived.     

Fabrication and characterization of electrochemical double layer capacitors using ionic liquid-based gel polymer electrolyte with chemically treated activated charcoal electrodes

The present investigation deals with electrochemical double layer capacitors (EDLCs) made up of ionic liquid (IL)-based gel polymer electrolytes with chemically treated activated charcoal electrodes. The gel polymer electrolyte comprising of poly(vinylidine fluoride-co-hexafluropropylene) (PVdF-HFP)–1-ethyl-2,3-dimethyl-imidazolium-tetrafluroborate [EDiMIM][BF₄]–propylene carbonate (PC)–magnesium perchlorate (Mg(ClO₄)₂) exhibits the highest ionic conductivity of ~8.4?×?10^?3?S?cm^?1 at room temperature (~20 °C), showing good mechanical and dimensional stability, suitable for their application in EDLCs. Activation of charcoal was done by impregnation method using potassium hydroxide (KOH) as activating agent. Brunauer–Emmett–Teller (BET) studies reveal that the effective surface area of treated activated charcoal powder (1,515 m²?g^?1) increases by more than double-fold compared to the untreated one (721 m²?g^?1). Performance of EDLCs has been tested using cyclic voltammetry, impedance spectroscopy, and charge–discharge techniques. Analysis shows that chemically treated activated charcoal electrodes have almost triple times more capacitance values as compared to the untreated one.