Silk‐Pectin Hydrogel with Superior Mechanical Properties,Biodegradability, and Biocompatibility

A new method is developed to prepare silk hydrogels and silk‐pectin hydrogels via dialysis against methanol to obtain hydrogels with high concentrations of silk fibroin. The relationship between the mechanical and biological properties and the structure of the silk‐pectin hydrogels is subsequently evaluated. The present results suggest that pectin associates with silk molecules when the silk concentration exceeds 15 wt%, suggesting that a silk concentration of over 15 wt% is critical to construct interacting silk‐pectin networks. The silk‐pectin hydrogel reported here is composed of a heterogeneous network, which is different from fiber‐reinforced, interpenetrated networks and double‐network hydrogels, as well as high‐stiffness hydrogels (elastic modulus of 4.7 ± 0.9 MPa, elastic stress limit of 3.9 ± 0.1 MPa, and elastic strain limit of 48.4 ± 0.5%) with regard to biocompatibility and biodegradability.     

Quantification of allantoin and other metabolites of the purine degradation pathway in human plasma samples using a newly developed HILIC-LC-MS/MS method

The development of a simple HILIC-LC-MS/MS method to quantify the plasma levels of allantoin, inosine, hypoxanthine, and adenosine, using stripped plasma for the bioanalytical method validation, was the purpose of this study. Chromatographic separation conducted using an XBridge BEH Amide column (2.1 × 150 mm, 3.5 μm) was achieved under gradient elution with two mobile phases: 0.1% formic acid–ACN (5:95) and 0.1% formic acid–ACN (50:50). Multiple reaction monitoring MS detection was performed using a triple quadrupole. The method validation experiments were performed according to the European Medicines Agency and the U.S. Food and Drug Administration guidelines. The lower LOQ was 50 nM, 5 nM, 20 nM, and 2 nM for allantoin, inosine, hypoxanthine, and adenosine, respectively. The recovery was repeatable and stable. The intraday precision ranged from 1.6% to 6.5%, while the interday precision ranged from 3.4% to 58.7%. Therefore, it is necessary to make a matrix-matched calibration curve each day to overcome this issue. Since the quality control samples’ stability did not always comply with the guidelines, the samples need to be analyzed soon after collection.     

Synergistic effect of nanoionic destabilization and partial dehydrogenation for enhanced ionic conductivity in MBH4-C60 (M = Li+, Na+) nanocomposites

Journal of Solid State Electrochemistry - In this work, we evaluate the electrochemical properties of MBH4-C60 (M = Li+, Na+) nanocomposites for potential use as a solid-state electrolyte in...     

Locating hydrogen atoms in single crystal and uniaxially aligned amino acids by solid-state NMR

We demonstrate a novel method to locate hydrogen atoms in amino acids, which involves measuring the C(alpha)H(alpha) bond vector geometry through orientationally dependent dipolar coupling frequencies measured by Lee-Goldburg cross polarization (LGCP). A 2D LGCP experiment is used to measure the polar angle of the C(alpha)H(alpha) bond vector in a single crystal of the model compound L-alanine. It is also demonstrated that by coupling the 13C(alpha)1H(alpha) LGCP experiment to a 13C(alpha)15N REDOR experiment, one can determine the complete three-dimensional geometry of the C(alpha)H(alpha) and C(alpha)N vectors in a single crystal. These measurements allow for location of hydrogen atoms in crystalline biological macromolecules.     

Cluster fusion-fission dynamics in the Singapore stock exchange

In this paper, we investigate how the cross-correlations between stocks in the Singapore stock exchange (SGX) evolve over 2008 and 2009 within overlapping one-month time windows. In particular, we examine how these cross-correlations change before, during, and after the Sep–Oct 2008 Lehman Brothers Crisis. To do this, we extend the complete-linkage hierarchical clustering algorithm, to obtain robust clusters of stocks with stronger intracluster correlations, and weaker intercluster correlations. After we identify the robust clusters in all time windows, we visualize how these change in the form of a fusion-fission diagram. Such a diagram depicts graphically how the cluster sizes evolve, the exchange of stocks between clusters, as well as how strongly the clusters mix. From the fusion-fission diagram, we see a giant cluster growing and disintegrating in the SGX, up till the Lehman Brothers Crisis in September 2008 and the market crashes of October 2008. After the Lehman Brothers Crisis, clusters in the SGX remain small for few months before giant clusters emerge once again. In the aftermath of the crisis, we also find strong mixing of component stocks between clusters. As a result, the correlation between initially strongly-correlated pairs of stocks decay exponentially with average life time of about a month. These observations impact strongly how portfolios and trading strategies should be formulated.     

The potential energy surface of singlet cyclobutadiene and substituted analogs: a coupled-cluster study

Coupled-cluster investigations (CCSD/cc-pVDZ and CCSD/cc-pVQZ//CCSD/cc-pVDZ) of singlet cyclobutadiene and fifteen-substituted analogs were conducted. A local minimum with a square frame does not exist on their potential surfaces. The well-known rectangular D_2h minimum, the square D_4h transition state, and two additional stationary points were found on cyclobutadiene’s potential surface. This included a transition state with a rhombic carbon ring and C_2h symmetry, separating two equivalent puckered C_2v local minima. The predicted barriers were 19.7 and 19.8 kcal/mol at the CCSD/cc-pVDZ and CCSD/cc-pVQZ//CCSD/cc-pVDZ levels, respectively. The relative strain energies of rectangular D_2h cyclobutadiene and all fifteen-substituted analogs were obtained from isodesmic reactions. Progressive substitution with methyl or BH₂ groups continuously lowers ring strain while increasing substitution with fluorines or trifluoromethyl groups steadily increases ring strain. C₄(BH₂)₄ is 16.6 and 13.3 kcal/mol less strained than cyclobutadiene while C₄F₄ is 17.7 and 21.5 kcal/mol more strained at the levels above. Cyclobutadiene is more strained than both cyclopropene and cyclobutene by 12.2 and 37.0 kcal/mol, respectively. Electron density contours indicate that fluorine substitution raised the electron density especially in the short C=C ring bonds above/below the ring plane (π-electrons) but not in the ring plane (σ-electrons). BH₂-substitutions lower the ring π-electron density with little effect in the ring plane. Methyl substituents have little effect on electron densities. All rings retain a strong bond alternation tendency (rectangular) whether substituted with electron-donating or -attracting groups. One-bond coupling constants and the percent p-character in ring C-to-C and C-to-substituent bonds are described.     

Determination of conditional stability constants for some divalent transition metal ion‐EDTA complexes by electrospray ionization mass spectrometry

Conditional stability constants of coordination complexes comprising divalent transition metals, Cu²⁺, Ni²⁺, Zn²⁺, Co²⁺, and ethylenediaminetetraacetic acid (EDTA) were determined utilizing electrospray ionization mass spectrometry. The deviation of signal response of a reference complex was monitored at addition of a second metal ion. The conditional stability constant for the competing metal was then determined through solution equilibria equations. The method showed to be applicable to a system where Co²⁺ and Zn²⁺ competed for EDTA at pH 5. When Cu²⁺ and Ni²⁺ competed for EDTA, the equilibrium changed over time. This change was shown to be affected in rate and size by the type of organic solvent added. In this work, 30% of either methanol or acetonitrile was used. It was found that if calibration curves are prepared for both metal complexes in solution and the measurements are repeated with sufficient time space, any change in equilibrium of sample solutions will be discovered. Copyright © 2014 John Wiley & Sons, Ltd.     

Fabrication and characterization of TEOS-based silica aerogels prepared using rapid supercritical extraction

Silica aerogels were prepared using the precursor tetraethylorthosilicate (TEOS) via a rapid supercritical extraction (RSCE) method. Multiple consistent batches of monolithic TEOS-based aerogels were fabricated via an 8-h RSCE process. Fabricating TEOS-based aerogels with an RSCE method offers some distinct advantages. One advantage is the relative simplicity of the RSCE approach: liquid precursors are mixed and poured into a metal mold in a hydraulic hot-press, where gelation, aging and extraction of liquid from the pores occur. The precursor recipe employs TEOS, ethanol, water, oxalic acid to catalyze hydrolysis, and ammonia to catalyze the subsequent polycondensation reactions. Another advantage is that reaction of TEOS to form sol gels yields ethanol as a byproduct. A process that releases ethanol, rather than methanol (as in tetramethylorthosilicate (TMOS)-based aerogels) may be more appealing for commercial applications, involving scale-up of the process. The significantly lower cost of TEOS, compared to TMOS, is a considerable advantage. The TEOS-based RSCE aerogels are mesoporous and optically translucent, have bulk densities of 0.099(±0.003) g/cm³ and surface areas of 460(±10) m²/g. Signals observed in infrared and Raman spectra of the aerogels are consistent with Si–O framework bonds. Using scanning electron microscopy imaging, the surface morphology of the aerogel samples was imaged at magnifications up to 150 kX.     

Separation of terbutaline enantiomers in capillary electrophoresis with neutral cyclodextrin-type chiral selectors and investigation of the structure of selector-selectand complexes using nuclear magnetic resonance spectroscopy

The major goal of this study was to determine the affinity pattern of the terbutaline (TB) enantiomers toward α-, β-, γ-, and heptakis(2,3-di-O-acetyl)-β-cyclodextrins and using NMR spectroscopy for the understanding of the fine mechanisms of interaction between the cyclodextrins (CD) and TB enantiomers. It was shown once again that CE in combination with NMR spectroscopy represents a sensitive tool to study the affinity patterns and structure of CD complexes with chiral guests. Opposite affinity patterns of TB enantiomers toward native α- and β-CDs were associated with significant differences between the structure of the related complexes in solution. In particular, the complex between TB enantiomers and α-CD was of the external type, whereas an inclusion complex was formed between TB enantiomers and β-CD. One of the possible structures of the complex between TB and heptakis(2,3-di-O-acetyl)-β-CD (HDA-β-CD) was quite similar to that of TB and β-CD, although the chiral recognition pattern and enantioselectivity of TB complexation with these two CDs were very different.     

A Convergent Total Synthesis of the Death Cap Toxin α‐Amanitin

The toxic bicyclic octapeptide α‐amanitin is mostly found in different species of the mushroom genus Amanita, with the death cap (Amanita phalloides) as one of the most prominent members. Due to its high selective inhibition of RNA polymerase II, which is directly linked to its high toxicity, particularly to hepatocytes, α‐amanitin received an increased attention as a toxin‐component of antibody‐drug conjugates (ADC) in cancer research. Furthermore, the isolation of α‐amanitin from mushrooms as the sole source severely restricts compound supply as well as further investigations, as structure–activity relationship (SAR) studies. Based on a straightforward access to the non‐proteinogenic amino acid dihydroxyisoleucine, we herein present a robust total synthesis of α‐amanitin providing options for production at larger scale as well as future structural diversifications.