Poly(ethylene terephthalate) waste derived chemicals as an antistripping additive for bitumen – An environment friendly approach for disposal of environmentally hazardous material

The increasing accumulation of poly(ethylene terephthalate) polymer and poor recycle/disposal practices have made them omnipresent and a major culprit for environmental pollution. Currently global research efforts are focused on primary and secondary recycling of PET waste or through landfills. Chemical recycling of PET through hydrolytic or aminolytic route has been attempted by many researchers however with limited end applications. In our investigations we have used PET waste as a synthon and chemically converted it through a new non-catalytic route into several benzamide derivatives. We have successfully tested them for antistripping performance in bitumen. Our results as elaborated in the paper indicate a comparable performance of the new chemistry products based on PET, to commercially used antistripping chemicals. Our research work thus opens a new route for the recycling of used PET in bituminous concrete roads which may help in alleviating a major environmental problem and disposal of waste PET polymer in large scale.     

Synthesis,characterization and catalytic activities of a reusable polymer-anchored palladium(II) complex: effective catalytic hydrogenation of various organic substrates

A poly(3,6-dibenzaldimino N-vinyl carbazole) Pd(II) complex has been synthesized and characterized by physicochemical and spectroscopic techniques. The complex was found to be highly active toward hydrogenation reactions of various organic substrates under atmospheric pressure at ambient temperature. A tentative reaction mechanism is proposed on the basis of kinetic studies and isolation of reactive intermediates. The catalyst shows good conversion rates, thermal stability and recyclability.     

The effect of length of single‐walled carbon nanotubes (SWNTs) on electrical properties of conducting polymer–SWNT composites

DC conductivity of conjugated polymer‐single‐walled carbon nanotube (SWNT) composite films has been measured for different SWNT concentrations. The composite was prepared by dispersing SWNTs in the poly (3‐octylthiophene), P3OT matrix already dissolved in xylene. The conductivity of the composite films showed a rapid increase as the SWNT concentration increases beyond a certain value. This behavior is explained in terms of percolating paths provided by the SWNTs in the volume of polymer matrix. To investigate the effect of length of nanotubes on the percolation conductivity, different SWNT samples were employed with similar diameter but varying tube lengths. It was found that the conductivity of the composite films is strongly dominated by the length of the nanotubes. Lower percolation limit and high conductivity value of composite films is observed for longer nanotubes. Furthermore, the conductivity is observed to be dependent on the size of the host polymer molecule also. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 89–95, 2010     

Anthocyanin-rich black currant extract suppresses the growth of human hepatocellular carcinoma cells

Dietary antioxidants, such as anthocyanins, are helpful in the prevention and control of various diseases by counteracting the imbalance of oxidative and antioxidative factors in the living systems. Black currant (Ribes nigrum L., Grossulariaceae) is known to contain high amounts of anthocyanins (250 mg/100 g fresh fruit). Black currant fruits have been used in Asian and European traditional medicine for the treatment of a variety of diseases. Black currant extract has recently been found to be the second most effective amongst nine different berry extracts studied for their free radical scavenging activity. Constituents present in black currant juice have been found to exert a number of health-promoting effects, including immunomodulatory, antimicrobial and antiinflammatory actions, inhibition of low-density lipoprotein, and reduction of cardiovascular diseases. Although antioxidant and antiinflammatory effects of black currant juice could be of value in preventing and treating oxidative stress- and inflammation-driven cancers, no experimental evidence is available to now. The objective of the present study was to evaluate the potential antiproliferative effects of black currant fruit skin extract against HepG2 human liver cancer cells. The aqueous extract yielded an anthocyanin-rich fraction with cyanidin-3-O-rutinoside as one of the major anthocyanins. This fraction exhibited a potent cytotoxic effect on HepG2 cells and this effect was more pronounced than that of delphinidin and cyanidin, two major aglycones of anthocyanins present in black currant. Our results indicate, for the first time, that black currant skin containing an anthocyanin-rich fraction inhibits the proliferation of liver cancer cells, possibly due to additive as well as synergistic effects. This product could be useful in the prevention and treatment of human hepatocellular carcinoma.     

Synthesis and characterization of a polymer-anchored palladium(II) Schiff base complex and its catalytic efficiency in phosphine-free Sonogashira coupling reactions

A polymer-anchored Pd(II) Schiff base complex has been synthesized by reacting a polymeric amine with 2-pyridinecarboxaldehyde to get the polymer-anchored Schiff base, which was then reacted with palladium acetate. The catalyst was characterized by physicochemical and spectroscopic methods. It shows excellent catalytic activity in the Sonogashira coupling of phenylacetylene with aryl halides using triethylamine as a base and copper iodide as a co-catalyst in water under open air at 70 °C. We have also studied the effects of base and solvent on the coupling reaction. Sonogashira reactions of phenylacetylene with a variety of functionalized aryl halides were performed under the optimized reaction conditions. This catalyst gives excellent yields without the use of phosphine ligands. Further experiments showed that the catalyst can be used five times without much loss in the catalytic activity.     

The interplay of hydrophobic and electrostatic effects in the surfactant-induced aggregation/deaggregation of chlorin p6

The aggregation/deaggregation of chlorin p6 with the surfactants CTAB, SDS, and TX 100 have been studied by using absorption, fluorescence, and light scattering techniques. The ionic surfactants are found to cause aggregation of fluorophore at submicellar concentrations. The aggregates dissolve at higher surfactant concentrations to yield micellized monomers. This is rationalized by the interplay of electrostatic and hydrophobic effects. A prominent pH effect is observed in the ionic surfactant induced aggregation process as the charge on the fluorophore is controlled by the pH of the medium. Interestingly, the neutral TX-100 also induces aggregation of chlorin p6 at low concentrations, indicating that hydrophobic effects by themselves can cause aggregation unless there is a hindrance by repulsive electrostatic effects.     

A comparative adsorption study with different industrial wastes as adsorbents for the removal of cationic dyes from water

Four adsorbents have been prepared from industrial wastes obtained from the steel and fertilizer industries and investigated for their utility to remove cationic dyes. Studies have shown that the adsorbents prepared from blast furnace sludge, dust, and slag have poor porosity and low surface area, resulting in very low efficiency for the adsorption of dyes. On the other hand, carbonaceous adsorbent prepared from carbon slurry waste obtained from the fertilizer industry was found to show good porosity and appreciable surface area and consequently adsorbs dyes to an appreciable extent. The adsorption of two cationic dyes, viz., rhodamine B and Bismark Brown R on carbonaceous adsorbent conforms to Langmuir equation, is a first-order process and pore diffusion controlled. As the adsorption of dyes investigated was appreciable on carbonaceous adsorbent, its efficiency was evaluated by comparing the results with those obtained on a standard activated charcoal sample. It was found that prepared carbonaceous adsorbent exhibits dye removal efficiency that is about 80-90% of that observed with standard activated charcoal samples. Thus, it can be fruitfully used for the removal of dyes and is a suitable alternative to standard activated charcoal in view of its cheaper cost.     

Reatarding effect of nitrogen ylide for the polymerization of N-vinyl pyrrolidone

-Picolinium-p-chlorophenacylide (-PCFY) acts as a retarder for polymerization of N-vinyl pyrrolidone. The polymerization runs were carried out at 60°C using benzene as an inert solvent. The kinetic equation for the present system may be written asR _p [-PCPY]^–1.0 [AIBN]^0.66[N-VP]^1.0. The value of overall energy of activation for polymerization in presence and absence of-PCPY was computed as 44.0 and 42.3 kJ mol^–1, respectively. The inverse relationship ofR _p and¯M _v with-PCPY suggests that-PCPY acts as a polymerization retarder. The retarding effect is also evidenced by higher initiator exponent value and higher value of energy of activation in presence of ylide. A mechanism is also proposed in which polymer propagating chain combines with one ylide component to give resonance stabilized radical.     

Cross-axis synchronous flow-through coil planet centrifuge (type XLL). I. Design of the apparatus and studies on retention of stationary phase

The fourth prototype holds a pair of column holders in the lateral position at 15 cm from the center of the rotary shaft horizontally mounted on the rotary frame at 7.6 cm from the central axis of the apparatus. Using short coils of 2.6 mm I.D. PTFE (polytetrafluoroethylene) tubing with 7.6 cm and 24 cm helical diameters, retention of the stationary phase was measured in ten pairs of two-phase solvent systems under various experimental conditions. Satisfactory retention was obtained by choosing proper combinations of three factors, i.e., the direction of planetary motion, head-tail elution mode, and inward-outward elution mode. The polar butanol solvent systems showed excellent retention from 65 to 80% in the 7.6 cm helical diameter left-handed coil.     

Fabrication and Characterization of Zinc Oxide Nanowire Based Two-electrode Capacitive Biosensors on Flexible Substrates for Estimating Glucose Content in a Sample

The present work deals with fabrication and characterization of the zinc oxide (ZnO) nanowire based novel two-electrode capacitive biosensors on flexible Polyethylene terephthalate (PET) substrates for accurate estimation of glucose by analyzing the fundamental dielectric nature of the relevant sample. The morphology and crystalline quality of grown nanowires are analyzed by using field-emission scanning electron microscope (FESEM) and X-ray diffractometer (XRD), respectively. Current and capacitance values of the device have been studied for ten different glucose concentrations relevant to the physiological standards. The analytical performance of the devices in terms of enzyme activity, reliability and flexibility has also been evaluated.