Nanoscale organization of the pathogen receptor DC-SIGN mapped by single-molecule high-resolution fluorescence microscopy.

DC-SIGN, a C-type lectin exclusively expressed on dendritic cells (DCs), plays an important role in pathogen recognition by binding with high affinity to a large variety of microorganisms. Recent experimental evidence points to a direct relation between the function of DC-SIGN as a viral receptor and its spatial arrangement on the plasma membrane. We have investigated the nanoscale organization of fluorescently labeled DC-SIGN on intact isolated DCs by means of near-field scanning optical microscopy (NSOM) combined with single-molecule detection. Fluorescence spots of different intensity and size have been directly visualized by optical means with a spatial resolution of less than 100 nm. Intensity- and size-distribution histograms of the DC-SIGN fluorescent spots confirm that approximately 80 % of the receptors are organized in nanosized domains randomly distributed on the cell membrane. Intensity-size correlation analysis revealed remarkable heterogeneity in the molecular packing density of the domains. Furthermore, we have mapped the intermolecular organization within a dense cluster by means of sequential NSOM imaging combined with discrete single-molecule photobleaching. In this way we have determined the spatial coordinates of 13 different individual dyes, with a localization accuracy of 6 nm. Our experimental observations are all consistent with an arrangement of DC-SIGN designed to maximize its chances of binding to a wide range of microorganisms. Our data also illustrate the potential of NSOM as an ultrasensitive, high-resolution technique to probe nanometer-scale organization of molecules on the cell membrane.     

New synthetic “tricks” using old reagents. A mild method for the conversion of RCONHR′ to RCONHR″

N-Alkyl-N-nitrosoamides, RCON(NO)R′, react with primary aliphatic amines (NH₂R″), in refluxing dichloromethane or at room temperature, to give RCONHR″ in 65–98% yields.     

Recent developments in zinc oxide target chemistry

Zinc oxide targets irradiated with high energy protons at the Los Alamos Meson Physics Facility (LAMPF) contain a number of radioactive spallation products in quantities large enough to warrant recovery. This paper describes methods for recovering⁷Be,⁴⁶Sc, and⁴⁸V from such targets and offers suggestions on possible ways to recover additional isotopes. The proposed methods are based on traditional precipitation and ion exchange techniques, are readily adaptable to hot cell use, and produce no hazardous waste components. The products are obtained in moderate to high yields and have excellent radionuclidic purity.     

Pretreatment of sugarcane bagasse hemicellulose hydrolysate for xylitol production byCandida guilliermondii

Applied Biochemistry and Biotechnology - In order to remove or reduce the concentrations of toxic substances present in the sugarcane bagasse hemicellulose hydrolysate for xyloseto-xylitol...     

Organonickel(II) Complexes with Anionic N-Donor Ligands. Hydration of coordinated nitriles at a nickel(II) site

The hydroxo complex (Bu₄N)₂[Ni₂(C₆F₅)₄(μ-OH)₂]reacts with 2,3,4,5,6-pentafluoro benzenamine (C₆F₅-NH₂), 1,3-diaryltriaz-1-enes (ArNH? N=N? Ar, Ar = Ph, 4-MeC₆H₄, 4-MeOC₆H₄), 7-aza-1H-indole (= 1H-pyrrolo[2.3-b]pyridine; Hazind), N-phenylpyridin-2-amine(pyNHPh), and N-phenylpyridine-2-carboxamide (py-CONHPh) at room temperature in acetone to give the binuclear complexes (Bu₄N)₂[Ni₂(C₆F₅)₄(μ-C₆F₅NH)₂] ( 1 ) and (Bu₄N)₂[{Ni(C₆F₅)₂} 2(μ-OH)(μ-azind)] ( 2 ) and the mononuclear complexes Bu₄N[Ni(C₆F₅)2(ArN₃Ar)] ( 3 – 5 ), Bu₄N[Ni(C₆F₅)₂(pyNPh)] ( 6 ), and Bu₄N[Ni(C₆F₅)₂(pyCONPh)] ( 7 ). The hydroxo.complex (Bu₄N)₂[{Ni(C₆F₅)2-(μ-OH)}₂] promotes the nucleophilic addition of water to pyridine-2-carbonitrile, 2-aminoacetonitrile, and 2-(dimethylamino)acetonitrile, and complexes 8 – 10 containing pyridine-2-carboxamidato, 2-aminoacetamidato and 2-(dimethylamino)acetamidato ligands are formed. Analytical (C, H, N) and spectroscopic (IR, ¹H and ¹⁹F-NMR, and FAB-MS) data were used for structural assignments. A single-crystal X-ray diffraction study of (Bu₄N)₂[{Ni(C₆F₅)₂}₂(μ-OH)(μ-azind)] ( 2 ) established the binuclear nature of the anion; the two Ni-atoms are bridged by an OH group and a 7-aza-7H-indol-7-yl group, but the central Ni? O? Ni? N? C? N ring is not planar, the dihedral angle between the Ni? O? Ni and Ni? N? C? N? Ni planes being 84.4°.     

Multistep energy transfer in single molecular photonic wires

We demonstrate the synthesis and spectroscopic characterization of an unidirectional photonic wire based on four highly efficient fluorescence energy-transfer steps (FRET) between five spectrally different chromophores covalently attached to double-stranded DNA. The DNA-based modular conception enables the introduction of various chromophores at well-defined positions and arbitrary interchromophore distances. While ensemble fluorescence measurements show overall FRET efficiencies between 15 and 30%, single-molecule spectroscopy performed on four spectrally separated detectors easily uncovers subpopulations that exhibit overall FRET efficiencies of up to approximately 90% across a distance of 13.6 nm and a spectral range of approximately 200 nm. Fluorescence trajectories of individual photonic wires show five different fluorescence intensity patterns which can be ascribed to successive photobleaching events.     

Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

SOLVENT EFFECTS ON THE TAUTOMERIZATION OF 5′-DEOXYPYRIDOXAL. A PHOTOPHYSICAL STUDY

Abstract— Absorption and fluorescence spectra of 5′-deoxypyridoxal (DPL) in various pure solvents and mixtures were recorded both at room temperature and over the range10–65°C. The areas under the absorption bands were analyzed to obtain the mole fraction (f_N, f_z) of two tautomers (the zwitterionic, Z, and neutral, N, forms) in the ground state. The following spectral parameters were determined from the fluorescence spectra: Stokes shift (Δv), fluorescence quantum yield of the neutral form (Q_N), fluorescence ratio of the neutral to the zwitterionic form (ø_N/ø_Z) and the rate constant of tautomerization (k₁) from Z to N in the excited state. Some of these parameters (f_N, Δv, Q_N, k₁) were found to depend on the proton donor character of the solvent, whereas others (ø_N/ø_Z) depended on its dipole moment. Thus, the absorption and fluorescence spectra of DPL allow one to obtain information on the polarity and the concentration of –OH groups on its environment.     

A Screening Method for Polycyclic Aromatic Hydrocarbons Determination in Water by Headspace SPME with GC-FID

A simple method for determination of polycyclic aromatic hydrocarbons (PAHs) in water using headspace solid-phase microextraction (HS-SPME) with gas chromatography-flame ionisation detector (GC-FID) was developed. In order to obtain the convenient experimental conditions for HS-SPME extraction an experimental design with two steps was accomplished. A 2^6-2 fractional factorial design and central composite design (CCD) considering three significant factors were used. Naphthalene, anthracene and fluoranthene were chosen as representatives of two, three and four aromatic rings, and the global response of three PAHs was used for the results, evaluation. The chosen extraction conditions were: 85 μm polyacrylate fibre; 50 °C temperature; 60 min time; 20 mL-dissolution volume (in 40 mL glass vial); without salt addition; and 2 min desorption time. The procedure was extended to other seven PAHs (acenaphthylene, acenaphthene, fluorene, phenanthrene, pyrene, chrysene and benzo(a)anthracene) and the analytical characteristics were checked. The limit of detection (LOD) was from 0.08 (anthracene) to 0.20 μg L^?1 (naphthalene). The precision expressed as relative standard deviation (RSD in %) using 50 μg L^?1 of each analyte ranged from 6.8 to 17 %. The method was applied to the analysis of the surface waters and leaching waters of contaminated soils from Gipuzkoa (North Spain). The PAHs were not detected in surface water samples. Most of the PAHs were found in the leachates from contaminated soils showing a maximum global value of 75.5 μg L^?1.