Ionic liquid behavior and high thermal stability of silver chloride nanoparticles: Synthesis and characterization

Silver chloride was found to be stable even after calcination at 650 °C for 10 h. SEM studies revealed the morphology of silver chloride as hexagonal particles. TEM studies show the size of silver chloride particles to have an average size of 6–7 nm. Thermal studies suggest that silver chloride nanoparticles behave like ionic liquid or molten salt in the range of 455–650 °C.     

Stereoconvergent Generation of a Contrasteric syn‐Bicyclopropylidene (=syn‐Cyclopropylidenecyclopropane) by Stille‐Like Coupling

Stereoisomerically pure endo‐ and exo‐7‐halo‐7‐(trimethylstannyl)benzonorcar‐3‐enes (=endo‐ and exo‐(1‐halo‐1a,2,7,7a‐tetrahydro‐1H‐cyclopropa[b]naphthalen‐1‐yl)trimethylstannane) 4 and 6 were selectively obtained by lithium? tin or magnesium? tin transmetalation in good yields (Scheme 2 and 3). The reaction of these compounds with copper(I) thiophene‐2‐carboxylate (CuTC) produced in both cases the corresponding C_S‐symmetric bicyclopropylidene (=cyclopropylidenecyclopropane) syn‐ 1 , a single diastereoisomer (Schemes 5 and 6). The structure of syn‐ 1 was undoubtedly elucidated by X‐ray single crystal diffraction. The coupling mechanism of the carbenoid cyclopropane is discussed (Scheme 7).     

Performance evaluation of k 0-instrumental neutron activation analysis and flame atomic absorption spectrophotometry in the characterization of various types of alloys

Certified alloys of Ni–Cu based, Fe based and Cu–Sn based were analysed by semi-absolute, standardless k ₀-instrumental neutron activation analysis (k ₀-INAA) and flame atomic absorption spectrophotometry (FAAS) aiming at evaluating their comparative performances. In k ₀-INAA measurements, the irradiations were performed at miniaturized neutron source reactor having thermal neutron flux of about 1 × 10¹² cm^?2 s^?1. The experimentally optimized parameters for INAA suggested a maximum of three irradiations for the quantification of 21 elements within 5 days. The same experiments also produced quantitative results of 13 elements not reported in the certificates of the reference materials. AAS was, however, unable to determine any of those elements. Accuracy of the two techniques was assessed by comparing their average root mean squared errors. The data analysis concluded that k ₀-INAA had better sensitivity and accuracy than FAAS.     

Influence of supporting ligand microenvironment on the aqueous stability and visible light-induced CO-release reactivity of zinc flavonolato species

The visible light-induced CO-release reactivity of the zinc flavonolato complex [(6-Ph₂TPA)Zn(3-Hfl)]ClO₄ (1) has been investigated in 1?:?1 H₂O?:?DMSO. Additionally, the effect of ligand secondary microenvironment on the aqueous stability and visible light-induced CO-release reactivity of zinc flavonolato species has been evaluated through the preparation, characterization, and examination of the photochemistry of compounds supported by chelate ligands with differing secondary appendages, [(TPA)Zn(3-Hfl)]ClO₄ (3; TPA = tris-2-(pyridylmethyl)amine) and [(bnpapa)Zn(3-Hfl)]ClO₄ (4; bnpapa = N,N-bis((6-neopentylamino-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine)). Compound 3 undergoes reaction in 1?:?1 H₂O?:?DMSO resulting in the release of the free neutral flavonol. Irradiation of acetonitrile solutions of 3 and 4 at 419 nm under aerobic conditions results in quantitative, photoinduced CO-release. However, the reaction quantum yields under these conditions are lower than that exhibited by 1, with 4 exhibiting an especially low quantum yield. Overall, the results of this study indicate that positioning a zinc flavonolato moiety within a hydrophobic microenvironment is an important design strategy toward further developing such compounds as CO-release agents for use in biological systems.     

A novel synthesis of 1,2,4-oxadiazoles and isoxazoles

A novel synthesis of 1,2,4-oxadiazoles and isoxazoles is described by utilizing the reactions between amidoximes and α,β-alkynic aldehydes and/or ketones. Conjugate addition products, obtained from amidoximes and α,β-alkynic aldehydes and/or ketones, afford 1,2,4-oxadiazoles and isoxazoles when treated with bases and acids, respectively. 1,2,4-Oxadiazoles can also be synthesized directly from amidoximes and α,β-alkynic aldehydes in a one-pot manner under basic conditions. The reactions are general for a variety of starting compounds and tolerate the presence of aryl, heteroaryl and alkyl groups.     

Synthesis, characterization, and biological activities of homo- and heterobimetallic complexes of Sn(IV) and Pd(II) with 2-mercapto-5-methyl benzimidazole

Organotin complexes have been synthesized by refluxing 2-mercapto-5-methyl benzimidazole with R₂SnCl₂/R₃SnCl (R = Me, n-Bu, Ph) in 1:1 molar ratio in the first step. In the second step, synthesized organotin(IV) complexes were treated with CS₂ and R₂SnCl₂/R₃SnCl/PdCl₂ to yield homo- and heterobimetallic complexes. The composition of the synthesized complexes, the bonding behavior of the donor groups, and structural assignments were studied by elemental analysis and different spectral techniques, including IR and multinuclear NMR (¹H, ¹³C). The IR data shows bidentate nature of the ligand which is also confirmed by semiempirical study, while NMR data confirms the four-coordinated geometry in solution. The free ligand and its respective homo- and heterobimetallic complexes were screened in vitro against a number of microorganisms to assess their biocidal properties. The biological activity data show that complexes exhibits significant antibacterial and antifungal activities as compared to ligand with few exceptions.     

Identification of phytobioconstituents present in Simmondsia chinensis L. seeds extract by GC-MS analysis

Simmondsia chinensis L. commonly called as Jojoba and belongs to family Simmondsiaceae. It has shown positive pharmacological activities of these compounds which include antidiabetic, antirheumatic, anthelminthic, antipsoriatic, antioxidant, antiepileptic, antigonorrheal, analgesic, anti-inflammatory, and pesticidal activity of jojoba. The multifaceted action of numerous bioactives existing in the seed extract with therapeutic activity have attracted great research interest by pharmaceutical industries. n-hexane extract of Simmondsia chinensis L. (SC) Seeds was analysed by gas chromatography-mass spectroscopy for identification and characterization of phytobioconstituents and its therapeutic claim by traditional system. The major compounds discovered in SC seeds extract are cis-9-octadecen-1-ol (24.85%), 9-octadecen-1-ol, (Z)- (18.24%), Stigmast-5-en-3-ol (14.10%), Ergost-5-en-3-ol, (3-β)-ol (5.26%), (Z)-14-tricosenyl formate (5.24%), Thiositosteroldisulfide (3.64%), Silane, Dimethyl (dimethylpentyloxysilyloxy) tetradecyloxy- (3.41%), Ergost-5-ene, 3-methoxy-, (3β,24R)- (2.55%), Ergosta-5,22-dien-3-ol (2.22%), 1,19-eicosadiene (2.17%), Pentacosane (2.02%), Stigmasta-5,22-dien-3-ol (1.64%), 1,19-eicosadiene (1.57%), 9-octadecen-1-ol, (Z)- (1.46%), 9,19-cyclo-9β-lanostan-3β-ol, 24-methylene- (1.14%), (9Z)-9-octadecenyl palmitate (1.50%), Hexadecanoic acid, 9-octadecenyl ester, (Z) (1.37%), 9Z)-9-octadecenyl (9Z)-9-hexadecenoate (1.01%). The hexane extract of Simmondsia chinensis seeds comprises various polar and nonpolar phytobioconstituents. These compounds were established qualitatively via GC-MS evaluation. GC-MS reports will be promising in pharmaceutical sector in identification of variety of Phytobioconstituents in distinct plant extracts, polyherbal extract and the standardization of particular plant materials.     

Defects-engineered tailoring of tri-doped interlinked metal-free bifunctional catalyst with lower gibbs free energy of OER/HER intermediates for overall water splitting

Controllable tailoring of metal-free/carbon-based nanostructures tends an encouraging way to enhance the bifunctional activity of electrodes, but a great challenge owing to the sluggish kinetics of oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). Herein, a facile tempted-defects assisted fractionation strategy is presented to synthesize N, S, and O tri-doped metal-free catalyst (DE-TDAP). Due to this effective tempted-defects and heteroatoms interlinking in DE-TDAP, it delivers the lowest overpotential toward both the OER (346 mV) and HER (154 mV) at 10 mA cm^?2. Remarkably, the DE-TDAP-electrode carries only a cell voltage of 1.81 V at 10 mA cm^?2 for overall water splitting and long-term stability. Considerably, the density functional theory (DFT) calculation exposes that the tailored-defects in tri-doped interlinking could enhance bifunctional catalytic performance devising from lower Gibbs free energy of OER/HER intermediates on active sites. This struggle henceforth provides a perceptive understanding of the synergetic principles of heteroatom-interlinking-tailoring nanostructures in water splitting.     

Multi-walled Carbon Nanotubes and Gold Nanorod Decorated Biosensor for Detection of microRNA-126

In this article, we introduced a novel electrochemical biosensor for the detection of microRNA-126. The biosensor utilizes a hybridization assay combined with multi-walled carbon nanotubes and gold nanorod-decorated screen-printed carbon electrodes. For electrode preparation, gold nanorods were first immobilized onto the surface of bare and multi-walled carbon nanotube-modified screen-printed carbon electrodes, and the thiol tagged-capture probe was immobilized on the electrode surface through gold and thiol group interaction. After the immobilization, thiol tagged-capture probe hybridized with the target sequence. Under optimum conditions, we determined limit of detection (LOD) and limit of quantification (LOQ) as high as 11 nM and 36 nM, respectively.     

Comparison of thermal curing behavior of liquid and solid urea–formaldehyde resins with different formaldehyde/urea mole ratios

This study was undertaken to compare thermal cure kinetics of urea–formaldehyde (UF) resins, in both liquid and solid forms as a function of formaldehyde/urea (F/U) mole ratio, using multi-heating rate methods of differential scanning calorimetry. The requirement of peak temperature (T _p), heat of reaction (ΔH) and activation energy (E) for the cure of four F/U mole ratio UF resins (1.6, 1.4, 1.2 and 1.0) was investigated. Both types of UF resins showed a single T _p, which ranged from 75 to 118 °C for liquid resins, and from 240 to 275 °C for solid resins. As the F/U mole ratio decreased, T _p values increased for both liquid and solid resins. ΔH values of solid resins were much greater than those of liquid resins, indicating a greater energy requirement for the cure of solid resins. The ΔH value of liquid UF resins increased with decreasing in F/U mole ratio whereas it was opposite for solid resins, with much variation. The activation energy (E _a) values calculated by Kissinger method were greater for solid UF resins than for liquid resins. The activation energy (E _α ) values calculated by isoconversional method which showed that UF resins in liquid or solid state at F/U mole ratio of 1.6 followed a multi-step reaction in their cure kinetics. These results demonstrated that thermal curing behavior of solid UF resin differed greatly from that of liquid resins, because of a greater branched network structure in the former.