Comparative study of three immunoassays based on monoclonal antibodies for detection of the pesticide parathion-methyl in real samples

Three immunoassay systems: indirect, direct competitive enzyme-linked immunosorbent assay (IC-ELISA and DC-ELISA), fluorescence polarization immunoassay (FPIA) based on monoclonal antibodies for the detection of parathion-methyl (PM) were developed and optimized. Several PM derivatives (haptens) were conjugated to proteins and fluoresceinthiocarbamyl ethylenediamine (EDF) to obtain immunogens and competitors. The influence of immunogen and competitor structures on the assay performance was investigated. IC-ELISA was the most sensitive of all techniques developed, with a detection limit of 0.08 ng ml⁻¹, but assay time was the longest (3.5 h per 96-well microtitre plate). DC-ELISA was easier to perform and quicker (1.5 h per 96-well microtitre plate) but less sensitive than IC-ELISA (detection limit was 0.5 ng ml⁻¹). FPIA was the fastest and simplest (7 min per 10 samples) but the least sensitive (detection limit was 15 ng ml⁻¹) technique. The methods were characterized by high specificity and reproducibility. The cross-reactivity for parathion-ethyl was around 30-40% for IC-ELISA and FPIA, but significantly higher (125%) for DC-ELISA. The immunoassays were applied to the analysis of PM residues in different food and environmental matrices. Methanol extracts of vegetable, fruit and soil samples were used for the analysis. Recoveries for most spiked samples averaged between 85 and 110%. The methods developed can be used for screening of food and environmental samples for PM residues without complicated clean-up.     

Intrinsically flame retardant epoxy resin - Fire performance and background - Part I

The flame retardant effect of newly synthesized phosphorus-containing reactive amine, which can be used both as crosslinking agent in epoxy resins and as a flame retardant, was investigated. The effect of montmorillonite and sepiolite additives on the fire induced degradation was compared to pristine epoxy resin. The effect of combining the organophosphorous amine with clay minerals was also studied. It could be concluded that the synthesized phosphorus-containing amine, TEDAP can substitute the traditional epoxy resin curing agents providing additionally excellent flame retardancy: the epoxy resins flame retarded this way reach 960 °C GWFI value, 33 LOI value and V-0 UL-94 rating - compared to the 550 °C GWFI value, 21 LOI value and “no rate” UL-94 classification of the reference epoxy resin. The peak of heat release was reduced to 1/10 compared to non-flame retarded resin, furthermore a shift in time was observed, which increases the time to escape in case of fire. The flame retardant performance can be further improved by incorporating clay additives: the LOI and the HRR results showed that the optimum of flame retardant effect of clay additives is around 1 mass% filler level in AH-16-TEDAP system. Applying a complex method for mechanical and structural characterization of the intumescent char it was determined that the flame retarded system forms significantly more and stronger char of better uniformity with smaller average bubble size. Incorporation of clay additives (owing to their bubble nucleating activity) results in further decrease in average bubble diameter.     

Complex formation of certain rare earth metals with 1-(2-pyridylazo)-2-naphthol (PAN) in alcohol-water solutions

The formation ofPAN complexes in the systems:Ln(III)—PAN—alcohol—water [whereLn(III) = Pr, Nd, Sm, Eu, Gd, Tb, alcohol - ethanol andLn(III) = Eu, alcohol =n-propanol, isopropanol] was investigated by a spectrophotometric method. Equilibrium constants for the reactionLn ³⁺+HLLnL ²⁺+H⁺ (HL =PAN) and stability constants of complexesLnL ²⁺ are reported.

---

Komplexbildung einiger Seltenerdmetalle mit 1-(2-Pyridylazo)-2-naphthol (PAN) in alkoholisch-wäßrigen Lösungen

Zusammenfassung Die Bildung der Komplexe vonPAN in den SystemenLn(III)—PAN—Alkohol—Wasser [Ln(III) = Pr, Nd, Sm, Eu, Gd, Tb, Alkohol = Ethanol undLn(III) = Eu, Alkohol =n-Propanol, Isopropanol] wurde mit einer spektrophotometrischen Methode untersucht. Die Gleichgewichtskonstanten der ReaktionenLn ³⁺+HLLnL ²⁺+H⁺ (HL =PAN) und die Stabilitätskonstanten der KomplexeLnL ²⁺ wurden berechnet.

     

Wavelength-dependent electron and energy transfer pathways in a side-to-face ruthenium porphyrin/perylene bisimide assembly

A new side-to-face supramolecular array of chromophores, where a pyridyl-substituted perylene bisimide dye axially binds to two ruthenium porphyrin fragments, has been prepared by self-assembly. The array is formulated as DPyPBI[Ru(TPP)(CO)](2), where DPyPBI = N,N'-di(4-pyridyl)-1,6,7,12-tetra(4-tert-butylphenoxy)perylene-3,4:9,10-tetracarboxylic acid bisimide and TPP = 5,10,15,20-tetraphenylporphyrin. The photophysical behavior of DPyPBI[Ru(TPP)(CO)](2) has been studied by fast (nanoseconds) and ultrafast (femtoseconds) time-resolved techniques. The observed behavior sharply changes with excitation wavelength, depending on whether the DPyPBI or Ru(TPP)(CO) units are excited. After DPyPBI excitation, the strong fluorescence typical of this unit is completely quenched, and time-resolved spectroscopy reveals the occurrence of photoinduced electron transfer from the ruthenium porphyrin to the perylene bisimide dye (tau = 5.6 ps) followed by charge recombination (tau = 270 ps). Upon excitation of the Ru(TPP)(CO) fragments, on the other hand, ultrafast (tau < 1 ps) intersystem crossing is followed by triplet energy transfer from the ruthenium porphyrin to the perylene bisimide dye (tau = 720 ps). The perylene-based triplet state decays to the ground state on a longer time scale (tau = 9.8 micros). The photophysics of this supramolecular array provides remarkable examples of (i) wavelength-dependent behavior (a small change in excitation wavelength causes a sharp switch from electron to energy transfer) and (ii) intramolecular sensitization (the triplet state of the perylene bisimide, inaccessible in the free dye, is efficiently populated in the array).     

Separation and analysis of glycyrrhizin, 18beta-glycyrrhetic acid and 18alpha-glycyrrhetic acid in liquorice roots by means of capillary zone electrophoresis

Glycyrrhizin is the main active compound of Glycyrrhiza glabra root extracts; according to recent studies, glycyrrhizin and its aglycon, glycyrrhetic acid, have interesting therapeutic properties. A new capillary electrophoretic method has been developed for the separation and quantification of glycyrrhizin, beta-glycyrrhetic acid and its isomer a-glycyrrhetic acid. Separation of the analytes was achieved in less than 3 min on a fused silica capillary, by injecting the samples at the short end of the capillary (effective length: 8.5 cm). The background electrolyte was composed of pH 10.0 carbonate buffer, methanol and ethylene glycol (80/10/10) and contained 0.4% beta-cyclodextrin; indomethacin was used as the internal standard. Diode array detection was used, with quantitative assays carried out at 254 nm. Linearity was found over the 5-200 and 2.5-100 microg mL(-1) concentration ranges for glycyrrhizin and glycyrrhetic acid, respectively. This method has been applied to the determination of the analytes in different matrices (liquorice roots and commercial confectionery products), and to the purity control of beta-glycyrrhetic acid obtained from the hydrolysis of glycyrrhizin. When analysing beta-glycyrrhetic acid and its epimer in roots, the samples were purified by means of a suitable solid-phase extraction (SPE) procedure with Oasis HLB cartridges, which granted good selectivity, eliminating matrix interference.     

Characterization of the pores in hydrous ferric oxide aggregates formed by freezing and thawing

Hydrous ferric oxides (HFO) are efficient sorbents for inorganic and organic pollutants and therefore have great potentials in environmental science and engineering applications. Freezing and thawing of HFO suspensions leads to the formation of dense HFO aggregates. It facilitates the handling and increases the drying rate of HFO. In this study, we used a combination of pycnometry, gas adsorption (N(2) gas, water vapor), and small-angle neutron scattering (SANS) to characterize the porosity and pore size distribution of dense HFO aggregates formed by freezing dialyzed HFO suspensions at -25 degrees C and thawing them at room temperature. The crystallinity of the HFO, which was a 2-line ferrihydrite, was not affected by this treatment. Wet sieving and laser diffraction analysis showed that the dense HFO aggregates had a unimodal size distribution with an average diameter of 235+/-35 microm. Increasing the freezing rate by cooling with liquid N(2) (-196 degrees C) resulted in much smaller aggregates with an average diameter of 20 microm. Adding NaNO(3) electrolyte to the HFO suspensions prior to freezing also resulted in the formation of smaller aggregates. The dense HFO aggregates formed at -25 degrees C had a porosity of 0.73+/-0.02 ll(-1). SANS revealed a unimodal size distribution of pores, with an average pore diameter of 2.0 nm. The diameter of the HFO crystallites was estimated by transmission electron microscopy to be 1.9+/-0.5 nm. Geometrical considerations taking into account the unit particle and average pore size suggest that the crystallites retain 1-2 layers of hydration water during the coagulation induced by freezing. Analysis by N(2) gas adsorption showed that drying the dense HFO aggregates induced a reduction in porosity by about 25% and shifted the pore size distribution to smaller diameters. Rewetting during water vapor adsorption did not induce significant changes of the aggregate structure. The specific surface area of the dry HFO aggregates was between 320 and 380 m(2)g(-1).     

Rhodium(I) complexes with 1′-(diphenylphosphino)ferrocenecarboxylic acid as active and recyclable catalysts for 1-hexene hydroformylation

The rhodium complex trans-[Rh(CO)(Hdpf-κP)(dpf-κ²O,P)] (1), (Hdpf = 1′-(diphenylphosphino)ferrocenecarboxylic acid) was used as an efficient and recyclable catalyst for 1-hexene hydroformylation producing ca. 80% of aldehydes at 10 atm CO/H₂ and 80 °C. After the reaction, unchanged complex 1 was separated from the reaction mixture and used again three times with the same catalytic activity. The effect of modifying ligands, phosphines and phosphites, on the reactivity of 1 was investigated. The active catalytic systems containing 1 or trans-[Rh(CO)(L)(dpf-κ²O,P)] (2) were formed in situ from acetylacetonato rhodium(I) precursors [Rh(CO)₂(acac)] (3) or [RhL(CO)(acac)] (4) and Hdpf or Medpf (L = phosphine, Medpf = methyl ester of Hdpf).     

Kinetic parameters from thermogravimetric study of used rubber granulates–polyurethane composites

From the TG data of rubber granulates, different polyurethane and composites it can be seen that the thermal decomposition for the rubber granulate and all of the composites start above 520 K. Two major mass losses for the rubber granulates and majority of the composites were observed and thermal decomposition is essentially complete by ~820 K. The changes of activation energies of lower and higher temperature decomposition, calculated according to the different equations were observed for a priori assumed first-order reaction for devolatilisation. Differences between determined and calculated results could suggest a possible reaction between polyurethane agents and rubber granulate during the composites formations.     

A study of polyamine complex formation with H+, Cu(II), Zn(II), Pb(II), and Mg(II) in aqueous solution

Summary The composition and stability of the following biogenic amine complexes have been investigated: 1,4-diaminobutane(Put), 4-azaoctane-1,8-diamine(Spd), 4,9-diazadodecan-1, 12-diamine(Spm) as well as homologues such as 1,3-diaminopropane(Put3), 4-azaheptane-1, 7-diamine(Spd3,3) and 4,8-diazaundecan-1,11-diamine(Spm3,3,3) with H⁺, Cu(II), Zn(II), Pb(II) and Mg(II). A potentiometric method was used. The VIS technique enabled the determination of coordination mode in copper/amine systems. It was found that Mg(II) does not form coordination compounds with any of the studied polyamines in solution. An increase in the concentration of ligand and metal was found to result in a stronger tendency towards the formation of protonated compounds accompanied by a decrease in the concentration of hydroxocomplexes. At physiologicalpH (7.4) an increase in the concentration of protonated compounds by approximately 15% was observed within the ligand concentration range from 0.001 mol dm^–3 to 0.0001 mol dm^–3 at a Cu(II) concentration of 0.000177 mol dm^–3.

---

Untersuchungen zur Komplexbildung von Polyaminen mit H⁺, Cu(II), Zn(II), Pb(II) und Mg(II) in wäßriger Lösung

Zusammenfassung Anhand einer Analyse von potentiometrischen Daten wurden Zusammensetzung und Beständigkeit folgender biogener Aminkomplexe untersucht: 1,4-Diaminobutan(Put), 4-Azaoktan-1,8-diamin(Spd), 4,9-Diazadodekan-1,12-diamin(Spm), sowie auch deren Homologen 1,3-Diaminopropan(Put3), 4-Azaheptan-1,7-diamin(Spd3,3) und 4,8-Diazaundekan-1,11-diamin(Spm3,3,3) mit H⁺, Cu(II), Zn(II), Pb(II) und Mg(II). Mit Hilfe der VIS-Technik wurde die Koordinationsweise in Kupfer/Amin-Systemen bestimmt. Es wurde festgestellt, daß Mg(II) keine Koordinationsverbindungen mit den untersuchten Polyaminen bildet. Eine höhere Konzentration von Ligand und Metall führte zu stärkerer Tendenz der Bildung protonierter Verbindungen, wobei die Konzentration von Hydroxokomplexen kleiner wurde. Bei physiologischempH (7.4) wurde im Bereich der Ligand-Konzentration von 0.001 mol dm^–3 bis 0.0001 mol dm^–3 bei einer Cu(II)-Konzentration von 0.000177 mol dm^–3 ein Anstieg der Konzentration protonierter Verbindungen um etwa 15% beobachtet.

     

Properties of monolayers of crown ethers bearing an azo and azoxy group in the macrocycle

Two methods are described for preparing monomolecular layers of crown ethers with an azo or azoxy group in the macrocycle. When the molecules used to build the monolayer are soluble in aqueous solutions, adsorptive preconcentration on mercury electrodes was used to prepare the monolayer coating. The monolayer was electroactive due to the presence of the azo or azoxy unit in the molecules. Monolayers of crown ethers bearing an azo group in the macrocycle were shown to recognize alkali metal cations present in the solution. Changes of the parameters of the voltammetric reduction peaks - peak potential and peak width, served as an indication of specific interactions of the monolayer of 13-membered and 16-membered azocrown ethers with Na⁺ and K⁺ cations, respectively.The monolayers capable of recognizing cations have also been prepared on the aqueous solution-air interface, using the Langmuir technique. In this approach, amphiphilic derivatives of the azocrowns were synthesized and the monolayer has been assembled on the subphase containing metal cations. Binding of the cation by the macrocycle has a stabilizing effect on the monolayer and higher collapse pressures are achieved than on the pure water subphase. The monolayer was transferred from the air-water interface on the solid substrate using the Langmuir-Blodgett technique. Thin mercury film electrodes on the Ag substrate, or An films evaporated on glass slides were employed as the electrode substrates. The former gave monolayer modified electrodes of higher stability.Presented at the Sixth International Seminar on Inclusion Compounds, Istanbul, Turkey, 27–31 August, 1995.