A novel ditopic zinc-salophen macrocycle: a potential two-stationed wheel for [2]-pseudorotaxanes

Crown ether macrocycle 1 including a zinc-salophen unit is obtained via a de novo synthetic design to give a potential pH-driven two-stationed wheel component of [2]-pseudorotaxane systems.     

Metal-support interaction and redox behavior of Pt(1 wt %)/Ce0.6Zr0.4O2

The catalyst Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is studied by CO-temperature programmed reduction (CO-TPR), isothermal oxygen storage complete capacity (OSCC), X-ray absorption spectroscopy (XAS) at the Pt L(III) edge, and in situ X-ray diffraction (in situ XRD), with the aim of elucidating the role of supported metal in CO oxidation by ceria-based three-way catalysts (TWC). The redox behavior of Pt(1 wt %)/Ce(0.6)Zr(0.4)O(2) is compared to that of bare ceria-zirconia. OSCC of redox-aged Pt/ceria-zirconia is twice that of bare ceria-zirconia, and the maximum of CO consumption occurs at a temperature about 300 K lower than redox-aged ceria-zirconia. XAS analysis allows one to evidence the formation of a platinum-cerium alloy in redox-aged samples and the stability of the metal particles toward oxidation and sintering during high-temperature treatments. Under CO flux at 773 K, bare ceria-zirconia shows a continuous drift of diffraction peaks toward smaller Bragg angles, due to a progressive increase of Ce(III) content. Under the same treatment, the structural rearrangement of Pt-supported ceria-zirconia starts after an induction time and takes place with an abrupt change of the lattice constant. The experimental evidence points to the role of supported Pt in modifying the redox properties of ceria-zirconia with respect to the bare support. It is proposed that the much faster bulk reduction observed by in situ XRD for redox-aged Pt/ceria-zirconia can be attributed to an easier release of reacted CO(2), producing a more effective turnover of reactants at the catalyst surface.     

Capillary electrophoresis–electrospray mass spectrometry and HR–ICP–MS for the detection and quantification of 10B-boronophenylalanine (10B–BPA) used in boron neutron capture therapy

Boron neutron capture therapy (BNCT) is a bimodal radiotherapeutic treatment based on the irradiation of neoplastic tissues with neutrons after the tissues have selectively accumulated molecules loaded with nuclides with large neutron capture cross-sections (such boron-10). Boron-10 carriers have been tested to a limited extent, and clinical trials have been conducted on sulfhydryl borane (¹⁰B-BSH) and boronophenylalanine (¹⁰B-BPA). However, precise and accurate measurements of boron-10 concentrations (0.1–100 μg/g) in specimens and samples of limited size (μg scale) are needed in order to be able to biologically characterise new compounds in predictive tissue dosimetry, toxicology and pharmacology studies as well as in clinical investigations. A new approach based on fast separation and detection of ¹⁰B-BPA performed by coupling capillary electrophoresis to electrospray mass spectrometry is reported. This method allows the quantitative analysis and characterisation of ¹⁰B-BPA in a short time with a high separation efficiency. Detection limits of 3 μM for ¹⁰B-BPA and 30 ng/mL for ¹⁰B were obtained with CE–ESI–MS. A quantification limit of 10 μM for ¹⁰B-BPA (100 ng/mL for ¹⁰B) was attained. The total boron-10 concentration was determined by high-resolution inductively coupled mass spectrometry in order to validate the method. Boron-10 isotope measurements were carried out by HR–ICP–MS at medium resolution (R=4000) due to the presence of an isobaric interference at mass 10. Good agreement was obtained between the values from CE–ESI–MS and those from HR–ICP–MS. The method has been successfully used to determine the ¹⁰B-BPA in two lines of cultured cells.     

2,6-Dichloro-9-thiabicyclo[3.3.1]nonane: multigram display of azide and cyanide components on a versatile scaffold

2,6-Dichloro-9-thiabicyclo[3.3.1]nonane, easily available by an improved condensation of sulfur dichloride, sulfuryl chloride, and 1,5-cyclooctadiene, is a well- behaved scaffold for the nucleophilic substitution of azides and cyanides via neighboring- group participation by the sulfur atom. The products are isolated in high yields with purity >95% by simple extraction and washing protocols.     

640 Gbits/s photonic logic gates

We demonstrate 640 Gbits/s all-optical A AND B, and ā AND B logic functions using pump depletion in a periodically poled lithium niobate waveguide. Bit-error-rate measurements show the effectiveness of the scheme, with a penalty of <2 dB.     

Ageing of plasma-mediated coatings with embedded silver nanoparticles on stainless steel: An XPS and ToF-SIMS investigation

Nanocomposite thin films (∼170 nm), composed of silver nanoparticles enclosed in an organosilicon matrix, were deposited onto stainless steel, with the aim of preventing biofilm formation. The film deposition was carried out under cold plasma conditions, combining radiofrequency (RF) glow discharge fed with argon and hexamethyldisiloxane and simultaneous silver sputtering. XPS and ToF-SIMS were used to characterize Ag-organosilicon films in native form and after ageing in saline solution (NaCl 0.15 M), in order to further correlate their lifetime with their anti-fouling properties. Two coatings with significantly different silver contents (7.5% and 20.3%) were tested. Surface analysis confirmed the presence of metallic silver in the pristine coating and revealed significant modifications after immersion in the saline solution. Two different ageing mechanisms were observed, depending on the initial silver concentration in the film. For the sample exhibiting the low silver content (7.5%), the metal amount decreased at the surface in contact with the solution, due to the release of silver from the coating. As a result, after a 2-day exposure, silver nanoparticles located at the extreme surface were entirely released, whereas silver is still present in the inner part of the film. The coating thickness was not modified during ageing. In contrast, for the high silver content film (20.3%), the thickness decreased with immersion time, due to significant silver release and matrix erosion, assigned to a percolation-like effect. However, after 18 days of immersion, the delamination process stopped and a thin strongly bounded layer remained on the stainless steel surface.     

Credit contagion in a network of firms with spatial interaction

This contribution studies the effects of credit contagion on the credit risk of a portfolio of bank loans. To this aim we introduce a model that takes into account the counterparty risk in a network of interdependent firms that describes the presence of business relations among different firms. The location of the firms is simulated with probabilities computed using an entropy spatial interaction model. By means of a wide simulation analysis we investigate the behavior of the model proposed and study the effects of default contagion on the loss distribution of a portfolio of bank loans.     

Phytochemical Constituents,Antioxidant Activity,and Toxicity Assessment of the Aerial Part Extracts from the Infraspecific Taxa of Matthiola fruticulosa (Brassicaceae) Endemic to Sicily

In a project designed to investigate the specific and infraspecific taxa of Matthiola endemic to Sicily (Italy) as new potential sources of bioactive compounds in this work, the infraspecific taxa of Matthiola fruticulosa were studied, namely, subsp. fruticulosa and subsp. coronopifolia. HPLC–PDA/ESI–MS and SPME–GC/MS analyses of hydroalcoholic extracts obtained from the aerial parts of the two subspecies led to the detection of 51 phenolics and 61 volatile components, highlighting a quite different qualitative–quantitative profile. The antioxidant properties of the extracts were explored through in vitro methods: 1,1-diphenyl-2-picrylhydrazyl (DPPH), reducing power and Fe²⁺ chelating activity assays. The results of the antioxidant tests showed that the extracts possess a different antioxidant ability: particularly, the extract of M. fruticulosa subsp. fruticulosa exhibited higher radical scavenging activity than that of subsp. coronopifolia (IC₅₀ = 1.25 ± 0.02 mg/mL and 2.86 ± 0.05 mg/mL), which in turn displayed better chelating properties (IC₅₀ = 1.49 ± 0.01 mg/mL and 0.63 ± 0.01 mg/mL). Lastly, Artemia salina lethality bioassay was performed for toxicity assessment. The results of the bioassay showed lack of toxicity against brine shrimp larvae for both extracts. The data presented indicate the infraspecific taxa of M. fruticulosa as new and safe sources of antioxidant compounds.     

A Study for the Cause of Ferulic Acid-Induced Quenching of Tyrosine Fluorescence and Whether it is a Reliable Marker of Intermolecular Interactions or Not

Intrinsic fluorescence of peptides and proteins is extensively used to monitor their specific interactions with several natural and synthetic molecules known to have wide-ranging beneficial or detrimental effects on health. A consequence of these interactions would be a significant decrease of the fluorescence emission intensity of Tyrosine (Tyr) and/or Tryptophan (Trp) residues in the protein due to structural rearrangements of proteic microenvironment. However fluorescence quenching can be also caused by “trivial” artefacts. In this study we examined the effect of Ferulic acid (FA) on Tyr fluorescence. FA is a natural anti-oxidant suggested to bind to and to modify the structural properties of several proteins thus altering their biological activities. Fluorescence spectroscopy experiments on Tyr and on proteins containing Tyr and no Trp like beta amyloid peptides and Insulin were performed. Our results suggest that Tyr fluorescence loss can mainly result from an inner filter effect rather than from specific interactions with FA.     

The improvement of InAs/GaAs quantum dot properties capped by Graphene

InAs self‐assembled quantum dots (QDs) were grown by molecular beam epitaxy on (001) GaAs substrate. Uncapped and capped QDs with GaAs and graphene layers were studied using atomic force microscopy and Raman spectroscopy. Graphene multi‐layer was grown by chemical vapor deposition and transferred on InAs/GaAs QDs. It is well known that the presence of a cap layer modifies the size, shape, and density of the QDs. According to the atomic force microscopy study, in contrast to the GaAs capped sample, which induce a dramatic decrease of the density and height of dots, graphene cap layer sample presents a slight influence on the surface morphology and the density of the islands compared with the uncapped one. The difference shown in the Raman spectra of the samples is due to change of strain and alloy disorder effects on the QDs. Residuals strain and the relaxation coefficients have been investigated. All results confirm the best crystalline quality of the graphene cap layer dots sample relative to the GaAs capped one. So graphene can be used to replace GaAs in capping InAs/GaAs dots. To our knowledge, such study has not been carried out until now. Copyright © 2013 John Wiley & Sons, Ltd.