Analysis of brain lipids by directly coupled matrix-assisted laser desorption ionization time-of-flight mass spectrometry and high-performance thin-layer chromatography

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS) is a soft ionization MS technique providing only minor fragmentation of the analyte. Therefore, the method is basically suitable for mixture analysis, although the ion yields strongly depend on the basicity/acidity of the analyte in relation to the applied matrix. Accordingly, less sensitively detectable compounds may be suppressed by more sensitively detectable compounds. Thus, separation of the mixture into the individual compounds is normally indispensable. This paper demonstrates the capabilities and limitations of a direct, simple, and inexpensive MALDI-high-performance thin-layer chromatography (HPTLC) coupling for the analysis of a crude lipid extract from porcine brain. Brain lipids were chosen because they represent a rather complex mixture and are of currently significant research interest. It was found that normal-phase HPTLC-separated lipids can be easily characterized by direct MALDI-TOF-MS analysis with sufficient resolution to allow the assignment of virtually all lipid classes, even rather minor species such as phosphorylated phosphoinositides or complex glycolipids as gangliosides. Advantages and disadvantages of this approach are discussed.     

Preparation of Functionalized Ayous Sawdust-carbon Nanotubes Composite for the Electrochemical Determination of Carbendazim Pesticide

Fine particles of Ayous sawdust (AS) were successfully modified by maleic anhydride to increase their accumulation capability towards carbendazim (Cbz). For a more efficient use of the biosourced material as electrode modifier for electrochemical detection, the functionalized particles were mixed with carbon nanotubes to yield a conductive composite. After electrochemical characterization, the modified GCE was applied to Cbz detection. A sensitivity of (2.61±0.08) μA M⁻¹ and a detection limit of 0.04 μM were obtained under optimized experimental conditions. Moreover, the designed sensor was found efficient for Cbz determination in real samples (spring water and commercial pesticide product).     

An improved cryogen for plunge freezing

The use of an alkane mixture that remains liquid at 77 K to freeze specimens has advantages over the use of a pure alkane that is solid at 77 K. It was found that a mixture of methane and ethane did not give a cooling rate adequate to produce vitreous ice, but a mixture of propane and ethane did result in vitreous ice. Furthermore, the latter mixture produced less damage to specimens mounted on a very thin, fragile holey carbon substrate.     

LC‐MS/MS analysis of Δ9‐tetrahydrocannabinolic acid A in serum after protein precipitation using an in‐house synthesized deuterated internal standard

An assay based on liquid chromatography/tandem mass spectrometry is presented for the fast, precise and sensitive quantitation of Δ9‐tetrahydrocannabinolic acid A (THCA) in serum. THCA is the biogenetic precursor of Δ9‐tetrahydrocannabinol in cannabis and has aroused interest in the pharmacological and forensic field especially as a potential marker for recent cannabis use. After addition of deuterated THCA, synthesized from D₃‐THC as starting material, and protein precipitation, the analytes were separated using gradient elution on a Luna C18 column (150 × 2.0 mm × 5 µm) with 0.1% formic acid and acetonitrile/0.1% formic acid. Data acquisition was performed on a triple quadrupole linear ion trap mass spectrometer in multiple reaction monitoring mode with negative electrospray ionization. After optimization, the following sample preparation procedure was used: 200 μL serum was spiked with internal standard solution and methanol and then precipitated ‘in fractions’ with 500 μL ice‐cold acetonitrile. After storage and centrifugation, the supernatant was evaporated and the residue redissolved in mobile phase. The assay was fully validated according to international guidelines including, for the first time, the assessment of matrix effects and stability experiments. Limit of detection was 0.1 ng/mL, and limit of quantification was 1.0 ng/mL. The method was found to be selective and proved to be linear over a range of 1.0 to 100 ng/mL using a 1/x weighted calibration model with regression coefficients >0.9996. Accuracy and precision data were within the required limits (RSD ≤ 8.6%, bias: 2.4 to 11.4%), extractive yield was greater than 84%. The analytes were stable in serum samples after three freeze/thaw cycles and storage at ?20 °C for one month. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of diastereomeric,deoxy and ring-expanded sulfone analogues of aigialomycin D

Several analogues of the fungal natural product aigialomycin D (AmD) have been synthesised. These include the stereoisomer 5′R,6′S-AmD, 2,4-di-deoxyAmD, 1′,2′,7′,8′-tetrahydroAmD and a 15-membered macrocyclic sulfone. Growth inhibitory activities of these compounds against the HL-60 leukaemic cell line were measured. The ring-expanded sulfone and tetrahydro-analogue were found to have similar IC₅₀ values to the natural product, whereas the 5′R,6′S-stereoisomer was inactive. Energy minimisation of AmD and the synthesised analogues resulted in a range of lowest energy conformers, from planar, open arrangements of the macrocycle in AmD and tetrahydroAmD to bent, L-shaped structures for the sulfone. The synthesis of methyl orsellinate was investigated and optimised as part of this work. A stereodivergent route to both enantiomers of the diol fragment from d-ribose was also achieved.     

UA62784 Is a cytotoxic inhibitor of microtubules, not CENP-E

A recent screen for compounds that selectively targeted pancreatic cancer cells isolated UA62784. We found that UA62784 inhibits microtubule polymerization in?vitro. UA62784 interacts with tubulin dimers ten times more potently than colchicine, vinblastine, or nocodazole. Competition experiments revealed that UA62784 interacts with tubulin at or near the colchicine-binding site. Nanomolar doses of UA62784 promote the accumulation of mammalian cells in mitosis, due to aberrant mitotic spindles, as shown by immunofluorescence and live cell imaging. Treatment of cancerous cell lines with UA62784 is lethal, following activation of apoptosis signaling. By monitoring mitotic spindle perturbations and apoptosis, we found that the effects of UA62784 and of some known microtubule-depolymerizing drugs are additive. Finally, high content screening of H2B-GFP HeLa cells revealed that low doses of UA62784 and vinblastine potentiate each other to inhibit proliferation.     

About de Smit��s question on flatness

Let ${\varphi : A \rightarrow B}$ be a flat morphism of Artin local rings with the same embedding dimension. Denote by ${\mathfrak{m}_A}$ the maximal ideal of A. Bart de Smit asked whether any finite B-module that is A-flat is B-flat. We prove the conjecture in embedding dimension one or two. In embedding dimension n, we prove the conjecture under an additional assumption on ${B/\mathfrak{m}_{A}B}$ .     

Mechanism of YF3 nanoparticle formation in reverse micelles

This article reports an investigation of the mechanism of YF(3) nanoparticle formation in two variants of the reverse microemulsion precipitation method. These two variants involve the addition of F(-), either as a microemulsion or directly as an aqueous solution, to Y(3+) dispersed in nonionic reverse micelles. The two methods yield amorphous and single-crystal nanoparticles, respectively. The kinetics of reagent mixing are studied by (19)F NMR and colorimetric model reactions, and the particle growth is monitored by TEM. Mixing and nucleation are shown to occur within seconds to minutes whereas particle growth continues for 4 to 48 h, depending on the particle type. Moreover, the growth rate remains constant during most of the growth period, indicating that Ostwald ripening is the most probable growth mechanism. The single-emulsion method also produces a minority amorphous population that exhibits significantly different growth kinetics, attributed to a coagulation mechanism. Secondary growth experiments, involving the addition of precursor ions to mature particles, have been conducted to evaluate the relative importance of nucleation and the competitive growth of existing particle populations. The key differences between the two methods reside in the nucleation step. In the case of the classical method, nucleation occurs upon intermicellar collisions and under conditions of comparable concentrations of Y(3+) and F(-). This method generates more numerous stable nuclei and smaller particles. In the single-microemulsion method, nucleation occurs in the presence of excess F(-) through the interaction of Y(3+)-containing micelles with microdroplets of aqueous F(-). These conditions lead to the formation of crystalline particles and a wider size distribution of unstable nuclei.     

MALDI-TOF-MS Directly Combined with TLC: A Review of the Current State

Thin-layer chromatography (TLC) is a widely used, fast and inexpensive method for separating complex mixtures. Unfortunately, the quality of achievable separation represents only one side. An additional problem is the unambiguous assignment of the obtained spots to defined compounds. Clear identification of spots is often not possible by common staining methods and comparison with a known reference compound. Therefore, further analytical techniques are mostly required for further structural elucidation. Mass spectrometry (MS) is a suitable method due to its high sensitivity. In particular, matrix-assisted laser desorption and ionization time-of-flight (MALDI-TOF) MS is a modern soft-ionization technique that may be easily combined with TLC. This review summarizes the so far available knowledge about direct TLC–MALDI combination and gives an overview about different molecule classes that have already been successfully analyzed by this approach. This review critically summarizes the capabilities and limitations of the direct MALDI–TLC combination and highlights in particular the problems related to sample preparation and instrumentation.