Elucidation of the Mechanism of Enhanced Insulin Uptake and Release from pH Responsive Hydrogels

Summary: Environmentally responsive hydrogels composed of poly(methacrylic acid-g-ethylene glycol) (P(MAA-g-EG)) have shown promise for oral insulin delivery due to their pH responsive complexation behavior. A series of hydrogel formulations were polymerized with varying amounts of crosslinker and varying monomer volume fraction. The mesh size of the network depended primarily on pH, varying from 8.0 to 27.2 nm. Insulin loading efficiency varied directly with crosslink density, ranging from 42.7 to 84.9% of available insulin loaded into the hydrogels. The release of insulin was performed with each polymer formulation at 5 pH levels ranging from 2.7 to 6.8. Insulin release was less than 20% for all formulations tested with insulin for the duration of the 3 hour release study for all pH levels considered except when the pH was 6.8, at which point the release occurred as a burst. Loading studies performed with insulin glargine, an insulin analog with an increased pI, showed the same trends as native insulin. However, the release of insulin glargine only occurred at a pH level above that of the pI of the protein. These results indicate that hydrogen bonds and ionic interactions between the protein and P(MAA-g-EG) may strongly influence its loading and release behavior in vitro.     

The Critical Fugacity for Surface Adsorption of Self-Avoiding Walks on the Honeycomb Lattice is {1+\sqrt{2}}

In 2010, Duminil-Copin and Smirnov proved a long-standing conjecture of Nienhuis, made in 1982, that the growth constant of self-avoiding walks on the hexagonal (a.k.a. honeycomb) lattice is ${\mu=\sqrt{2+\sqrt{2}}}$ . A key identity used in that proof was later generalised by Smirnov so as to apply to a general O(n) loop model with ${n\in [-2,2]}$ (the case n = 0 corresponding to self-avoiding walks). We modify this model by restricting to a half-plane and introducing a surface fugacity y associated with boundary sites (also called surface sites), and obtain a generalisation of Smirnov’s identity. The critical value of the surface fugacity was conjectured by Batchelor and Yung in 1995 to be ${y_{\rm c}=1+2/\sqrt{2-n}}$ . This value plays a crucial role in our generalized identity, just as the value of the growth constant did in Smirnov’s identity. For the case n = 0, corresponding to self-avoiding walks interacting with a surface, we prove the conjectured value of the critical surface fugacity. A crucial part of the proof involves demonstrating that the generating function of self-avoiding bridges of height T, taken at its critical point 1/μ, tends to 0 as T increases, as predicted from SLE theory.     

Effect of surface corrugation on low temperature phases of adsorbed (p-H2)7: A quantum path integral Monte Carlo study

By using path integral Monte Carlo simulations coupled to Replica Exchange algorithms, various phases of (p-H₂)₇ physically adsorbed on a model graphite surface were identified at low temperatures. At T=0.5 K$T=0.5\text{K}$, the expected superfluid phase was observed for flat and slightly corrugated surfaces. At intermediate and high corrugations, a “supersolid” phase in C_7/16 registry and a solid phase in C_1/3 registry were observed, respectively. At higher temperatures, the superfluid is converted to a fluid and the “supersolid” to a solid.     

Decomposition of in vivo spatially offset Raman spectroscopy data using multivariate analysis techniques

The decomposition of spatially offset Raman spectra for complex multilayer systems, such as biological tissues, requires advanced techniques such as multivariate analyses. Often, in such situations, the decomposition methods can reach their limits of accuracy well before the limits imposed by signal‐to‐noise ratios. Consequently, more effective reconstruction methods could yield more accurate results with the same data set. In this study we process spatially offset Raman spectroscopy (SORS) data with three different multivariate techniques (band‐target entropy minimization (BTEM), multivariate curve resolution and parallel factor analysis (PARAFAC)) and compare their performance when analysing a spectrally challenging plastic model system and an even more challenging problem, the analysis of human bone transcutaneously in vivo. For the in vivo measurements, PARAFAC's requirement of multidimensional orthogonal data is addressed by recording SORS spectra both at different spatial offsets and at different anatomical points, the latter providing added dimensionality through the variation of skin/soft tissue thickness. The BTEM and PARAFAC methods performed the best on the plastic system with the BTEM more faithfully reconstructing the major Raman bands and PARAFAC the smaller more heavily overlapped features. All three methods succeeded in reconstructing the bone spectrum from the transcutaneous data and gave good figures for the phosphate‐to‐carbonate ratio (within 2% of excised human tibia bone); the PARAFAC gave the most accurate figure for the mineral‐to‐collagen ratio (20% less than excised human tibia bone). Previous studies of excised bones have shown that certain bone diseases (such as osteoarthritis, osteoporosis and osteogenesis imperfecta) are accompanied by compositional abnormalities that can be detected with Raman spectroscopy, the utility of a technique which could reconstruct bone spectra accurately is manifest. The results have relevance on the use of SORS in general. © 2014 Crown copyright. Journal of Raman Spectroscopy published by John Wiley & Sons, Ltd.     

Comparison between geometrically focused pulses versus filaments in femtosecond laser ablation of steel and titanium alloys

Kerr self-focusing of high-power ultrashort laser pulses in atmosphere may result in a structure or structures of high intensity that can propagate over long distances with little divergence. Filamentation has garnered significant interest in the nonlinear optics community due to its unique properties. Salient features of filaments include a central region of intense laser power (greater than the ionization threshold of the propagation medium) and a low temperature plasma column that lasts up to nanoseconds in duration after the passage of the laser pulse. Steel and titanium samples are ablated by filaments and by sharply focused sub-picosecond laser pulses. We then performed metrology on the samples to compare the ablation features in addition to modeling of the plasma ablation process. Ablation with filaments leads to a wider range of material responses as compared to ablation with sharply focused pulse. This results in potential complications for applications of filament ablation that depends on the rate of material removal and spectroscopic analysis.     

Characterization of VX on concrete using ion trap secondary ionization mass spectrometry

The nerve agent VX (O-ethyl S-2-diisopropylaminoethyl methyl phosphonothiolate) was analyzed on the surface of concrete samples using an ion trap secondary ion mass spectrometer (IT-SIMS). It was found that VX could be detected down to an absolute quantity of 5 ng on a concrete chip, or to a surface coverage of 0.0004 monolayers on crushed concrete. To achieve these levels of detection, the m/z 268-->128 ion fragmentation was measured using MS2, where m/z 268 corresponds to [VX + H]+, and 128 corresponds to a diisopropylvinylammonium isomer, that is formed by the elimination of the phosphonothiolate moiety. Detection at these levels was accomplished by analyzing samples that had been recently exposed to VX, i.e., within an hour. When the VX-exposed concrete samples were aged, the SIMS signature for intact VX had disappeared, which signaled the degradation of the compound on the concrete surface. The VX signature was replaced by ions which are interpreted in terms of VX degradation products, which appear to be somewhat long lived on the concrete surface. These compounds include ethylmethylphosphonic acid (EMPA), diisopropyl taurine (DIPT), diisopropylaminoethanethiol (DESH), bis(diisopropylaminoethane) disulfide [(DES)2], and a particularly tenacious compound that may correspond to diisopropylvinylamine (DIVA), or an isomer thereof. It was found that the thiolamine-derived degradation products DIPT, DESH, and (DES)2 were removed with isopropyl alcohol extraction. However, the DIVA-related degradation product was observed to strongly adhere to the concrete surface for longer than one week. Although quantitation was not possible in this set of experiments, the results clearly show the rapid degradation of VX on concrete, as well as the surface sensitivity of the IT-SIMS for intact VX and its adsorptive degradation products.     

Ionic-liquid-mediated active-site control of MoS2 for the electrocatalytic hydrogen evolution reaction

The layered crystal MoS(2) has been proposed as an alternative to noble metals as the electrocatalyst for the hydrogen evolution reaction (HER). However, the activity of this catalyst is limited by the number of available edge sites. It was previously shown that, by using an imidazolium ionic liquid as synthesis medium, nanometre-size crystal layers of MoS(2) can be prepared which exhibit a very high number of active edge sites as well as a de-layered morphology, both of which contribute to HER electrocatalytic activity. Herein, it is examined how to control these features synthetically by using a range of ionic liquids as synthesis media. Non-coordinating ILs with a planar heterocyclic cation produced MoS(2) with the de-layered morphology, which was subsequently shown to be highly advantageous for HER electrocatalytic activity. The results furthermore suggest that the crystallinity, and in turn the catalytic activity, of the MoS(2) layers can be improved by employing an IL with specific solvation properties. These results provide the basis for a synthetic strategy for increasing the HER electrocatalytic activity of MoS(2) by tuning its crystal properties, and thus improving its potential for use in hydrogen production technologies.     

Tuning the photocatalytic activity of CdS nanocrystals through intermolecular interactions in ionic-liquid solvent systems

Synthetic solvent systems for the fine-tuned preparation of CdS nanocrystallites, active in visible-light photocatalytic hydrogen production, were studied. To control crystallite size and spectral properties, the CdS crystals were synthesised by using different solvent systems, containing a series of tetrabutylammonium amino carboxylate ionic liquids as the crystal-growth control agents. Six samples of CdS, all with similar physical and spectral properties, exhibited greatly varying photocatalytic activity, with the most active sample outperforming the least active one by almost 60%. To rationalise this effect, the intermolecular interactions of the synthesis solvent system with the growing CdS nanocrystallites were characterised by using the Reichart betaine dye and the E(T)(N) polarity scale. A correlation was observed between the E(T)(N) values of the solvent system and the photocatalytic activity of the CdS nanocrystallite, suggesting that the hydrogen-bond-donating ability and/or dipolarity/polarisability interactions of the solvent system led to the preferential formation of active surfaces/surface sites on the CdS crystals.     

Cruciforms' polarized emission confirms disjoint molecular orbitals and excited states

Steady-state and time-resolved polarized spectroscopy studies reveal that electronic excitation to the third excited state of 1,4-distyryl-2,5-bis(arylethynyl)benzene cruciforms results in fluorescence emission that is shifted an angle of ca. 60°. This result is consistent with quantum chemical calculations of the lowest electronic excited states and their transition dipole moments. The shift originates from the disjointed nature of the occupied molecular orbitals being localized on the different branches of the cruciforms.