Spectroscopy of the hyperfine structure of antiprotonic 4He and 3He

The spin magnetic moment $\mu^{\overline{p}}_{s}$ of the antiproton can be determined by comparing the measured transition frequencies in $\overline{p}^4$ He^?+? with three-body QED calculations. A comparison between the proton and antiproton can then be used as a test of CPT invariance. The highest measurement precision of the difference between the proton and the antiproton spin magnetic moments to date is 0.3%. A new experimental value of the spin magnetic moment of the antiproton was obtained as $\mu^{\overline{p}}_{s} = -2.7862(83)\mu_{N}$ , slightly better than the previously best measurement. This agrees with $\mu^{p}_{s}$ within 0.24%. In 2009, a new measurement with antiprotonic ³He has been started. A comparison between the theoretical calculations and experimental results would lead to a stronger test of the theory and address systematic errors therein. A measurement of this state will be the first HF measurement on $\overline{p}^3$ He^?+?. We report here on the new experimental setup and the first tests.     

Hexadecapolar Kondo effect in URu2Si2?

We derive the coupling of a localized hexadecapolar mode to conduction electrons in tetragonal symmetry. The derivation can be easily adapted to arbitrary multipoles in an arbitrary environment. We relate our model to the two-channel Kondo (2CK) model and show that for an f(2) configuration a relevant crystal field splitting in addition to the 2CK interaction is intrinsic to tetragonal symmetry. We discuss possible realizations of a hexadecapolar Kondo effect in URu(2)Si(2). Solving our model we find good agreement with susceptibility and specific heat measurements in Th(1-x)U(x)Ru(2)Si(2) (x?1).     

Current status of the TwinMic beamline at Elettra: a soft X‐ray transmission and emission microscopy station

The current status of the TwinMic beamline at Elettra synchrotron light source, that hosts the European twin X‐ray microscopy station, is reported. The X‐ray source, provided by a short hybrid undulator with source size and divergence intermediate between bending magnets and conventional undulators, is energy‐tailored using a collimated plane‐grating monochromator. The TwinMic spectromicroscopy experimental station combines scanning and full‐field imaging in a single instrument, with contrast modes such as absorption, differential phase, interference and darkfield. The implementation of coherent diffractive imaging modalities and ptychography is ongoing. Typically, scanning transmission X‐ray microscopy images are simultaneously collected in transmission and differential phase contrast and can be complemented by chemical and elemental analysis using across‐absorption‐edge imaging, X‐ray absorption near‐edge structure or low‐energy X‐ray fluorescence. The lateral resolutions depend on the particular imaging and contrast mode chosen. The TwinMic range of applications covers diverse research fields such as biology, biochemistry, medicine, pharmacology, environment, geochemistry, food, agriculture and materials science. They will be illustrated in the paper with representative results.     

Soliton propagation in tapered silicon core fibers

Numerical simulations are used to investigate soliton-like propagation in tapered silicon core optical fibers. The simulations are based on a realistic tapered structure with nanoscale core dimensions and a decreasing anomalous dispersion profile to compensate for the effects of linear and nonlinear loss. An intensity misfit parameter is used to establish the optimum taper dimensions that preserve the pulse shape while reducing temporal broadening. Soliton formation from Gaussian input pulses is also observed--further evidence of the potential for tapered silicon fibers to find use in a range of signal processing applications.     

Multilayer metal/metal-oxide diffractive structure for photonic temperature sensing

We designed and fabricated multilayer metal/metal-oxide surface relief diffractive grating structures by growing alternating Pt and SnO(x) layers. Optical interrogation at 633 nm reveals the temperature dependence of their reflection and transmission diffractive effects. This function is explored here in the context of a remote, spatially localized, photonic temperature sensing operation, achieving sensitivity of 10% per °C for the zeroth-order in the transmission mode. The experimental demonstration is found to be in good agreement with the results of rigorous coupled wave analysis of the composite metal/metal-oxide element.     

Evolutionary game theory in growing populations

Existing theoretical models of evolution focus on the relative fitness advantages of different mutants in a population while the dynamic behavior of the population size is mostly left unconsidered. We present here a generic stochastic model which combines the growth dynamics of the population and its internal evolution. Our model thereby accounts for the fact that both evolutionary and growth dynamics are based on individual reproduction events and hence are highly coupled and stochastic in nature. We exemplify our approach by studying the dilemma of cooperation in growing populations and show that genuinely stochastic events can ease the dilemma by leading to a transient but robust increase in cooperation.     

Negative normal restitution coefficient found in simulation of nanocluster collisions

The oblique impacts of nanoclusters are studied theoretically and by means of molecular dynamics. In simulations we explore two models--Lennard-Jones clusters and particles with covalently bonded atoms. In contrast with the case of macroscopic bodies, the standard definition of the normal restitution coefficient yields for this coefficient negative values for oblique collisions of nanoclusters. We explain this effect and propose a proper definition of the restitution coefficient which is always positive. We develop a theory of an oblique impact based on a continuum model of particles. A surprisingly good agreement between the macroscopic theory and simulations leads to the conclusion that macroscopic concepts of elasticity, bulk viscosity, and surface tension remain valid for nanoparticles of a few hundred atoms.     

Changes in cerebral activity after decreased upper-limb hypertonus: an EMG-fMRI study

Objective

Whereas several studies have used functional magnetic resonance imaging (fMRI) to investigate motor recovery, whether therapy to decrease post-stroke hypertonus alters central motor patterns remains unclear. In this study, we used continuous electromyography (EMG)-fMRI to investigate possible changes in movement-related brain activation in patients receiving Botulinum toxin (BoNT-A) for hand-muscle hypertonus after chronic stroke.

Methods

We studied eight stroke patients all of whom had hemiparesis and associated upper-limb hypertonus. All patients underwent an fMRI-EMG recording and clinical-neurological assessment before BoNT-A and 5 weeks thereafter. The handgrip motor task during imaging was fixed across both patients and controls. The movements were metronome paced, movement amplitude and force were controlled with a plastic orthosis, dynamometer and EMG recording. An age-matched control group was recruited from among healthy volunteers underwent the same fMRI-EMG recording.

Results

Before BoNT-A, while patients moved the paretic hand, fMRI detected wide bilateral activation in the sensorymotor areas (SM1), in the supplementary motor area (SMA) and cerebellum. After BoNT-A blood oxygenation level-dependent (BOLD) activation decreased in ipsilateral and contralateral motor areas and became more lateralized. BOLD activation decreased also in ipsilateral cerebellar regions and in the SMA.

Conclusion

Changes in peripheral upper-limb hypertonus after BoNT-A were associated to an improvement in active movements and more lateralized and focalized activation of motor areas. The clinical and EMG-fMRI coregistration technique we used to study hand-muscle hypertonus in patients receiving BoNT-A after chronic stroke should be useful in future studies seeking improved strategies for post-stroke neurorehabilitation.     

Angle‐resolved photoemission spectroscopy and imaging with a submicrometre probe at the SPECTROMICROSCOPY‐3.2L beamline of Elettra

The extensive upgrade of the experimental end‐station of the SPECTROMICROSCOPY‐3.2L beamline at Elettra synchrotron light source is reported. After the upgrade, angle‐resolved photoemission spectroscopy from a submicrometre spot and scanning microscopy images monitoring the photoelectron signal inside selected acquisition angle and energy windows can be performed. As a test case, angle‐resolved photoemission spectroscopy from single flakes of highly oriented pyrolitic graphite and imaging of the flakes with image contrast owing to rotation of the band dispersion of different flakes are presented.     

Ultrasound assisted enhancement in natural dye extraction from beetroot for industrial applications and natural dyeing of leather

There is a growing demand for eco-friendly/non-toxic colorants, specifically for health sensitive applications such as coloration of food and dyeing of child textile/leather garments. Recently, dyes derived from natural sources for these applications have emerged as an important alternative to potentially harmful synthetic dyes and pose need for suitable effective extraction methodologies. The present paper focus on the influence of process parameters for ultrasound assisted leaching of coloring matter from plant materials. In the present work, extraction of natural dye from beetroot using ultrasound has been studied and compared with static/magnetic stirring as a control process at 45 °C. The influence of process parameters on the extraction efficiency such as ultrasonic output power, time, pulse mode, effect of solvent system and amount of beetroot has been studied. The use of ultrasound is found to have significant improvement in the extraction efficiency of colorant obtained from beetroot. Based on the experiments it has been found that a mixture of 1:1 ethanol–water with 80 W ultrasonic power for 3 h contact time provided better yield and extraction efficiency. Pulse mode operation may be useful in reducing electrical energy consumption in the extraction process. The effect of the amount of beetroot used in relation to extraction efficiency has also been studied. Two-stage extraction has been studied and found to be beneficial for improving the yield for higher amounts of beetroot. Significant 8% enhancement in % yield of colorant has been achieved with ultrasound, 80 W as compared to MS process both using 1:1 ethanol–water. The coloring ability of extracted beet dye has been tested on substrates such as leather and paper and found to be suitable for dyeing. Ultrasound is also found to be beneficial in natural dyeing of leather with improved rate of exhaustion. Both the dyed substrates have better color values for ultrasonic beet extract as inferred from reflectance measurement. Therefore, the present study clearly offers efficient extraction methodology from natural dye resources such as beetroot with ultrasound even dispensing with external heating. Thereby, also making eco-friendly non-toxic dyeing of fibrous substances a potential viable option.