The influence of fly ash physical and chemical properties on electrostatic precipitation process

Flue gases emitted from coal fired power plants are mainly cleaned with electrostatic precipitators (ESP). Increased awareness of the effects of atmospheric pollution and tightening legislation force precipitator producers to increase their ESP efficiency, especially when collecting very fine particulates (PM2.5). The fly ash characteristic parameters are formatted during combustion process and its depend on the coal type as well as boiler parameters and combustion conditions. Due to that many series of tests were done to investigate the influence of fly ash physical and chemical properties on ESP operation.     

Study of low concentrated ionic ferrrofluid stability in magnetic field by ultrasound spectroscopy

Ultrasound spectroscopy has been used to investigate the effect of magnetic field on particle (cluster) size distribution in ionic ferrofluid. The method applied is non-destructive, fast and sensitive to structural changes of a suspension as it is based on measurements of ultrasonic attenuation. Changes in the ultrasound attenuation induced by an external magnetic field have been measured for different frequencies of the acoustic wave. According to the Harker-Temple theory, the aggregation process has been analysed on the basis of the cluster size distribution determined for different magnetic field intensities.     

Global phase diagram of the fractional quantum Hall effect arising from repulsive three-body interactions

The model of fermions in a magnetic field interacting via a purely three-body repulsive interaction has attracted interest because it produces, in the limit of short range interaction, the Pfaffian state with non-Abelian excitations. We show that this is part of a rich phase diagram containing a host of fractional quantum Hall states, a composite fermion Fermi sea, and a pairing transition. This is entirely unexpected, because the appearance of composite fermions and fractional quantum Hall effect is ordinarily thought to be a result of strong two-body repulsion. Recent breakthroughs in ultracold atoms have facilitated the realization of such a system, where this physics can be tested.     

Dose-rate effect in the model of semi-localized transitions (SLT)

The model of semi-localized transitions (SLT) unifies two standard models of thermoluminescence (TL) and optically stimulated luminescence (OSL) kinetics – the simple trap model (STM) and the model of localized transitions (LT). SLT equations were previously formulated for the heating stage of TL. This paper presents SLT equations for the excitation and fast relaxation stages. Exemplary calculations were performed to show the occurrence of dose-rate effect – previously found in STM. It is shown that the dose-rate effect occurs for both – localized and delocalized TL glow peaks.     

Interband excitations in the 1D limit of two-band fractional Chern insulators

We investigate the stability of the one-dimensional limit of $\nu =1/3$ Laughlin-like fractional Chern insulator with respect to the interband interaction. We propose a construction for the excitations in the infinite-interaction case and show that the energy gap remains finite in the thermodynamic limit. Next, by means of exact diagonalization and Density Matrix Renormalization Group approaches, we consider deviations from ideal dimerization and show that they reduce the stability of the FCI-like states. Finally, to show that our approach is not restricted to one model, we identify the dimer structure behind the thin-torus limit of other system – the checkerboard lattice.     

Supramolecular Materials Comprising Nucleic Acid Biopolymers

We have generated a supramolecular self-assembling film by exchanging the counter-ions of the phosphate moieties in nucleic acid with those of cationic amphiphiles as didodecyldimethylammonium bromide (or DDAB). SAXS and WAXS data for all film samples showed similar harmonic peaks suggesting a lamellar multilayer structure with layers of nucleic acids being separated by lipid bilayers of DDAB. AFM height images also showed that double stranded nucleic acid film can form the step or plateau type of structure and shorter nucleic acid film showed shorter step feature. Moreover, the length and the molecular structure of DNA and RNA can be used to manipulate the mechanical properties of these self-assembled films.     

Mu-Synthesis for Magnetic Bearings of Flywheel

In this paper, the μ-Synthesis Control method is applied to control Active Magnetic Bearings (AMBs) Flywheel. The dynamics of the open-loop system is influenced by external disturbances, nonlinearities, uncertainties and signal limits. Thus, a design methodology, which covers the practical issues of optimal robust control like the modelling of uncertainties, selection of optimal weighting functions is presented. The goal of this paper is the experimental evaluation robust performance of the AMBs system. The laboratory stand with the high speed rotor supported magnetically was built and presented. The stable operation, good stiffness of the rotor suspension and robust performances of the closed-loop AMBs is reached. Finally, the success of the robust control is demonstrated through results of computer simulations and experimental results. The experimental results show the effectiveness of the control system as well as good vibrations reduction of the designed controllers. (© 2009 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

1H-Pyrazolo[3,4-b]quinolines: Synthesis and Properties over 100 Years of Research

This paper summarises a little over 100 years of research on the synthesis and the photophysical and biological properties of 1H-pyrazolo[3,4-b]quinolines that was published in the years 1911–2021. The main methods of synthesis are described, which include Friedländer condensation, synthesis from anthranilic acid derivatives, multicomponent synthesis and others. The use of this class of compounds as potential fluorescent sensors and biologically active compounds is shown. This review intends to summarize the abovementioned aspects of 1H-pyrazolo[3,4-b]quinoline chemistry. Some of the results that are presented in this publication come from the laboratories of the authors of this review.     

Low-Carbohydrate,High-Protein,and Gluten-Free Bread Supplemented with Poppy Seed Flour: Physicochemical,Sensory, and Spectroscopic Properties

Background: This study aimed to determine the effect of poppy seed flour (PF) on the physicochemical and spectroscopic properties of low-carbohydrate, high-protein, and gluten-free bread. Methods: The changes at the molecular level were assessed in bread using attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR). Bread prepared with buckwheat, flaxseed, and pea protein was enriched with PF at a concentration of 5–15%. Results: The results showed that the pasting parameters of dough supplemented with PF were significantly decreased compared to the control sample. The obtained bread samples were characterized by good quality and had 14.6% of carbohydrate, 16.3% of protein, 10.2% of fiber, and 4.0% of fat, with a caloric value of 177 kcal/100 g. The addition of PF had little influence on crumb mechanical properties. The ATR-FTIR analyses revealed spectral changes in the region related to protein and carbohydrate structures, as well as changes in band intensity characteristic of α-1,4-glycoside and α-1,6-glycoside bonds. The analyses showed that the main starch skeleton remained clearly visible. Conclusions: PF up to 10% can be potentially applied as a functional ingredient in the production of bread based on buckwheat and linseed flour. Such low-carbohydrate bread can be particularly useful to diabetics.     

Efficient second‐order time integration for single‐species aerosol formation and evolution

The dynamics of a single‐species aerosol composed of droplets in air is described in terms of nucleation, evaporation, condensation, and coagulation processes. We present a comprehensive overview of the Euler–Euler formulation, which gives rise to a model in which fast nucleation that initiates aerosol droplets co‐exists with comparably slow condensation. The latter process is responsible for the subsequent growth of the droplets. To accurately represent the dynamical consequences of the fast nucleation process, while retaining numerical efficiency, a new second‐order time‐integration method for the nucleation, evaporation, and condensation processes is proposed and analyzed. The new time‐integration method takes the form of a ‘corrected Euler forward’ method. It includes rapid nucleation bursts and their possible cessation within a time step Δt. If the current nucleation burst persists for longer than the next time step, it is included fully, whereas cessation of the nucleation burst within the next Δt implies corrections to the effective rates in the algorithm. The identification of these two situations corresponds to the physical mechanism by which nucleation of a supersaturated vapor is halted because of the progressing condensation onto the already formed droplets. The resulting time‐integration method is shown to be second‐order accurate in time, whereas the computational costs per time step were found to be increased by less than 25% compared with the Euler forward method. The new method is also applied in combination with advective transport of the aerosol forming vapor to investigate a front of rapid nucleation. Adopting robust first‐order upwinding for the spatial discretization, we arrive at a flexible method that shows an overall first‐order convergence in Δt. For the full, spatially dependent system motivated by an aerosol of water droplets in air, the computational benefits of the new time‐integration method over the Euler forward scheme, are a factor of about 10 improvements in accuracy at a given Δt and a similar factor in computing time when keeping the same level of accuracy. Copyright © 2013 John Wiley & Sons, Ltd.