Evaluation of low-dose irradiation on microbiological quality of white carrots and string beans

The minimally processed food provided the consumer with a product quality, safety and practicality. However, minimal processing of food does not reduce pathogenic population of microorganisms to safe levels. Ionizing radiation used in low doses is effective to maintain the quality of food, reducing the microbiological load but rather compromising the nutritional values and sensory property. The association of minimal processing with irradiation could improve the quality and safety of product. The purpose of this study was to evaluate the effectiveness of low-doses of ionizing radiation on the reduction of microorganisms in minimally processed foods. The results show that the ionizing radiation of minimally processed vegetables could decontaminate them without several changes in its properties.     

A novel strategy for the preparation of long chain branching polypropylene and the investigation on foamability and rheology

A novel strategy for introducing long chain branches (LCB) on commercial polypropylene (PP) was described using an extender agent, poly (hexamethylendiamine-guanidine hydrochloride) (PHGH), to couple with glycidyl methacrylate-grafted PP (PP-GMA). The presence of LCB was confirmed by GPC and melt strength measurements in two modified PP samples, MPP-1 and MPP-2. The foamability of LCB PPs and commercially linear PP (EPS) was investigated by foam extrudate. The results showed that the foamability of LCB PPs was significantly improved. To find out the difference in foamability of EPS and LCB PPs, some rheological properties were investigated. In the dynamic shear measurement, it was found that the elastic response of LCB PPs at low frequencies was distinctly enhanced in comparison with that of EPS, implying a presence of a long relaxation time mode that was not revealed in linear PP. The elongational rheology results showed that the strain hardening behaviors of LCB PPs were still intense even at higher strain rate of 1 s^?1; moreover, MPP-2 could sustain larger elongational stress and deformation, which helps to improve the foamability. In step-shear stress relaxation measurements, the fast and slow relaxation processes were observed over the entire ranges of strains, indicating the presence of two different relaxation time modes. Also, the strain dependence of slow damping function became weaker because of the introduction of LCB on linear PP. In addition, it was also found that the rheological behaviors characterizing the long relaxation time mode were further enhanced with the increase of the concentration of PHGH in the melt grafting reactions.     

Thermal transformation of polyacrylonitrile deposited on SBA-15 type silica

Thermogravimetry, diffuse reflectance infrared Fourier transform spectroscopy, and X-ray photoelectron spectroscopy (XPS) were used for the studying of thermally induced structural changes of polyacrylonitrile (PAN) deposited on the surface of SBA-15 type mesoporous silica. Polymer was introduced onto the support by the precipitation polymerization of acrylonitrile in aqueous suspension of SBA-15. Low temperature transformation (to 723?K) of the deposited PAN was analyzed. It was found that at about 523?K, exothermic cyclization of polymer chains to the so-called ladder form of PAN occurred. However, the total cyclization of PAN required higher carbonization temperatures, at which gradual dehydrogenation followed by graphitization was initiated. XPS revealed that the cyclic form of PAN and a relatively large amount of carbonyl species, formed during the carbonization of the PAN/SBA-15 composite at 623?K, were responsible for the high sorption capacity in the methyl?Cethyl ketone (MEK) vapor elimination. The efficiency in the MEK adsorption was also influenced by the content of PAN-derived carbon deposited on the SBA-15 surface.     

Molecular properties of hemicelluloses located in the surface and inner layers of hardwood and softwood pulps

The molecular properties of hemicelluloses located in the surface and inner layers of fibers present in hardwood and softwood pulps, together with the effects of different bleaching processes on these properties, have been investigated in this study. In order to separate the hemicelluloses located in these two layers, fibers were subjected to mechanical peeling and then separated by filtration into surface (filtrate) and inner layer materials. The materials thus obtained were characterized with respect to their polysaccharide compositions and uronic acid contents. The molar mass parameters of the hemicelluloses (extracted by alkali) were determined by employing size-exclusion chromatography in combination with off-line MALDI mass spectrometry. For all of the pulps examined, the relative content of xylan was found to be greater in the surface layer of the fiber than in the corresponding inner layer. The xylan polymers of the surface layer exhibited higher molar masses and lower frequencies of uronic acid side groups than did the xylans in the inner fiber layer. In connection with ozone treatment, hexenuronic acid residues in the surface layer xylan were removed to a greater extent than in the case of the inner layers, indicating a gradient for the reaction with ozone across the fiber wall. The xylan polymer remaining on the surface of the softwood pulps after completion of the chlorine dioxide bleaching process was predominantly uncharged.     

Micellar effect in hydroformylation of high olefin catalysed by water-soluble rhodium complexes associated with sulfonated diphosphines

High linear alkenes (1-octene and 1-decene) have been hydroformylated using water-soluble rhodium complexes associated with sulfonated diphosphines in the presence of ionic surfactants or methanol. In all cases, the hydroformylation activities were higher than in experiments without additives. The selectivity in aldehydes was higher when we used cetyltrimethylammonium hydrogensulfate (CTAHSO₄) as the surfactant or methanol as the co-solvent.     

Selective synthesis of isobutanol by means of the Guerbet reaction: Part 2. Reaction of methanol/ethanol and methanol/ethanol/n-propanol mixtures over copper based/MeONa catalytic systems

The synthesis of isobutanol via the Guerbet condensation between methanol and ethanol was studied by using sodium methoxide (MeONa) as soluble basic component and copper-based catalysts as heterogeneous dehydrogenating/hydrogenating metal species. The effect of the nature of the catalyst and the relative amount of its individual components with respect to the reacting alcohols as well as of temperature on productivity and selectivity of the process was investigated. The collected data indicated that the copper chromite/MeONa was more active than Cu-Raney/MeONa system. The reaction was shown to proceed with the formation only of n-propanol and isobutanol. Ethanol conversion up to 61% with selectivity to isobutanol up to 98.4% was obtained. The same catalytic systems were also employed in the reaction of the methanol/ethanol/n-propanol ternary mixture. Again copper chromite/MeONa resulted more active than the Cu-Raney/MeONa system. Finally, experiments were carried out on methanol/n-propanol mixtures in the presence of the copper chromite/MeONa catalytic system by recycling both the recovered solid copper component and the liquid reaction mixture for evidencing eventual copper leaching by MeONa. On the basis of the obtained results it was concluded that in the Guerbet reaction copper chromite works as heterogeneous catalyst.     

Stabilization of a K+-(bis-Cage-Annulated 20-Crown-6) Complex by Bidentate Picrate

Bis-cage-annulated 18-crown-6 and 20-crown-6 macrocyclic ethers (i.e., 1 and 2, respectively) have been synthesized, and their alkali metal picrate extraction profiles have been determined. Host system 1 proved to be a significantly more avid alkali metal cation complexant than 2 and somewhat more avid than 18-crown-6. Both 1 and 18-crown-6 display modest selectivity toward K⁺ and Rb⁺. A stable host–guest complex was prepared by slow evaporation of a CH₂Cl₂–hexane solution of an equimolar mixture of 2 and potassium picrate. The X-ray crystal structure of this complex reveals that picrate anion functions as a bidentate ligand therein. The gas-phase interaction energy between the 2 K⁺ complex and picrate anion was calculated to be ca. –64.9 kcal mol^–1, thereby indicating that participation of picrate anion as an additional bidentate ligand results in significant stabilization of complex 10.     

Binary and ternary chromium(III) complexes with cellular reductants and DNA components isolated from redox type systems. Part 1. Chromium(VI)–cysteine–adenine (adenosine,ATP)

The reduction of CrO₃ with an excess of L-cysteine and its interaction with DNA fragments (adenine, adenosine) and ATP nucleotide was studied by analysis of the isolated solid products. The precipitates were characterised by elemental analyses, FAB mass spectral data, spectroscopic methods (u.v.–vis., f.i.r., i.r.) and magnetic measurements. The Cr^III complexes obtained appear to be various Cr^III cysteinate and adenine or ATP (but not adenosine) ternary species of the addition type bound through the hydrogen bonding network.     

Liquid chromatographic/electrospray ionization tandem mass spectrometric study of the phenolic composition of cocoa (Theobroma cacao)

Liquid chromatography coupled with ionspray mass spectrometry in the tandem mode (LC/MS/MS) with negative ion detection was used for the identification of a variety of phenolic compounds in a cocoa sample. Gradient elution with water and acetonitrile, both containing 0.1% HCOOH, was used. Standard solutions of 31 phenolic compounds, including benzoic and cinnamic acids and flavonoid compounds, were studied in the negative ion mode using MS/MS product ion scans. At low collisional activation, the deprotonated molecule [M - H](-) was observed for all the compounds studied. For cinnamic and benzoic acids, losses of CO(2) or formation of [M - CH(3)](-*) in the case of methoxylated compounds were observed. However, for flavonol and flavone glycosides, the spectra present both the deprotonated molecule [M - H](-) of the glycoside and the ion corresponding to the deprotonated aglycone [A - H](-). The latter ion is formed by loss of the rhamnose, glucose, galactose or arabinose residue from the glycosides. Different fragmentation patterns were observed in MS/MS experiments for flavone-C-glycosides which showed fragmentation in the sugar part. Fragmentation of aglycones provided characteristic ions for each family of flavonoids. The optimum LC/MS/MS conditions were applied to the characterization of a cocoa sample that had been subjected to an extraction/clean-up procedure which involved chromatography on Sephadex LH20 and thin-layer chromatographic monitoring. In addition to compounds described in the literature, such as epicatechin and catechin, quercetin, isoquercitrin (quercetin-3-O-glucoside) and quercetin-3-O-arabinose, other compounds were identified for the first time in cocoa samples, such as hyperoside (quercetin-3-O-galactoside), naringenin, luteolin, apigenin and some O-glucosides and C-glucosides of these compounds.     

Active media based on SiO2 matrices with incorporated molecules of rhodamine dyes

SiO₂ matrices with incorporated molecules of Rhodamine 6G and Rhodamine 800 laser dyes were synthesized by the sol?Cgel method. The spectral properties of the matrices were studied. It was found that the incorporation of Rhodamine 6G molecules into the xerogel network decreased their association. The influence of the molar ratio of water and formamide on the transparency of the samples was studied. Laser emission of SiO₂ matrices activated with Rhodamine 800 was obtained in the near infrared spectral range. The values of laser spectrum halfwidth of SiO₂ matrices with Rhodamine 6G and Rhodamine 800 are 2?C6?nm. A well-defined structure of the laser emission spectra of the matrices at microsecond pumping duration testifies to their relatively high optical quality.