Fluorescence correlation spectroscopy of water-in-oil microemulsions: an application in specific characterisation of droplets containing biomolecules

Fluorescence correlation spectroscopy (FCS) has been successfully used to characterise water-in-oil (w/o) microemulsions. The investigated systems were stabilised by sodium bis-2-ethylhexyl sulphosuccinate (AOT) and the measured diffusion times have been related to the radii of the aggregated species, which for some systems, were separately determined by small-angle neutron scattering (SANS). We demonstrate that FCS is capable of measuring hydrodynamic radii of microemulsions rapidly and at surfactant concentrations lower than previously reported for other techniques. FCS was also used to specifically interrogate microemulsion droplets containing a fluorescently-labelled biomolecule, specifically phalloidin, a peptide fungal toxin from Amanita phalloides, and the enzyme -chymotrypsin (-CT). The microemulsion droplets are only marginally increased in size if a small peptide (phalloidin) is included in the water phase, whereas the droplet size is significantly increased when a larger protein (-CT) is included.     

Novel antibiotics: second generation macrocyclic peptides designed to trap Holliday junctions

Described are the syntheses of 15 macrocyclic peptides designed to trap Holliday junctions (HJs) in bacteria during site-specific and homologous recombination. This leads to inhibiting bacterial growth. These second generation macrocycles were based on the C-2 symmetrical HJ. They were synthesized using a strategy that permits elucidation of the amino acid role in binding HJs. The syntheses of these macrocycles are an important step in the development of a new class of antibiotics.     

Improving quantitative gas chromatography-electron ionization mass spectrometry results using a modified ion source: demonstration for a pharmaceutical application

Gas chromatography-mass spectrometry is a well established analytical technique. However, mass spectrometers with electron ionization sources may suffer from signal drifts, hereby negatively influencing quantitative performance. To demonstrate this phenomenon for a real application, a static headspace-gas chromatography method in combination with electron ionization-quadrupole mass spectrometry was optimized for the determination of residual dichloromethane in coronary stent coatings. Validating the method, the quantitative performance of an original stainless steel ion source was compared to that of a modified ion source. Ion source modification included the application of a gold coating on the repeller and exit plate. Several validation aspects such as limit of detection, limit of quantification, linearity and precision were evaluated using both ion sources. It was found that, as expected, the stainless steel ion source suffered from signal drift. As a consequence, non-linearity and high RSD values for repeated analyses were obtained. An additional experiment was performed to check whether an internal standard compound would lead to better results. It was found that the signal drift patterns of the analyte and internal standard were different, consequently leading to high RSD values for the response factor. With the modified ion source however, a more stable signal was observed resulting in acceptable linearity and precision. Moreover, it was also found that sensitivity improved compared to the stainless steel ion source. Finally, the optimized method with the modified ion source was applied to determine residual dichloromethane in the coating of coronary stents. The solvent was detected but found to be below the limit of quantification.     

Fabrication of titania and titania–silica aerogels using rapid supercritical extraction

Titania (TiO₂) and titania–silica (TiSi) aerogels are suitable for photocatalytic oxidation of volatile organic compounds for pollution mitigation; however, methods for fabricating these aerogels can be complex. In this work we describe the use of a rapid supercritical extraction (RSCE) technique to prepare TiO₂ and TiSi aerogels in as little as 8 h. The RSCE technique uses a metal mold and a four-step hydraulic hot press procedure to bring the solvents in the sol–gel pores to a supercritical state and control the supercritical fluid release process. Resulting TiO₂ aerogels were powdery with BET surface areas of 130–180 m²/g, pore volumes ~0.5 cm³/g and skeletal densities of 3.6 g/mL. Monolithic TiSi aerogels were made using two different methods. An impregnation process, in which titania precursor was added to a silica sol–gel, took 4–8 days to complete with a 7-h RSCE and resulted in translucent aerogels with high surface area (560–650 m²/g) and pore volume (2.0–2.6 cm³/g), bulk densities ranging from 0.1 to 0.4 g/mL and skeletal densities of 2.3 g/mL. A co-precursor method for preparing TiSi aerogels took 8 h to complete. The precursor chemical mixture was poured directly into the mold and processed in a 7-h RSCE process. The resulting aerogels were opaque, with high surface areas (510–580 m²/g), low bulk density (0.03 g/mL), skeletal densities of 2 g/mL and pore volumes of 2.6–3.5 cm³/g. Preliminary solar simulator studies show that TiO₂ and TiSi aerogels are capable of photocatalytic degradation of methylene blue in aqueous solution.     

Photodecarboxylative addition of carboxylates to phthalimides: a concise access to biologically active 3-(alkyl and aryl)methylene-1H-isoindolin-1-ones

A series of 3-(alkyl and aryl)methyleneisoindolin-1-one derivatives were synthesized in a simple two-step procedure using a recently established photodecarboxylative addition of carboxylates to phthalimides as the key-step. Subsequent acid-catalyzed dehydration and deprotection furnished the desired target compounds with high E-selectivity. The reaction sequence was applied to the synthesis of the known bioactive phenylethylene derivative, AKS-186. Different analogues, including heteroatom-containing isosteres were also synthesized using this approach.     

Synthesis and conformation of fluorinated β-peptidic compounds

Experimental and theoretical data indicate that, for α-fluoroamides, the F-C-C(O)-N(H) moiety adopts an antiperiplanar conformation. In addition, a gauche conformation is favoured between the vicinal C-F and C-N(CO) bonds in N-β-fluoroethylamides. This study details the synthesis of a series of fluorinated β-peptides (1-8) designed to use these stereoelectronic effects to control the conformation of β-peptide bonds. X-ray crystal structures of these compounds revealed the expected conformations: with fluorine β to a nitrogen adopting a gauche conformation, and fluorine α to a C=O group adopting an antiperiplanar conformation. Thus, the strategic placement of fluorine can control the conformation of a β-peptide bond, with the possibility of directing the secondary structures of β-peptides.     

General approach to low-molecular-weight metallogelators via the coordination-induced gelation of an L-glutamate-based lipid

A twin-tailed glutamate-based lipid with a pyridine headgroup was prepared in good yield using standard amide coupling and protection/deprotection chemistry. The resulting Lewis basic lipid gels a wide array of hydrocarbon solvents at a critical gelation concentration (C(g)) of 0.3 wt %. The gelation of more polar solvents, such as ethanol, THF, dichloromethane, and chloroform, occurs with a C(g) of between 2 and 5 wt %, demonstrating the importance of hydrogen bonding interactions in gel formation. The importance of hydrogen bonding in this system was also demonstrated by IR observation of the amide bands, which show a substantial shift upon gelation. Solutions of this new organogelator with concentrations below C(g) rapidly form gels upon the introduction of a wide variety of metal salts or complexes, providing a convenient general method for the preparation of metallogelators. Spectroscopic evidence suggests that the enhanced gelation seen in the metal-containing systems can be explained by a cross-linking of gel fibril aggregates similar to those formed by the unmetalated gelator.     

Multinuclear copper(I) guanidinate complexes

A series of multinuclear Copper(I) guanidinate complexes have been synthesized in a succession of reactions between CuCl and the lithium guanidinate systems Li{L} (L = Me(2)NC((i)PrN)(2) (1a), Me(2)NC(CyN)(2) (1b), Me(2)NC((t)BuN)(2)(1c), and Me(2)NC(DipN)(2) (2d) ((i)Pr = iso-propyl, Cy = cyclohexyl, (t)Bu = tert-butyl, and Dip = 2,6-disopropylphenyl) made in situ, and structurally characterized. The di-copper guanidinates systems with the general formula [Cu(2){L}(2)] (L = {Me(2)NC((i)PrN)(2)} (2a), {Me(2)NC(CyN)(2)} (2b), and {Me(2)NC(DipN)(2)} (2d) differed significantly from related amidinate complexes because of a large torsion of the dimer ring, which in turn is a result of transannular repulsion between adjacent guanidinate substituents. Attempts to synthesis the tert-butyl derivative [Cu(2){Me(2)NC((t)BuN)(2)}(2)] result in the separate formation and isolation of the tri-copper complexes [Cu(3){Me(2)NC((t)BuN)(2)}(2)(μ-NMe(2))] (3c) and [Cu(3){Me(2)NC((t)BuN)(2)}(2)(μ-Cl)] (4c), both of which have been unambiguously characterized by single crystal X-ray diffraction. Closer inspection of the solution state behavior of the lithium salt 1c reveals a previously unobserved equilibrium between 1c and its starting materials, LiNMe(2) and N,N'-di-tert-butyl-carbodiimide, for which activation enthalpy and entropy values of ΔH(?) = 48.2 ± 18 kJ mol(-1) and ΔS(?) = 70.6 ± 6 J/K mol have been calculated using 1D-EXSY NMR spectroscopy to establish temperature dependent rates of exchange between the species in solution. The molecular structures of the lithium complexes 1c and 1d have also been determined and shown to form tetrameric and dimeric complexes respectively held together by Li-N and agostic Li···H-C interactions. The thermal chemistry of the copper complexes have also been assessed by thermogravimetric analysis.     

Simultaneous determination of nitrite and nitrate in human plasma by on-capillary preconcentration with field-amplified sample stacking

A simple method for the determination of nitrite and nitrate in human plasma has been developed using CZE with minimal sample preparation. Field‐amplified sample stacking (FASS) was used to achieve submicromolar detection by dilution of the plasma sample with deionized water. In CZE, the separation of nitrite and nitrate was achieved within 10 min without adding EOF modifier. The optimal condition was achieved with 50 mM phosphate buffer at pH 9.3. The ninefold diluted plasma samples were injected hydrodynamically for 40 s into a 60 cm×75 μm id uncoated fused‐silica capillary. The separation voltage was 20 kV (negative potential) and UV detection was performed at 214 nm. The linearity curves for nitrite and nitrate were obtained by the standard addition method. The estimated LODs for nitrite and nitrate in ninefold diluted plasma sample were 0.05 and 0.07 μM, respectively. The LODs for nitrite and nitrate in original plasma samples were 0.45 and 0.63 μM. The intra‐ and inter‐day precisions for both analytes were <2.6% and the recovery ranged between 92.3 and 113.3%. It was found that nitrite was more stable than nitrate in the plasma after the sample preparation. This proposed method was applied to a number of human plasma samples and the measured nitrite and nitrate concentrations in human plasma were consistent with the literature ranges.