Crystal packing of two 5‐substituted 2‐methyl‐4‐nitro‐1H‐imidazoles

Infinite chains connected by N—H...N hydrogen bonding form the primary packing motif in two closely related 4‐nitroimidazole derivatives, viz. 5‐bromo‐2‐methyl‐4‐nitro‐1H‐imidazole, C₄H₄BrN₃O₂, (I), and 2‐methyl‐4‐nitro‐1H‐imidazole‐5‐carbonitrile, C₅H₄N₄O₂, (II). These chains are almost identical, even though in (II) there are two symmetry‐independent molecules in the asymmetric unit. The differences appear in the interactions between the chains; in (I), there are strong C—Br...O halogen bonds, which connect the chains into a two‐dimensional grid, while in (II), the cyano group does not participate in specific interactions and the chains are only loosely connected into a three‐dimensional structure.     

Sublimation enthalpy of dye molecules measured using fluorescence

We present an in-flight fluorescence detection scheme for molecular beams which is applied to determine the enthalpy of sublimation of dye molecules. We investigate tetraphenylporphyrin (TPP), porphine, and nile red, which are believed to be suitable candidates for molecular de Broglie wave interferometry. The measured values are H(sub)(TPP)=142+/-3 kJ/mol, H(sub)(porphine)=87+/-3 kJ/mol, and H(sub)(nile red)=66+/-2 kJ/mol. For TPP, sublimation enthalpies differ in the literature by more than a factor of 2. Our measurements confirm a value at the lower end of this scale. We discuss changes in the character of the molecular flow with the source temperature as a prime reason for discrepancies in the published data.     

Ph[PhC(O)NH]2P=NC(O)Ph: a new mesomeric stabilized azaylide. Synthesis, crystal structure and IR spectroscopic results

The structure of Ph[PhC(O)NH]₂P=NC(O)Ph (2) in solid state and in solution is discussed on the basis of a crystal structure analysis and IR and Raman spectra. In crystalline state 2 forms dimers which are associated via two pairs of bifurcated (N–H)₂O=C hydrogen bonds. The spectroscopic data are in good agreement with the crystallographic results with respect to the hydrogen bonding and they suggest that 2 also in solution is associated.     

Dielectronic recombination of lithium-like Ar15+

Dielectronic recombination (DR) of Ar¹⁵⁺(1s ²2s) ions was studied in a single-pass merged-beams experiment at the UNILAC (universal linear accelerator) of GSI. Absolute recombination rates and cross sections were measured for electron-ion center-of-mass energies from 0 to 580 eV. A number of Rydberg states formed by DR with 2s → 2p (Δn=0) and 2s → 3? (Δn=1) core excitations and even individual terms in the 1s ²3?3?′ configuration could be resolved. Theoretical calculations of DR cross sections are in good overall agreement with the data. In the calculations for Δn=0 transitions, effects of electric fields have to be included to reproduce the magnitude of the measured DR rates at the limit of the 2 _{p 1/2}? and 2 _{p 3/2}? Rydberg series. Discrepancies between theory and experiment are observed at the series limits of the (1s ²3?n?′) Rydberg series.     

(A19N7)[In4]2 (A = Ca,Sr) and (Ca4N)[In2]: Synthesis,Crystal Structures,Physical Properties,and Chemical Bonding

Single phase powders of (A₁₉N₇)[In₄]₂ (A = Ca, Sr) and (Ca₄N)[In₂] were prepared by reaction of melt beads of the metallic components with nitrogen. The crystal structure of (Ca₁₉N₇)[In₄]₂ was refined based on neutron and X‐ray powder diffraction data. The crystal structure of (Sr₁₉N₇)[In₄]₂ was solved from the X‐ray powder pattern. The structure refinements in combination with results from chemical analyses ascertain the compositions. The compounds (A₁₉N₇)[In₄]₂ (A = Ca, Sr) are isotypes of (Ca₁₉N₇)[Ag₄]₂; (Ca₁₉N₇)[In₄]₂ is probably identical to the earlier reported (Ca_18.5N₇)[In₄]₂. The crystal structure of the isotypes (A₁₉N₇)[In₄]₂ (A = Ca, Sr; cubic, , Ca: a = 1471.65(3) pm; Sr: a = 1561.0(1) pm) contains isolated [In₄] tetrahedra embedded in a framework of edge‐ and vertex‐sharing (A₆N) octahedra. Six of these octahedra are condensed by edge‐sharing around one central A²⁺ ion to form “superoctahedra” (A₁₉N₆) which are connected three‐dimensionally via further octahedra by corner‐sharing. The crystal structure of (Ca₄N)[In₂] (tetragonal, I4₁/amd, a = 491.14(4) pm, c = 2907.7(3) pm) consists of alternating layers of perovskite type slabs of vertex‐sharing octahedra (Ca₂Ca_4/2N) and parallel arranged infinite zigzag chains equation/tex2gif-stack-1.gif[In₂]. In the sense of Zintl‐type counting the compounds (A²⁺)₁₉(N^3?)₇[(In^2.125?)₄]₂ present an electron excess, (Ca²⁺)₄(N^3?)[(In^2.5?)₂] is electron deficient. Metallic properties are supported by electrical resistivity and magnetic susceptibility measurements. The analysis of the electronic structures gives evidence for the existence of homoatomic interactions In–In and significant heteroatomic metal–metal interactions Ca–In which favor the deviations of the title compounds from the (8 – N) rule.     

Reductive electron transfer in phenothiazine-modified DNA is dependent on the base sequence

A new DNA assay has been designed, prepared and applied for the chemical investigation of reductive electron transfer through the DNA. It consists of 5-(10-methyl-phenothiazin-3-yl)-2'-deoxyuridine (Ptz-dU, 1) as the photoexcitable electron injector and 5-bromo-2'-deoxyuridine (Br-dU) as the electron trap. The Ptz-dU-modified oligonucleotides were synthesised by means of a Suzuki-Miyaura cross-coupling protocol and subsequent automated phosphoramidite chemistry. Br-dU represents a kinetic electron trap, since it undergoes a chemical modification after its one-electron reduction that can be analysed by piperidine-induced strand cleavage. The quantification of the strand cleavage yields from irradiation experiments reveals important information about the electron-transfer efficiency. The performed DNA studies focused on the base sequence dependence of the electron-transfer efficiency with respect to the proposal that C*- and T*- act as intermediate electron carriers during electron hopping. From our observations it became evident that excess-electron transfer is highly sequence dependent and occurs more efficiently over T-A base pairs than over C-G base pairs.     

Quantitative determination of element distributions in silicon based thin film solar cells using SNMS

The determination of elemental distributions in thin film solar cells based on amorphous silicon using electron beam SNMS is possible by quantifying the measured ion intensities. The relative sensitivity factors (RSFs) for all elements measured have to be known. The RSFs have been determined experimentally using implantation and bulk standards with known concentrations of the interesting elements. The measured RSFs have been compared with calculated RSFs. The model used for the calculation of the RSFs takes into account the probability for electron impact ionization and the dwell time of the neutrals inside the postionization region. The comparison between measured and calculated RSF shows, that this model is capable to explain the RSFs for most elements. Differences between calculated and measured values can be explained by the formation of hydride and fluoride molecules (in case of H and F) and influences of the angular distribution of the sputtered neutrals in case of Al. The experimentally determined RSFs have been used for a quantification of depth profiles of the i-, buffer-, p- and front contact layers of a-Si solar cells.     

Analysis of chlorine and other halogens by activation with photons and neutrons

The analysis of halogens in various matrices is described. Activation analysis with mainly high energy bremsstrahlung (PAA) and pile neutrons (NAA) was applied. In the case of chlorine, fast procedures were worked out requiring not more than 100 min for one determination. The particular problems of fluorine analysis are discussed. The described techniques were applied for the following cases: Determination of total chlorine resp. bromine in oil samples; determination of chlorine in wood, glasses and TiN powders; determination of iodine in ZnSe single crystals using instrumental photoactivation.The limits of detection are: (interference-free in μg/g) F: 0.03/–; Cl: 0.1/0.05; Br: 0.04/0.003 and I: 0.1/0.01 using PAA/NAA. Activation analysis, being independent upon the chemical status of the analyte and usually less affected by blank problems has been found to be a useful complement to conventional chemical analysis. Received: 28 February 199 / Revised: 14 April 1998 / Accepted: 18 April 1998     

Octahedral Group 4 Metal Complexes That Contain Amine, Amido, and Aminopyridinato Ligands: Synthesis, Structure, and Application in alpha-Olefin Oligo- and Polymerization

The reaction of trimethylsilyl-substituted 2-aminopyridines with mixed chloro(dialkylamido)metal complexes (titanium and zirconium) leads via amine elimination to octahedral group 4 metal complexes that contain amine, amido, and aminopyridinato ligands. The X-ray crystal structure analyses of (4-Me-TMS-APy)(NMe(2))(HNMe(2))TiCl(2) (1) (crystallographic data: P2(1)/c (No. 14), monoclinic, a = 16.754(2) ?, b = 14.395(2) ?, c = 17.890(3) ?, beta = 110.28(1) degrees, Z = 8) and (6-Me-TMS-APy)(NEt(2))(HNEt(2))ZrCl(2) (2) (crystallographic data: P2(1)/n (No. 14) monoclinic, a = 10.125(1) ?, b = 16.331(1) ?, c = 15.276(2) ?, beta = 93.90(1), Z = 4) prove the compounds to be mononuclear with a cisoid arrangement of the two chloro ligands embedded in a reactive pocket determined by the steric demand of the three nitrogen containing ligands. Oligo- and polymerization studies with propene and 1-butene reveal the following results. First, 1 is a remarkably active precatalyst in contrast to the very low activity of 2. Second, MAO, a 1:1 mixture of i-Bu(3)Al/B(C(6)F(5))(3) (homogeneous polymerization) and ethylaluminum sesquichloride (if 1 is incorporated in a MgCl(2)-matrix) have shown to be the most active cocatalysts. Third, the polymers and oligomers are atactic.     

Reduction of (imine)Pt(IV) to (imine)Pt(II) complexes with carbonyl-stabilized phosphorus ylides

A novel method is reported for generation of the difficult-to-obtain (imine)Pt(II) compounds that involves reduction of the corresponding readily available Pt(IV)-based imines by carbonyl-stabilized phosphorus ylides, Ph3P=CHCO2R, in nonaqueous media. The reaction between neutral (imino)Pt(IV) compounds [PtCl4[NH=C(Me)ON=CR1R2]2] [R1R2 = Me2, (CH2)4, (CH2)5, (Me)C(Me)=NOH], [PtCl4[NH=C(Me)ONR2]2] (R = Me, Et, CH2Ph), (R1 = H; R2 = Ph or C6H4Me; R3 = Me) as well as anionic-type platinum(IV) complexes (Ph3PCH2Ph)[PtCl5[NH=C(Me)ON=CR2]] [R2 = Me2, (CH2)4, (CH2)5] and 1 equiv of Ph3P=CHCO2R (R = Me, Et) proceeds under mild conditions (ca. 4 h, room temperature) to give selectively the platinum(II) products (in good to excellent isolated yields) without further reduction of the platinum center. All thus prepared compounds (excluding previously described Delta4-1,2,4-oxadiazoline complexes) were characterized by elemental analyses, FAB mass spectrometry, IR and 1H, 13C[1H], 31P[1H] and 195Pt NMR spectroscopies, and X-ray single-crystal diffractometry, the latter for [PtCl2[NH=C(Me)ON=CMe2]2] [crystal system tetragonal, space group P4(2)/n (No. 86), a = b = 10.5050(10) A, c = 15.916(3) A] and (Ph3PCH2CO2Me)[PtCl3(NCMe)] [crystal system orthorhombic, space group Pna2(1) (No. 33), a = 19.661(7) A, b = 12.486(4) A, c = 10.149(3) A]. The reaction is also extended to a variety of other Pt(II)/Pt(IV) couples, and the ylides Ph3P=CHCO2R are introduced as mild and selective reducing agents of wide applicability for the conversion of Pt(IV) to Pt(II) species in nonaqueous media, a route that is especially useful in the case of compounds that cannot be prepared directly from Pt(II) precursors, and for the generation of systematic series of Pt(II)/Pt(IV) complexes for biological studies.