The microenvironment in polymer solids with added plasticizers. An attempt to measure the size and distribution of free volume in poly(methyl methacrylate) solids

Various amounts of n-alkylbenzenes (C_n: C₆H₅-C_nH_2n+1 (n = 3-16)) were doped into poly(methyl methacrylate) (PMMA) films, and the emission and thermal properties of each film were measured in detail together with their solid-state ¹³C NMR spectra. The aim of the present work was to estimate the size distribution of free volume in amorphous regions of polymer solids heavily doped with plasticizers by using C_n as models of a plasticizer. The excimer fluorescence yields of C_n in PMMA were found to depend on both the amount of C_n and the length of the alkyl chains of C_n, although the fluorescence spectra of all of the C_ns in dilute fluid solution were almost the same. The quantitative analysis showed: (1) C_n with n ? 12 induces a phase separation in PMMA, in which almost all of the C_n molecules are in a separated phase, and thus they cannot penetrate regions in which PMMA chains are aggregated. This means that C_n with n ? 12 cannot enlarge the space between PMMA chains. (2) Smaller C_n (n < 11) can enter free volumes between PMMA chains that correspond to their molecular size, but they can enlarge them only to a limited extent. Thus, the amount by which plasticization can increase the free volume of PMMA is limited by the size of the dopant and the inherent free volume of the polymer matrix. (3) The efficiency of excimer formation was found to reveal the maximum amount of C_n that could fit in the free volume of PMMA. Thus our fluorescence measurements showed that PMMA solids that were plasticized to their limit had a free volume that was larger than the volume occupied by all the conformers of C₅ and smaller than the volume occupied by almost all the conformers of C₁₂. In conclusion, we were able to obtain information on plasticization and to demonstrate a method of monitoring microenvironments in polymer solids after they have been doped with plasticizers.     

An Application of a Theorem of Sheila Brenner for Hochschild Extension Algebras of a Truncated Quiver Algebra

Let A be a truncated quiver algebra over an algebraically closed field such that any oriented cycle in the ordinary quiver of A is zero in A. We give the number of the indecomposable direct summands of the middle term of an almost split sequence for a class of Hochschild extension algebras of A by the standard duality module D(A).

     

Direct and stepwise intercalation of alkylalcohols intoα-zirconium phosphate

Intercalation of alkylalcohols into -zirconium phosphate was investigated at 25°C and/or under reflux.n-Alcohols having two to five carbons and 2-propanol were taken up at 25°C. These alcohols, andn-hexanol and heptanol, also intercalated under reflux.n-Alcohols having eight to eighteen carbon atoms intercalated when a stepwise method was employed. 2-Butanol and tertiary amylalcohols intercalated under reflux using a butanol intercalate as a starting material. Ethanol-to-butanol intercalates were unstable at room temperature, losing alcohols and changing to -zirconium phosphate. The particle size of the -zirconium phosphate did not affect the intercalation of alcohols.     

Synthesis and Diels-Alder reaction of a sapphyrin derivative

Sapphyrins participate in Diels-Alder reactions with pentacene affording novel barrelene-fused sapphyrins. The new compounds were synthesized using traditional heating and microwave irradiation conditions. The experiments carried out under microwave irradiation proved cleaner, affording only the monoadduct and in higher yields.     

Estimating the pore size distribution of activated carbons from adsorption data of different adsorbates by various methods

Experimental adsorption isotherms of four adsorbates (N2, Ar, C6H6, and CCl4) as well as adsorption enthalpy (C6H6 and CCl4) measured on two strictly microporous carbons are used to evaluate the porosity of adsorbents (i.e., pore size distributions (PSDs) and average pore diameter ( Lav )). The influence of the diameter of adsorbates ( dA) as well as of the temperature ( T ) is analyzed in order to explain the differences or similarities between the above-mentioned quantities for all systems. Proposed previously, the general relationships between the parameters of the Dubinin-Astakhov (DA) isotherm equation (the characteristic energy of adsorption ( E0 ) and the exponent of this equation ( n )) and the average slit-width of carbon micropores are investigated. Moreover, the thermodynamic verification of the Horvath-Kawazoe (HK) theory and the ND model is presented based on data of the adsorption and enthalpy of adsorption of benzene and carbon tetrachloride on two carbons. Finally, the pore diameters calculated from calorimetry data using the Everett and Powl method and those calculated applying the recently developed equations are compared. In our opinion the change of apparent PSD should be monitored by performing a series of isotherm measurements from high (equal and higher than room temperature) to low temperatures (ca. 77.5 K) as was presented in the current study. Moreover, the analysis of the experimental data leads to the conclusion that the entropy of C6H6 and CCl4 can approach to the values characteristic of quasi-solid (a partially ordered structure). Therefore, this behavior of the adsorbate should be taken into consideration in the theoretical assumptions of model and its thermodynamic verification.     

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.     

Sample enrichment by using monolithic precolumns in microcolumn liquid chromatography

An on-line sample enrichment system was designed using monolithic precolumns in microcolumn LC. The monolithic ODS capillary columns were prepared via in situ sol-gel processes. The enrichment efficiency of the monolithic columns was tested by using phthalates as the analytes. The relative standard deviations (n = 6) for the retention time, peak area and peak height were between 0.4 and 1.2%, 0.9 and 5.5% and 0.4 and 3.9%, respectively. The system was linear (R2 > 0.99) within the working sample concentration and sample volume ranges. Comparing to 0.2 microl injection with a typical sample injector, the theoretical plate number of a same separation column was increased by 3-6-fold when the precolumn unit was used for sample injection. The recoveries of the analytes were between 88 and 120%, and the sample volume that could be injected into the system was increased up to 5000-fold. The limits of detection were improved by more than 2000-fold and were between 0.21 and 0.87 ng ml(-1) even with a UV absorbance detector. This system was applied to the determination of phthalates contained in laboratory distilled water and tap water samples.     

Convergence behavior of the density-matrix renormalization group algorithm for optimized orbital orderings

The density-matrix renormalization group algorithm has emerged as a promising new method in ab initio quantum chemistry. However, many problems still need to be solved before this method can be applied routinely. At the start of such a calculation, the orbitals originating from a preceding quantum chemical calculation must be placed in a specific order on a one-dimensional lattice. This ordering affects the convergence of the density-matrix renormalization group iterations significantly. In this paper, we present two approaches to obtain optimized orderings of the orbitals. First, we use a genetic algorithm to optimize the ordering with respect to a low total electronic energy obtained at a predefined stage of the density-matrix renormalization group algorithm with a given number of total states kept. In addition to that, we derive orderings from the one- and two-electron integrals of our test system. This test molecule is the chromium dimer, which is known to possess a complicated electronic structure. For this molecule, we have carried out calculations for the various orbital orderings obtained. The convergence behavior of the density-matrix renormalization group iterations is discussed in detail.     

Positive heterotropic cooperativity for selective guest binding via electronic communications through a fused zinc porphyrin array

Upon binding with C60 and diamines, such as 4,4'-bipyridine (bpy) and N,N,N',N'-tetramethylhexane-1,6-diamine (TMHDA), cyclic host 1 possessing two electronically coupled binding sites displays negative homotropic cooperativity and positive heterotropic cooperativity, and their ternary mixtures preferentially form inclusion complexes with hetero-guest pairs 1 supersetC60*bpy and 1 supersetC60*TMHDA under appropriate conditions. Spectroscopic titration profiles in toluene at 20 degrees C demonstrated that the association constants (Kassoc) of C60 with monodiamine complexes 1 supersetbpy (2.8 x 105 M-1) and 1 supersetTMHDA (1.5 x 105 M-1) are 8.5 and 4.5 times greater than that of C60 with guest-free 1 (3.3 x 104 M-1), respectively. On the other hand, mono-C60 complex 1 supersetC60 was 6.1 times more accessible than guest-free 1 toward TMHDA. Absorption spectroscopy in the absence of 1 indicated no direct interaction between C60 and diamines.