Simplified chemical and radiochemical synthesis of 2-arachidonoyl-glycerol, an endogenous ligand of cannabinoid receptors

Endocannabinoids have emerged as a new class of lipid mediators, with manifold roles in the central nervous system and in the periphery. Several studies have identified 2-arachidonoyl-glycerol (2-AG) as a major endogenous agonist of cannabinoid receptors. Here, the chemical synthesis of 2-AG is reported, along with the synthesis of its tritium-labeled derivative. These unlabeled and radiolabeled compounds are suitable tools for unravelling some metabolic routes and biological activities of 2-AG in various cells and tissues.     

Multielemental analysis of food and agricultural matrixes by inductively coupled plasma-mass spectrometry

The suitability of quadrupole inductively coupled plasma-mass spectrometry (ICP-MS) for multielemental analysis of food following microwave closed vessel digestion of samples was evaluated in relation to analytical challenges presented by some major food and agricultural matrixes. Fifteen key analytes (Al, As, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Se, Sn, V, Zn) were determined in 9 reference materials representative of 3 major groups of staple foods (cereals, seafood, and meat). For all measurements, the method of external calibration was used and Rh was selected as internal standard. Matrix-induced interferences were evaluated for each material, and suitable methods to overcome them were applied. Spectral interferences caused by C, Cl, and Ca content of digestates were quantitated and corrected by entering a simple system of mathematical correction equations into the instrument software before each analytical run. Full mastering of interferences together with adoption of a series of measures to control the reliability of analytical measurements produced accurate results for all the analytes. A standard analytical protocol is outlined for the benefit of both research and routine high-throughput laboratories that perform ICP-MS analyses of food.     

Unprecedented detection of inherent chirality in uranyl-salophen complexes

In complexes with the uranyl dication salophen ligands are highly puckered. This implies that non-symmetrically substituted uranyl-salophen derivatives exist in principle as a pair of enantiomers. However, due to easy disrotations about the bonds connecting the phenoxide units to the imine carbons, the rate of interconversion between enantiomeric forms of simple, sterically unhindered compounds is extremely fast. Bulky substituents in appropriate positions decrease the interconversion rate and make this novel type of inherent chirality detectable by 1H and 13C NMR.     

Palladium-catalyzed reaction of aryl iodides with acetic anhydride. A carbon monoxide-free synthesis of acetophenones

[reaction: see text] The palladium-catalyzed reaction of aryl iodides with acetic anhydride provides a straightforward and experimentally simple carbon monoxide-free route to acetophenones. The reaction tolerates a wide range of functionalized aryl iodides. Acetophenones are isolated in excellent yield with a variety of neutral, slightly electron-rich, and slightly electron-poor aryl iodides, whereas moderate yields are obtained with aryl iodides containing strongly electron-withdrawing substituents.     

Calorimetric determination of the acidic character of amorphous and crystalline aluminosilicates

Aluminosilicates can present different structures such as crystalline true zeolite molecular sieves or amorphous silica–aluminas. With a large surface area available, both can be involved as catalysts, adsorbents or catalyst supports, and the determination of their surface acidic properties is an important parameter in the study of such materials.

The number, strength and strength distribution of the acidic sites were determined using microcalorimetry linked to a volumetric line. Ammonia was used as a basic probe molecule. The adsorption temperatures ranged from 353 K up to 473 K. The samples consisted of two amorphous silica–aluminas (Si/Al ≈ 6.5) and three microporous zeolites H-β, H-ZSM-5 and H-MCM-22 with similar Si/Al ratios (Si/Al ≈ 13).

The differential heats of ammonia adsorption versus coverage and the corresponding isotherms are given. The H-ZSM-5, H-MCM-22, H-β samples display a plateau of constant adsorption heats near 150 kJ mol⁻¹, while the silica–alumina samples present continuously decreasing heats from 150 kJ mol⁻¹ at zero coverage to 40 kJ mol⁻¹ at high coverage, due to their surface heterogeneity. For amorphous silica–aluminas, the number of acid sites is dependent of the aluminum distribution at the surface.

The differences observed in the adsorption behavior of ammonia over the three zeolites arise from differences in their morphology, i.e. the total free volumes, pore geometries and electric field gradients at the adsorption sites. The adsorption isosteres have also been calculated from the adsorption isotherms, and the isosteric heats of adsorption have been compared with the heats measured by calorimetry.     

Metal ion catalysis in the beta-elimination reactions of N-[2-(4-pyridyl)ethyl]quinuclidinium and N-[2-(2-pyridyl)ethyl]quinuclidinium in aqueous solution

Catalysis of the beta-elimination reaction of N-[2-(4-pyridyl)ethyl]quinuclidinium (1) and N-[2-(2-pyridyl)ethyl]quinuclidinium (2) by Zn(2+) and Cd(2+) in OH(-)/H(2)O (pH = 5.20-6.35, 50 degrees C, and mu = 1 M KCl) has been studied. In the presence of Zn(2+), the elimination reactions of both isomers occur from the Zn(2+)-complexed substrates (C). The equilibrium constants for the dissociation of the Zn(2+)-complexes are as follows: K(d) = 0.012 +/- 0.003 M (isomer 1) and K(d) = 0.065 +/- 0.020 M (isomer 2). The value of k(C)(H2O) for isomer 1 is 4.81 x 10(-6) s(-1). For isomer 2 both the rate constants for the "water" and OH(-)-induced reaction of the Zn(2+)-complexed substrate could be measured, despite the low concentration of OH(-) in the investigated reaction mixture [k(C)H2O)= 1.97 x 10(-6) s(-1) and k(C)(OH-)= 21.9 M(-1) s(-1), respectively]. The measured metal activating factor (MetAF), i.e., the reactivity ratio between the complexed and the uncomplexed substrate, is 8.1 x 10(4) for the OH(-)-induced elimination of 2. This high MetAF can be compared with the corresponding proton activating factor (Alunni, S.; Conti, A.; Palmizio Errico, R. J. Chem. Soc., Perkin Trans. 2 2000, 453), PAF = 1.5 x 10(6) and is in agreement with an E1cb irreversible mechanism (A(xh)D(E)* + D(N)) (Guthrie, R. D.; Jencks, W. P. Acc. Chem. Res. 1989, 22, 343). A value of k(C)(H2O)>or= 23 x 10(-7) s(-1) is estimated for the Cd(2+)-complexed isomer 2, while catalysis by Cd(2+) has not been observed for isomer 1.     

N-Nosyl-α-amino acids in solution phase peptide synthesis

A highly efficient and practical synthesis of peptides in solution phase has been developed. The procedure is based on the use of p-nitrobenzenesulfonyl (nosyl) group for the protection of the amino function of α-amino acids. Every step of the procedure, protection of the amino function by the nosyl group, formation of the peptide bond, and removal of the sulfonamide group, is characterized by high yields and excellent purity of the final products. The described strategy allows the preparation of short peptide sequences keeping the chiral integrity of amino acid precursors. Compatibility of nosyl group with the side-chain protecting groups used in Fmoc-based strategy is demonstrated. The method here presented is an alternative strategy that could provide advantages for future peptide synthesis.     

Multivariate calibration techniques applied to the spectrophotometric analysis of one-to-four component systems

The UV spectrophotometric analysis of a multicomponent mixture containing paracetamol, caffeine, tripelenamine and salicylamide by using multivariate calibration methods, such as principal component regression (PCR) and partial least-squares regression (PLS), was described. The calibration set was based on 47 reference samples, consisting of quaternary, ternary, binary and single-component mixtures, with the aim to develop models able to predict the concentrations of unknown samples containing as many as one-to-four components. The calibration models were optimized by an appropriate selection of the number of factors as well as wavelength ranges to be used for building up the data matrix and excluding any information about the interfering excipients included in pharmaceutics. The PCR and PLS models were compared and their predictive performance was inferred by a successful application to the assays of synthetic mixtures and pharmaceutical formulations.     

Accurate mass measurements by Fourier transform mass spectrometry in the study of advanced glycation end products/peptides

The Maillard reaction occurring between sugars and amino groups is important in living systems. When amino groups belonging to protein chains are involved, the Maillard reaction has been invoked as responsible for protein cross-linking and the production of 'toxic' compounds. The reaction leads to the production of a heterogeneous group of substances, usually called advanced glycation end products (AGEs). Classical analytical approaches, such as spectroscopic (ultraviolet, fluorescence) and mass spectrometric (matrix-assisted laser desorption/ionization, liquid chromatography/electrospray ionization mass spectrometry) methods, have shown that the digestion mixture is highly complex. However, there are clear differences between the digestion mixtures of glycated and unglycated human serum albumin (HSA). In the former case, possible glycated peptides belonging to the AGE peptide class may be identified. Tandem mass spectrometric experiments on selected species seemed to be promising as regards structural information, but it was thought of interest to undertake the present investigation, based on liquid chromatography/electrospray ionization Fourier transform mass spectrometry, in order to obtain definitive results on their elemental composition. Using this approach, about 20 glycated peptides were detected and their possible structures were postulated by examining the known sequence of HSA.     

Studies on structure characterization of tryptophan melanin: Comparison between filament and curie-point pyrolysis gas chromatography/mass spectrometry

Structural studies of a synthetic melanin, obtained by means of performic acid oxidation of tryptophan, were carried out by pyrolysis gas chromatography/mass Spectrometry (Py-GC/MS). To identify the best pyrolysis conditions, both Curie-point pyrolysis and filament pyrolysis were employed and the effects of pyrolysis temperatures and times were studied. Using the first approach, various compounds were identified: toluene, ethylbenzene, styrene, indole, methylindole, ethylindole, phenol, cresol and ethylphenol. Using filament pyrolysis some interesting differences could be observed. Whereas toluene, ethylbenzene, phenol, cresol and methylindole were found, neither indole nor ethylindole was detected. Instead, new pyrolysis products were evident, such as methylpyrrole and indolin-2-one. Hence filament pyrolysis seems to activate different thermal decomposition pathways of the melanin under study. It is suggested that tryptophan melanin is a polymer containing indole and hydroxyindole derivatives as subunits.