Acid-base bifunctional catalysis of silica-alumina-supported organic amines for carbon-carbon bond-forming reactions

Acid-base bifunctional heterogeneous catalysts were prepared by the reaction of an acidic silica-alumina (SA) surface with silane-coupling reagents possessing amino functional groups. The obtained SA-supported amines (SA-NR2) were characterized by solid-state 13C and 29Si NMR spectroscopy, FT-IR spectroscopy, and elemental analysis. The solid-state NMR spectra revealed that the amines were immobilized by acid-base interactions at the SA surface. The interactions between the surface acidic sites and the immobilized basic amines were weaker than the interactions between the SA and free amines. The catalytic performances of the SA-NR2 catalysts for various carbon-carbon bond-forming reactions, such as cyano-ethoxycarbonylation, the Michael reaction, and the nitro-aldol reaction, were investigated and compared with those of homogeneous and other heterogeneous catalysts. The SA-NR2 catalysts showed much higher catalytic activities for the carbon-carbon bond-forming reactions than heterogeneous amine catalysts using other supports, such as SiO2 and Al2O3. On the other hand, homogeneous amines hardly promoted these reactions under similar reaction conditions, and the catalytic behavior of SA-NR2 was also different from that of MgO, which was employed as a typical heterogeneous base. An acid-base dual-activation mechanism for the carbon-carbon bond-forming reactions is proposed.     

Tandem mass spectrometry based investigation of cinnamylideneacetophenone derivatives: valuable tool for the differentiation of positional isomers

Cinnamylideneacetophenones have been extensively used as versatile starting materials in numerous different transformations. The structural characterization of this type of compounds is, therefore, of crucial importance since it can give information on the chemistry, reactivity and also the potential biological activity of this type of compounds. Thus, 24 derivatives were systematically studied by tandem mass spectrometry (MS²) with electrospray ionization (ESI), in positive ion mode. The protonated molecules, [M + H]⁺, formed under ESI conditions were induced to dissociate and the fragmentation patterns were studied. The information collected provided important structural information on the type of substituents present and constitute an important database concerning this family of compounds. Overall, it was found that the substitution pattern of the cinnamylideneacetophenone derivatives changes the ESI‐MS² fragmentation considerably. These results indicate that ESI‐MS² is a useful technique for distinguishing positional isomers of these cinnamylideneacetophenone derivatives. Copyright © 2011 John Wiley & Sons, Ltd.     

Simulating the changes in carbon structure during the burn-off process

Using a simple energetic criterion, we modelled the process of activation of 'soft' activated carbons. Eighteen carbon samples, differing in degree of graphitisation, and obtained using Molecular Dynamics annealing of an amorphous carbon precursor were studied. For all samples, the geometric pore size distribution was calculated using the method proposed by Bhattacharya and Gubbins. Adsorption isotherms for Ar at 87 K were simulated and analysed using different approaches widely applied in adsorption science (α(s), DA, APD, ND, BET). It is shown that our approach leads to similar changes in microporosity (with the rise in carbon burn-off) to those observed in real experiments. Moreover, the conclusions about the reality of popular methods of carbon porosity characterisation are given.     

Structure-activity relationship of caffeoylquinic acids on the accelerating activity on ATP production

Caffeoylquinic acid (CQA) is one of the phenylpropanoids which have various bioactivities such as antioxidant, antibacterial, anticancer, antihistamic, and other biological effects. We previously reported that 3,5-di-O-caffeoylquinic acid inhibited amyloid β(1-42)-induced cellular toxicity on human neuroblastoma SH-SY5Y cells and increased the mRNA expression level of glycolytic enzymes and the intracellular ATP level. To investigate structure-activity relationship on the accelerating activity on ATP production, we synthesized 1,4,5-tri-O-caffeoylquinic acid, 4,5-di-O-caffeoylquinic acid, 3,4,5-tri-O-caffeoylquinic acid, and other derivatives. Additionally, we evaluated intracellular ATP level in SH-SY5Y treated with each CQA derivative. As a result, 3,4,5-tri-O-caffeoylquinic acid showed the highest accelerating activity on ATP production among tested compounds. It was suggested that caffeoyl groups bound to quinic acid are important for activity and the more caffeoyl groups are bound to quinic acid, the higher accelerating activity on ATP production exhibits.     

Triangular trinuclear metal-N4 complexes with high electrocatalytic activity for oxygen reduction

A new class of macrocyclic metal-N(4) complexes [MN(4)](n) (M = Co and Fe) were designed and synthesized based on a triangular ligand. Their unique triangular trinuclear structure provides a high density of active sites and facilitates the reduction of dioxygen via a four-electron pathway. Among them, a [CoN(4)](3)/C catalyst (20 wt %) exhibits high catalytic activity and long-time stability for the oxygen reduction reaction (ORR) in alkaline conditions, superior to the commercial Pt/C catalyst. Such structurally well-defined [MN(4)](n) complexes provide a platform for a new generation of nonprecious metal catalysts (NPMCs) for fuel cell applications.     

Selective determination of cysteines through precolumn double-labeling and liquid chromatography followed by detection of intramolecular FRET

In this paper we introduce a novel approach for highly selective and sensitive analysis of cysteines (glutathione, cysteine, and homocysteine). This method is based on the detection of intramolecular fluorescence resonance energy transfer (FRET) in a liquid chromatography (LC) system after double-labeling of the amino and sulfhydryl groups of the cysteines. In this detection process, we monitored the FRET between the amine-derivatized and thiol-derivatized fluorophores. We screened 16 combinations of fluorescent reagents. As a result, FRET occurred most effectively when the sulfhydryl and amino groups of the cysteines were derivatized with 7-diethylamino-3-[{4'-(iodoacetyl)amino}phenyl]-4-methylcoumarin (DCIA, Ex/Em 390/480 nm) and 4-fluoro-7-nitrobenz-2-oxo-1,3-diazole (NBD-F, Ex/Em 480/540 nm), respectively, in this order. The double-labeled cysteines emitted NBD-F fluorescence (540 nm) through an intramolecular FRET process when they were excited at the wavelength of maximum excitation of DCIA (390 nm). The generation of FRET was confirmed by comparison with analysis of n-amylamine or tryptophan (amines without a sulfhydryl group) and 6-mercaptohexanol (thiol without an amino group) performed using LC and a three-dimensional fluorescence detection system. We were able to separate the double-labeled cysteines (DCIA and NBD-F) when performing LC on an ODS column with isocratic elution. The limits of quantification (signal-to-noise ratio = 10) and detection (signal-to-noise ratio = 3) for the cysteines, for a 20-μL injection volume, were in the range 150-670 fmol and 46-200 fmol, respectively. The sensitivity of the intramolecular FRET-forming derivatization method is higher than that of a system which takes advantage of conventional detection of the derivatives. Furthermore, this method provides sufficient selectivity and sensitivity to determine the total cysteines present in the plasma of healthy humans.     

Synthetic control of cage/network ratio of poly(methylsilsesquioxane)s for storage stability,hardness, and weather resistance of coating films

Poly(methylsilsesquioxane) (PMSQ) was synthesized using a two‐step process consisting of hydrolysis of methyl trimethoxysilane (MTMS) with aluminum chelate catalyst and successive condensation reactions conducted at elevated temperatures. Results of nuclear magnetic resonance and Fourier transform infrared measurements show that all terminal functional groups were Si? OH in PMSQ. Results show further that PMSQ has both a cage structure and a network structure, and a cage/network ratio is represented by a height ratio of ?64.5/?66.6 ppm. PMSQ of different molecular weight but the same Si? OH concentration is obtainable by varying the condensation reaction conditions such as the concentration, temperature, amount of aluminum chelate catalyst, and the solvent solubility parameter. A difference of the cage/network ratio occurs. A different cage/network ratio is dependent on the different reactivities of the intramolecular and intermolecular reactions. The relations of molecular structure of the obtained PMSQ molecular structure were characterized along with functions of storage stability, film hardness, and weather resistance. PMSQ designed with a larger cage/network ratio is necessary to obtain PMSQ with good storage stability and a coating film having good weather resistance. PMSQ designed with a smaller cage/network ratio should be prepared to obtain a coating film with high hardness. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Fuel concentration measurement of premixed mixture using spark-induced breakdown spectroscopy

This study determined the local equivalence ratio of a CH₄/air mixture in a laminar premixed flame using spark-induced breakdown spectroscopy (SIBS) with a fiber-coupled intensified charge coupled device (ICCD) spectrometer. Spectrally resolved emission spectra of plasma generated by a spark plug were investigated for their potential to measure local fuel concentrations in a premixed mixture. The influence of key parameters, such as the camera gate timing and spark energy, on the intensity of radical emission was illustrated. The intensity ratio of CN/NH had a greater sensitivity to the equivalence ratio than did that of CN/OH, and the local equivalence ratio could be obtained with high resolution by measuring the local intensity ratios of CN/NH. Moreover, a spark-plug sensor with an optical fiber was developed for application in spark-ignition engines. The atomic emission intensity during the breakdown and arc phases of spark discharge could be obtained using the fiber-optic spark-plug sensor. The H_α/O intensity showed better linearity than the CN/NH intensity ratio in lean mixtures. The results presented here confirm the use of SIBS as a diagnostic tool for spark-ignition engines.     

Photosensitized oxidation of methionine derivatives. Laser flash photolysis studies

The early events in the triplet 4-carboxybenzophenone (CB)-induced oxidation of N-acetyl-methionine methyl ester (N-Ac-Met-OCH₃) are investigated in aqueous solution. Upon electron transfer from the methionine residue of N-Ac-Met-OCH₃ to ³CB*, the resulting sulfur radical cation undergoes further reactions: (1) back electron transfer, (2) escape of the radical ions from the solvent cage, or (3) proton transfer and escape of the radicals. The yields and paths of these reactions are shown to depend strongly on the pH of the solution, and, similar to the previously reported results for dipeptides (Met-Gly and Gly-Met), on the structural nature of the methionine substituents. In the experiments performed in this work, low quencher concentrations were used to avoid formation of intermolecular transients (e.g., dimeric sulfur-centered radical cation (S∴S)⁺). Under these experimental conditions, the one-electron oxidized sulfur does not seem to become stabilized in an (S∴N)⁺ three-electron bonded intramolecular complex. The proposed mechanism is further supported by the stable products analysis. A detailed mechanism involving characterization of the transients is discussed and compared to that of methionine and methionine-containing dipeptides (Met-Gly and Gly-Met). Moreover, a newly installed transient absorption laser system is described in details.