Mechanistic studies on the formation and reactivity of dioxygen adducts of diiron complexes supported by sterically hindered carboxylates

Dioxygen activation by enzymes such as methane monooxygenase, ribonucleotide reductase, and fatty acid desaturases occurs at a nonheme diiron active site supported by two histidines and four carboxylates, typically involving a (peroxo)diiron(III,III) intermediate in an early step of the catalytic cycle. Biomimetic tetracarboxylatodiiron(II,II) complexes with the familiar "paddlewheel" topology comprising sterically bulky o-dixylylbenzoate ligands with pyridine, 1-methylimidazole, or THF at apical sites readily react with O(2) to afford thermally labile peroxo intermediates that can be trapped and characterized spectroscopically at low temperatures (193 K). Cryogenic stopped-flow kinetic analysis of O(2) adduct formation carried out for the three complexes reveals that dioxygen binds to the diiron(II,II) center with concentration dependences and activation parameters indicative of a direct associative pathway. The pyridine and 1-methylimidazole intermediates decay by self-decomposition. However, the THF intermediate decays much faster by oxygen transfer to added PPh(3), the kinetics of which has been studied with double mixing experiments in a cryogenic stopped-flow apparatus. The results show that the decay of the THF intermediate is kinetically controlled by the dissociation of a THF ligand, a conclusion supported by the observation of saturation kinetic behavior with respect to PPh(3), inhibition by added THF, and invariant saturation rate constants for the oxidation of various phosphines. It is proposed that the proximity of the reducing substrate to the peroxide ligand on the diiron coordination sphere facilitates the oxygen-atom transfer. This unique investigation of the reaction of an O(2) adduct of a biomimetic tetracarboxylatodiiron(II,II) complex provides a synthetic precedent for understanding the electrophilic reactivity of like adducts in the active sties of nonheme diiron enzymes.     

Molecular rectification: self-assembled monolayers in which donor-(pi-bridge)-acceptor moieties are centrally located and symmetrically coupled to both gold electrodes

Self-assembled monolayers (SAMs) obtained from 1-(10-acetylsulfanyldecyl)-4-[2-(4-dimethylaminophenyl)vinyl]quinolinium iodide exhibit asymmetric current-voltage (I-V) characteristics. The rectification may be reversibly switched: it is suppressed when the film is exposed to HCl vapor, the intramolecular charge-transfer axis being inhibited by protonation, but restored when exposed to NH(3). The behavior is intrinsic to the donor-(pi-bridge)-acceptor moiety, and ambiguity in the assignment has been excluded by matching the alkyl tails on the substrate and contacting STM tip to locate the chromophore midway between the electrodes: Au-S-C(10)H(21)//D-pi-A-C(10)H(20)-S-Au. Films contacted by gold tips exhibit rectification ratios of ca. 18 at +/-1 V, whereas those contacted by pentanethiolate (Au-S-C(5)H(11))- and decanethiolate (Au-S-C(10)H(21))-coated tips have corresponding ratios of ca. 11 and 5, respectively. The I-V curves are different, but when adjusted for thickness the current versus electric field dependence is indistinguishable. Seven dyes are reported: SAMs with sterically hindered D-pi-A moieties, in which the donor and acceptor are twisted out of plane, exhibit rectification, whereas those that are planar or have a weak donor-acceptor combination do not.     

Synthesis of oligonucleotides containing an O-G-alkyl-O-G interstrand cross-link

A methodology to synthesize oligonucleotides containing an alkyl interstrand cross-link between the two O6 atoms of deoxyguanosine has been developed. This cross-link is designed to serve as a stable structural mimic of the lesion formed in duplex DNA with the bifunctional alkylating agent hepsulfam. The O6-alkyl coupling is performed via a Mitsunobu reaction between a nucleoside and mono-protected 1,7-heptanediol. Solid-phase oligonucleotide synthesis using a nucleoside bis-phosphoramidite allows for the assembly of the cross-linked duplex. Sufficient quantities of this cross-linked duplex were obtained for various structural and biological investigations.     

Synthesis of new derivatives of 4-amino-2,4-dihydro-1,2,4-triazol-3-one as potential antibacterial agents

Thirty new 2-substituted-4-amino-5-alkyl or aryl-2,4-dihydro-1,2,4-triazol-3-ones and ten 2-substituted-5-alkyl or aryl-4-(5-nitro-2-furfurylidene)amino-2,4-dihydro-1,2,4-triazol-3-ones were synthesized and characterised by their sharp melting points, elemental analysis, ir and ¹H nmr spectra. These new derivatives of 5-nitro-2-furaldehyde were screened for their antibacterial activities. Most of the compounds showed good activity against one test organism, Staphylococcus aureus. For a few compounds, C.M.I. ranged from 4 to 8 μg/ml (higher results than nitrofurantoin).     

Electrospray ionization mass spectrometry studies of noncovalent myosin VI complexes reveal a new specific calmodulin binding site

Among the myosin superfamily, myosin VI differs from all others by a reverse directionality and a particular motility. Little structural information is available for myosin VI. It is known that it binds one calmodulin (CaM) by means of a single "IQ motif" and that myosin VI contains a specific insert located at the junction between the motor domain (MD) and the lever arm, likely to play a critical role for the unusual motility previously observed. Electrospray ionization mass spectrometry (MS) was used to determine the CaM and Ca2+ stoichiometries in several myosin VI constructs. In particular, the experimental conditions required for the observation of multiprotein/Ca2+ noncovalent assemblies are detailed for two truncated MD constructs (less than 20 kDa) and for three full MD constructs (more than 90 KDa). The specificity of the detected stoichiometries is discussed for each construct and the resolving power of Time of Flight mass spectrometry is stressed, in particular for the detection of metal ions binding to high molecular weight complexes. MS reveals a new CaM binding site for myosin VI and highlights a different behavior for the five myosin VI constructs versus Ca2+ binding. In addition to these stoichiometry based experiments, gas-phase dissociation analyses on intact complexes are described. They reveal that Ca2+ transfer between protein partners occurs during the dissociation process for one construct with a full MD. Charge-transfer and dissociation behavior has allowed to draw structural assumptions for the interaction of the MD with the CaM N-terminal lobe.     

Integramides A and B, two novel non-ribosomal linear peptides containing nine C(alpha)-methyl amino acids produced by fungal fermentations that are inhibitors of HIV-1 integrase

[structure: see text]. Integramides A and B are two novel 16-mer linear peptides rich in C(alpha)-methyl amino acids that were isolated from fungal extracts of Dendrodochium sp. by employing a bioassay-guided isolation procedure using recombinant HIV-1 integrase. The structure and stereochemistry were elucidated by a combination of 2D NMR and ESI- and FAB-MS including MS/MS studies and by Marfey's method. Integramides A and B inhibited the coupled reaction of HIV-1 integrase with IC50 values of 17 and 10 microM, respectively.     

'Boomerang'-like insertion of a fusogenic peptide in a lipid membrane revealed by solid-state 19F NMR

Solid state (19)F NMR revealed the conformation and alignment of the fusogenic peptide sequence B18 from the sea urchin fertilization protein bindin embedded in flat phospholipid bilayers. Single (19)F labels were introduced into nine distinct positions along the wild-type sequence by substituting each hydrophobic amino acid, one by one, with L-4-fluorophenylglycine. Their anisotropic chemical shifts were measured in uniaxially oriented membrane samples and used as orientational constraints to model the peptide structure in the membrane-bound state. Previous (1)H NMR studies of B18 in 30% TFE and in detergent micelles had shown that the peptide structure consists of two alpha-helical segments that are connected by a flexible hinge. This helix-break-helix motif was confirmed here by the solid-state (19)F NMR data, while no other secondary structure (beta-sheet, 3(10)-helix) was compatible with the set of orientational constraints. For both alpha-helical segments we found that the helical conformation extends all the way to the respective N- and C-termini of the peptide. Analysis of the corresponding tilt and azimuthal rotation angles showed that the N-terminal helix of B18 is immersed obliquely into the bilayer (at a tilt angle tau approximately 54 degrees), whereas the C-terminus is peripherally aligned (tau approximately 91 degrees). The azimuthal orientation of the two segments is consistent with the amphiphilic distribution of side-chains. The observed 'boomerang'-like mode of insertion into the membrane may thus explain how peptide binding leads to lipid dehydration and acyl chain perturbation as a prerequisite for bilayer fusion to occur.     

Processes associated with ionic current rectification at a 2D-titanate nanosheet deposit on a microhole poly(ethylene terephthalate) substrate

Films of titanate nanosheets (approx. 1.8-nm layer thickness and 200-nm size) having a lamellar structure can form electrolyte-filled semi-permeable channels containing tetrabutylammonium cations. By evaporation of a colloidal solution, persistent deposits are readily formed with approx. 10-μm thickness on a 6-μm-thick poly(ethylene-terephthalate) (PET) substrate with a 20-μm diameter microhole. When immersed in aqueous solution, the titanate nanosheets exhibit a p.z.c. of − 37 mV, consistent with the formation of a cation conducting (semi-permeable) deposit. With a sufficiently low ionic strength in the aqueous electrolyte, ionic current rectification is observed (cationic diode behaviour). Currents can be dissected into (i) electrolyte cation transport, (ii) electrolyte anion transport and (iii) water heterolysis causing additional proton transport. For all types of electrolyte cations, a water heterolysis mechanism is observed. For Ca²⁺ and Mg²⁺ions, water heterolysis causes ion current blocking, presumably due to localised hydroxide-induced precipitation processes. Aqueous NBu₄⁺ is shown to ‘invert’ the diode effect (from cationic to anionic diode). Potential for applications in desalination and/or ion sensing are discussed.

     

Quantitative analysis of backbone dynamics in a crystalline protein from nitrogen-15 spin-lattice relaxation

A detailed analysis of nitrogen-15 longitudinal relaxation times in microcrystalline proteins is presented. A theoretical model to quantitatively interpret relaxation times is developed in terms of motional amplitude and characteristic time scale. Different averaging schemes are examined in order to propose an analysis of relaxation curves that takes into account the specificity of MAS experiments. In particular, it is shown that magic angle spinning averages the relaxation rate experienced by a single spin over one rotor period, resulting in individual relaxation curves that are dependent on the orientation of their corresponding carousel with respect to the rotor axis. Powder averaging thus leads to a nonexponential behavior in the observed decay curves. We extract dynamic information from experimental decay curves, using a diffusion in a cone model. We apply this study to the analysis of spin-lattice relaxation rates of the microcrystalline protein Crh at two different fields and determine differential dynamic parameters for several residues in the protein.     

Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)

The preparation and identification of a series of trifluoromethylated and bis(trifluoromethylated) precursors and monomers for bridge substituted trifluoromethylated poly(p-phenylenevinylene) (PPV) is reported. These monomers were prepared in several steps from terephthaldicarboxaldehyde and they contain symmetrical and unsymmetrical combinations of leaving groups and/or polarizers, including chlorides, sulfoxides, sulphones, tosylates and S-methyl (and also O-ethyl) xanthates. The electron withdrawing effect of the trifluoromethyl group dominated the regioselectivity of substitution, thus allowing the convenient and selective formation of unsymmetrically substituted products in high yield.