A neutron scattering study of strong-symmetric hydrogen bonds in potassium and cesium hydrogen bistrifluoroacetates: Determination of the crystal structures and of the single-well potentials for protons

The crystal structures of potassium and cesium bistrifluoroacetates, KH(CF(3)COO)(2) and CsH(CF(3)COO)(2), respectively, were determined at room and cryogenic temperatures with the single crystal neutron diffraction technique. The crystals belong to the monoclinic space groups, I2a and A2a, respectively, and there is no evidence of any structural phase transition. In both crystals, trifluoroacetate entities in centrosymmetric dimers are linked by very short hydrogen bonds lying across a center of inversion. The thermal parameters provide no evidence of any double minimum potential for hydrogen bond protons. Single-minimum potentials were determined via best fitting to the inelastic neutron scattering spectral profiles of the stretching vibrations. They comprise a narrow well for the ground state and a very broad quasiharmonic well for excited states. The spread out of the wave functions of these states shows that protons are no longer confined between the oxygens. Presumably, they are attracted by the lone pairs of oxygen atoms. These potentials emphasize the covalent nature of the OO bond and the ionic character of the hydrogen bond proton.     

Photopolymerized injectable RGD-modified fumarated poly(ethylene glycol) diglycidyl ether hydrogels for cell growth

In this study, photopolymerized hydrogels of fumarated poly(ethylene glycol) diglycidyl-co- poly(ethylene glycol) diacrylate have been synthesized and modified with cell adhesion peptide, Arg-Gly-Asp (RGD). The structural and mechanical properties of the hydrogels are found to be poly(ethylene glycol) diacrylate (PEGDA) dependent. The percentage of gelation is increased from 72 to 89 wt.-% when the amount of the crosslinker co-monomer (PEGDA) in the hydrogel formulation is increased from 20 to 40 wt.-%. In the present case, the equilibrium mass swelling is decreased from 216 to 93%. The viscosities of the uncured formulations have also been measured and likewise, the results were influenced by the increasing amount of PEGDA that reduced the value from 83 to 36 cP. The compressive modulus of the prepared hydrogels was improved with the addition of the PEGDA. Cell growth experiments have been performed by comparing the properties of the hydrogels with and without RGD units. The results show that RGD units enhance the adhesion of cells to the surface of the hydrogels. SEM-EDS studies reveal that nitrogen and calcium are produced on the osteoblast-seeded surface of the scaffold within the culture time period. [Figure: see text].     

Theory and practice of enzyme bioaffinity electrodes. Chemical, enzymatic, and electrochemical amplification of in situ product detection

The two articles in this series are dedicated to bioaffinity electrodes with in situ detection of the product of the enzyme label after recognition by its conjugate immobilized on the electrode. Part 1 was devoted to direct electrochemical detection, whereas the present contribution deals with homogeneous chemical and enzymatic amplification of the primary electrochemical signal. The theoretical relationships that are established for these modes of amplification are applied to the avidin-biotin recognition in a system that involves alkaline phosphatase as enzyme label and 4-amino-2,6-dichloro-phenyl phosphate as substrate, generating 2,6-dichloro-4-aminophenol as electrochemically active product. Chemical amplification then results from the addition of NADH, which reduces the 2,6-dichloro-quinonimine resulting from the electrochemical oxidation of 2,6-dichloro-4-aminophenol. An increased amplification is obtained when the reduction of 2,6-dichloro-quinonimine involves diaphorase in solution with NADH as substrate. The excellent agreement between theoretical predictions and experimental data required a detailed theoretical analysis and the independent determination of the key kinetic parameters of the system. The theoretical analysis was extended to monolayer and multilayered films of auxiliary enzyme as well as to electrochemical amplification by means of closely spaced dual electrodes so as to offer a rational comparative panorama of the amplification capabilities of the various possible strategies. Confinement of the profile of the product, and/or its oxidized form, in the vicinity the electrode surface appears as a key parameter of amplification.     

Theory and practice of enzyme bioaffinity electrodes. Direct electrochemical product detection

The use of enzyme labeling techniques to convert biorecognition events into high sensitivity electrochemical signals may follow two different strategies. One, in which the current is the electrocatalytic response of a redox couple serving as cosubstrate to a redox enzyme label and another that consists in the detection of an electrochemically active product of the enzyme label. The theoretical relationships that link, in the latter case, the electrochemical current response to the amount of recognized labeled target analyte are established for steady-state diffusion-convection chronoamperometric regimes. Two governing parameters thus emerge. One measures the Michaelis-Menten competition in the enzyme kinetics. The other characterizes the competition between the enzymatic kinetics and the diffusion of the substrate. The electrochemical response is finally related to the labeled target analyte concentration in solution through the recognition isotherm. The direct electrochemical product detection thus provides a route to the characteristics of the recognition isotherm, which serves as a calibration curve in analytical applications. The establishment of further theoretical relationships allows one to surmise the increase in sensitivity that may be obtained by using cyclic voltammetry instead of steady-state chronoamperometry in standard electrochemical cells or by accumulation of the enzyme-product in cells of small volume/surface ratios. The theoretical predictions are tested with the example of the avidin-biotin recognition process in a system that involves alkaline phosphatase as enzyme label and 4-amino-2,6-dichlorophenyl phosphate as substrate, generating 4-amino-2,6-dichlorophenol as electrochemically active product. The advantages of the dichloro-substitution are discussed. The theoretical analysis is a requisite for a rational and realistic discussion of the analytical performances of the steady-state chronoamperometric and cyclic voltammetric approaches. These are shown to compare favorably with the best heterogeneous bioaffinity assays so far reported.     

Simultaneous on-line pre-concentration and determination of trace metals in environmental samples by flow injection combined with inductively coupled plasma mass spectrometry using silica gel modified with niobium(V) oxide

This work presents the development of an on-line pre-concentration system for simultaneous determination of Cd, Cu, Ni, V, Zn, Co and Pb in aqueous environmental samples and detection by inductively coupled plasma mass spectrometry. The system is based on cationic retention of the analytes onto a mini-column filled with silica gel modified with niobium(V) oxide. The effects of chemicals and flow variables have been investigated. The optimized operating conditions, selected as a compromise between sensitivity and analytical frequency were: sample pH 7.0, sample flow rate of 6.0mL min(-1), eluent flow rate of 2.0mL min(-1), and eluent (HNO(3)) concentration of 2.5mol L(-1). The relative standard deviation (n=7), enrichment factor and linear working range were 0.8-4.5%, 23.3-37.2 and 0.05-25.0microg L(-1), respectively. Limits of detection were between 0.01 and 0.03microg L(-1). The accuracy of the proposed method was checked with certified materials (NASS-4, NASS-5, CASS-4 and SRM 1643e). Values obtained were in accordance with those reported for the certified materials. Recovery was found to be in the range of 90-110% for a suit of water samples with variable matrices (seawater, tap water and ground water) collected in Florianopolis, Brazil.     

EPR study of Cu(2+)-doped tetraaqua-di(nicotinamide)Co(II) saccharinate single crystals

The electron paramagnetic resonance spectra of Cu(2+) impurities in [Co(nicotinamide)(2)(H(2)O)(4)](saccharinate)(2) single crystals have been studied at ambient temperature in three mutually perpendicular planes. The angular variation of the spectra shows that the Cu(2+) ion substitutes the Co(2+) site in the lattice. The EPR spectra of Cu(2+) ions are characteristic of tetragonally elongated octahedral site. The spin-Hamiltonien parameters were obtained from the single crystal EPR analysis. The ground-state wave function of Cu(2+) ion in the lattice has been constructed.     

Theoretical determination of rate constants for vibrational relaxation and reaction of OH(X 2Pi, v = 1) with O(3P) atoms

Collisions of the vibrationally excited OH(v = 1) molecule with atomic oxygen are investigated theoretically using a coupled-states, statistical capture (CS-ST) model. Vibrational relaxation can occur by inelastic scattering, and the vibrationally excited molecule can also be removed by reaction to form O(2) in both the ground (X (3)Sigma(g)(-)) and first excited (a (1)Delta(g)) state. In the former case, reaction occurs on the lowest potential energy surface of (2)A(") symmetry, and, in the latter case, by reaction on the lowest potential energy surface of (2)A(') symmetry. We report new ab initio potential energy surfaces for both these states in the product and reactant regions necessary for application of the coupled-states, statistical method. Comparison with exact, reactive scattering calculations within the J-shifting approximation indicate that the CS-ST rate constants for removal of OH(v = 1) can be expected to be reasonably accurate. Our calculated rate constants at 300 K agree well with the experimental results of Khachatrian and Dagdigian [Chem. Phys. Lett. 415, 1 (2005)]. Reaction to yield O(2) (X (3)Sigma(g)(-)) is the dominant removal pathway. At subthermal temperatures, the rate constants for the various vibrational quenching processes all increase down to T approximately = 60 K and then decrease at lower temperature.     

Can electrospray ionization help the characterization of iron gall inks? Investigation on the interactions of gallic acid with iron ions in aqueous solutions

In the present work, an investigation has been conducted by electrospray ionization (ESI) experiments to characterize the structures of iron gall ink complexes in solution. Simple mono and polyphenolic acid molecules added to iron sulfate salts were chosen to model the recipes of ink composition. Theoretical calculations have been used (1) to determine the stability of the ionic complexes generated in the gas phase, (2) to explain which structures are more likely generated in the electrospray ion source, and (3) to determine which mechanisms are likely involved in their formation. Fragmentation pathways of the derived structures have also been investigated and rationalized to facilitate the interpretation of the data obtained under collisionally induced dissociation (CID) conditions.The present study confirms the assumption that ESI experiments with ions that are preformed in solution must be considered carefully. As a matter of fact, the study of ion formation mechanisms in the ion source is necessary to establish relationships between the ion structures in the condensed phase and the gas phase.     

The Synthesis of New Triazole Ligands and Determination of Complex Stability Constants with Transition Metal Cations in Aqueous Media

Six new triazole compounds were synthesized. These compounds containing the substituted benzylidenamino group were obtained by reaction of 3-(pyridine-4-yl)-5-p-tolyl-4-amino-4H-l,2,4-triazole 1 with the corresponding aldehyde. The reduced forms were prepared with NaBH₄ in methanol. The structures of the compounds were determined by IR, ¹H NMR, and ¹³C NMR spectral data, and their interaction with cations such as Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Ba²⁺, Sr²⁺, Ca²⁺, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ were investigated by using UV-visible spectrophotometry. Of the tested metal cations, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Pb²⁺ and Ag⁺ complexed with the ligands. The complex stability constants (log ₁₀ K) were measured in slightly acidic aqueous media at 25.0±0.1 °C. These stability constants were determined by measuring the increase in solubility of the nearly insoluble ligand molecule due to complex formation with a soluble cation, and this method is discussed. It was found that the position of chlorine atoms on the benzene ring strongly affects the complexation of Cu²⁺ ion with these ligands.     

Understanding the two-step spin-transition phenomenon in Iron(II) 1D chain materials

Three analogous one dimensional (1D) polymeric iron(II) spin crossover (SCO) materials containing the new ligand 4,6-bis(2',2'-pyridyl)pyrazine (bdpp) have been comprehensively characterised magnetically (thermal and light-induced) and structurally. Within this series are two polymorphs of the formula [Fe(NCS)(2)(bdpp)], 1 and 2 a, which differ magnetically in that phase 1 undergoes a full two-step SCO (T(1/2(1))=135 K and T(1/2(2))=90 K) whereas phase 2 a remains high spin (HS) over all temperatures. The central distinction between these two materials lies in the presence of intermolecular pi-pi interactions generated by the crystal packing in 1, which are absent in 2 a. The isostructural selenocyanate analogue of 2 a, [Fe(NCSe)(2)(bdpp)], 2 b, undergoes a full two-step SCO (T(1/2(1))=200 K and T(1/2(2))=125 K). Structural analyses of 1 and 2 b at a range of temperatures provide deep insight into their two-step SCO nature. Structural analysis of 1 at 25 K (1(LS-LS)), 123 K (1(LS-HS)) and 250 K (1(HS-HS)) reveals two distinct iron(II) centres at each temperature, with ordered, alternating HS and LS (low spin) sites at the intermediate plateau (IP) temperatures. In contrast, structural analysis of 2 b at 90 K (2 b(LS)), 150 K (2 b(LS/HS)) and 250 K (2 b(HS)) reveals one unique iron(II) centre at each temperature with an "averaged" LS/HS character at the IP temperature. Weak planes of diffuse scattering in the single-crystal X-ray diffraction patterns were observed for this phase at 90 and 150 K, indicating that 1D long range ordering of alternating HS/LS iron(II) centres occurs along the 1D coordination chains, but that there is no correlation between chains. The lack of observable diffuse scattering at 250 K suggests that the onset of the 1D structural ordering in the chain direction corresponds to the first step of the SCO and that this structural transition is electronically driven. The photomagnetic properties of both 1 and 2 b have been investigated and show approximately 62 and 53 % photo-excitation of a HS metastable state at low temperatures and T(LIESST) values of 55 and 49 K, respectively. Relaxation studies on the HS fraction in 2 b fitted well to a stretched exponential model with kinetic parameters indicative of weak cooperativity.