Fe（Ⅲ）－TEA－5－Br－PADAP－H_2O_2体系中催化波的研究及其应

在０．２ｍｏｌ·Ｌ￣（－１）ＮＨ＿４Ｃｌ－ＮＨ＿３·Ｈ＿２Ｏ底液中，（ｐＨ为９．２６），得到一个极为灵敏的Ｆｅ（Ⅲ）－ＴＥＡ－５－Ｂｒ－ＰＡＤＡＰ－Ｈ＿２Ｏ＿２配合吸附催化波，其峰电位为－０．７１Ｖ（ｖｓ．ＳＣＥ）。铁浓度在１．８×１０￣（－１０）～５．４×１０￣（－６）ｍｏｌ·Ｌ￣（－１）范围内与二阶导数波高呈线性关系。对该极谱波的性质进行了研究，证明是一种配合吸附催化波，并成功地应用于各类水样，钒催化剂中微量或痕量铁的测定。     

Synthesis and aggregation behavior of <Emphasis Type="Italic">N</Emphasis>-succinyl-o-carboxymethylchitosan in aqueous solutions

A simple and novel method was developed to successfully synthesize N-succinyl-O-carboxymethylchitosan (NSOCMCS) using N-acylation of chitosan with succinic anhydride. The NSOCMCS structure was characterized by Fourier transform infrared and ¹H nuclear magnetic resonance. The aggregation behaviors of NSOCMCS were studied using fluorescence spectroscopy, dynamic light scattering, and atomic force microscopy techniques. The critical aggregation concentration of NSOCMCS in water was determined to be 0.2–0.3 mg/ml. The apparent hydrodynamic radium of an NSOCMCS aggregate was dependent on the concentration. The aggregates demonstrated a much swollen association conformation in aqueous solution. The possible aggregation mechanisms for the NSOCMCS in water are discussed. Moreover, a driving force to form an open aggregation morphology was revealed in this study. Aggregation behaviors are important physicochemical properties of NSOCMCS, which impact the potential application in the biomedical field.     

Development of the FTIR properties of nano-structure silica gel doped with different rare earth elements,prepared by sol-gel route

Structural characteristics of pure silica gel (silica-xerogel, SiO₂) and silica gel doped with some rare earth elements (REEs) such as, praseodymium Pr³⁺, and Europium Eu³⁺, Erbium Er³⁺ and Holmium Ho³⁺ ions, with different concentrations ranging from 1 up to 6%, in the form of monolith materials were prepared by sol-gel technique, Using tetra-ethoxysilane as precursor materials, which are of particular interest for sol-gel integrated optics applications. Some structural features of sol-gel derived monolith are analyzed, namely the structure of nano-particle momolith samples, based on X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR). We show that the XRD spectra of α-crystobalite are obtained for the pure samples at 1100°C and even by doping with the four REEs ions.     

The application of chromatography to the analysis of pharmaceutical creams

Summary The application of GLC, HPLC and TLC to the analysis of pharmaceutical creams is discussed with special attention to sample clean-up. The results of the determination of hydrocortisone acetate, salicylic acid, benzoic acid, diethyl stilbestrol, chloramphenicol, diphenhydramine HCl, tretinoin and some cream base components by reversed phase HPLC are given.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Thermal study of CoxZn7-xSb2O12 spinel obtained by pechini method using different alcohols

With the aim of obtaining materials with applications in pigments, Co_xZn_7-xSb₂O₁₂ spinels were synthesized using the Pechini method. This method consists in the formation of a polymeric net, where the metallic cations are homogeneously distributed. In this work, two types of alcohol (ethyl glycol and ethylene glycol) were used for the synthesis of a zinc antimoniate spinel, Co_xZn_7-xSb₂O₁₂ (x=0-7). The materials were characterized by termogravimetry (TG) and differential thermal analysis (DTA). TG results indicated a decrease in total mass loss when cobalt was added to the solution substituting zinc, for samples prepared using the two different alcohols. Decomposition temperatures, obtained by TG and DTA, presented a decreasing behavior as cobalt was added to the material. In relation to the alcohols, all results indicated a better polymerization of the resin when ethylene glycol was used, being the most indicated one for cation immobilization. X-ray diffraction did not show differences between the two alcohols - both presented the spinel phase (Co, Zn)_2.33Sb₀.₆₇O₄. Samples with higher quantity of cobalt also presented ilmenite phase (Co, Zn)Sb₂O₆. This revised version was published online in August 2006 with corrections to the Cover Date.     

Charge compensation dynamics in a soluble copolymer of poly(aniline) and poly(phenylene sulfide)

Poly(phenylene sulfide phenyleneamine), PPSA, is a copolymer of poly(aniline) and poly(phenylene sulfide), soluble in conventional organic solvents as tetrahydrofuran, dimethyl sulfoxide, dimethylformamide, and cyclohexanone. In this research, its electrochemical behavior has been studied in acetonitrile in the presence of different electrolytes, where the loss of electroactivity was observed after few cycles. In this paper, the charge compensation dynamics of PPSA is analyzed through electrochemical quartz crystal microbalance experiments and electroacoustic impedance measurements. Raman spectroscopy data have shown that once the oxidation of the sulfur atom occurs, a loss of electroactivity is observed, being not possible to recover the pristine state of the polymer. Fourier transform infrared (FTIR) and X-ray diffraction (XRD) data obtained for the fully oxidized polymer are consistent with the formation of a networked polymer due to the electrophilic attack of the positive sulfur atom on the activated aromatic rings. Electrochemical quartz crystal microbalance results clearly show that the degree of irreversibility fully depends on the chemical nature of the anions with a negligible participation of the cations of the electrolytic solution. This work is in memoriam of Prof. Dr. Francisco C. Nart, dearest friend and colleague, whose scientific skills and enthusiasm will always be remembered.     

A case of oligomerization on attempted chlorination of an α-hydroxy acetal with the triphenylphosphine tetrachloromethane reagent

Treatment of methyl 3,5-dideoxy-β-$\text{D}$-$\text{erythro}$-pentofuranoside $\text{8}$ with the Ph₃P-CCl₄ reagent gave none of the expected 2-chloro derivative but a mixture of l→2 linked oligosaccharides, $\text{9}$, $\text{10}$ with some higher homologues, terminated by αa 2-chloro-2,3,5-trideoxy-α-$\text{D}$-$\text{threo}$-pentofuranosyl unit at the non reducing end.     

Phase separation in the formation of hollow particles by suspension polymerization for divinylbenzene/toluene droplets dissolving polystyrene

Phase-separation behavior within polymerizing divinylbenzene/toluene droplet dissolving polystyrenes (PS) was investigated to clarify the formation mechanism of the hollow polymer particles by suspension polymerization. No hollow particles were obtained at a low content of low-molecular-weight PS where phase separation occurred at high conversion. On the other hand, hollow particles were obtained at a high content of high-molecular-weight PS where phase separation occurred at low conversion. The phase separation in an early stage of the polymerization, which was promoted by the presence of PS and cross-links of polydivinylbenzene, was a key factor for the formation of the hollow structure.     

Molybdenum(VI) and molybdenum(V) mononuclear and dinuclear complexes with 1,3-diphenyl-1,3-propanedione

Summary The synthesis and the dinuclear or mononuclear nature of several molybdenum(VI) and molybdenum(V) oxocomplexes derived from 1,3-diphenyl-1,3-propanedione (HLL) are described. These complexes were identified by i.r. and electronic spectra, magnetic susceptibility and analytical data, and are assigned the following formulae: [MoO₂(LL)₂], [Mo₂O₅(LL)₂], [Mo₂O₄(LL)₂], [MoOCl(LL)₂], [MoCl₂(LL)] and [MoO(OH)(LL)₂)]. The low magnetic moments of the dinuclear complexes are due, in part, to intramolecular interactions. The i.r. data show that the dionate is bound by two oxygen atoms forming a chelate six-membered ring.