The Synthesis and Chemistry of 1,3‐Bridged Polycyclic Cyclopropenes: 8‐Oxatricyclo[3.2.1.02,4]octa‐2,6‐dienes

Three 1,3‐bridged polycyclic cyclopropenes, exo‐8‐oxatricyclo[3.2.1.0^2,4]octa‐2,6‐diene ( 10 ), endo‐8‐oxatricyclo[3.2.1.0^2,4]octa‐2,6‐diene ( 11 ), and exo‐6,7‐benzo‐1,5‐diphenyl‐8‐oxatricyclo[3.2.1.0^2,4]octa‐2,6‐diene ( 12 ), have been synthesized by elimination of 2‐chloro‐3‐trimethylsilyl‐8‐oxatricyclo[3.2.1.0^2,4]‐oct‐6‐enes, 17 , 18 and 30 , which were generated from 1‐chloro‐3‐trimethylsilylcyclopropene with furan and diphenylisobenzofuran. We have demonstrated a facile route to synthesize the highly strained 1,3‐fused polycyclic cyclopropenes, 10 , 11 , and 12 . The stereochemistry of the Diels‐Alder reactions of cyclopropene 16 with furan and DPIBF are different. Cyclopropene 16 was treated with furan to form exo‐exo and endo‐exo adducts (5:2) and treated with DPIBF to generate an exo‐exo adduct. Compounds 10 , 11 and 12 undergo isomerization reactions to form benzaldehyde and phenyl 4‐phenyl‐[1]naphthyl ketone to release strain energies via diradical mechanisms.     

Star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one): Synthesis and characterization

New star‐shaped and photocrosslinked poly(1,5‐dioxepan‐2‐one) (PDXO) has been synthesized through ring‐opening polymerization initiated by SnOct₂/pentaerythritol. The star‐shaped PDXO was end‐functionalized by acrolyol chloride to form acrylate end groups. The end‐functionalized PDXO was photocrosslinked initiated by 2,2‐dimethoxy‐2‐phenylacetophenone. The gel content ranged from 80 to 99%, indicating a high degree of crosslinking. The thermal properties of the star‐shaped PDXO and the photocrosslinked PDXO were analyzed by differential scanning calorimetry. The glass‐transition temperature was determined to approximately ?32 °C for the crosslinked PDXO. The viscosity numbers were determined for star‐shaped PDXO, with reference to linear homologues. The star‐shaped PDXO had lower viscosity numbers than the linear counterparts. The crosslinked PDXO showed a rather hydrophilic surface as compared with other resorbable polyesters. The advancing contact angle was 64 ± 2, and the receding angle was 57 ± 4. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2049–2054, 2002     

NMR and EPR studies of low-spin Fe(III) complexes of meso-tetra-(2,6-disubstituted phenyl)porphyrinates complexed to imidazoles and pyridines of widely differing basicities

A series of bis-axially ligated complexes of iron(III) tetramesitylporphyrin, TMPFe(III), tetra-(2,6-dibromophenyl)porphyrin, (2,6-Br2)4TPPFe(III), tetra-(2,6-dichlorophenyl)porphyrin, (2,6-Cl2)4TPPFe(III), tetra-(2,6-difluorophenyl)porphyrin, (2,6-F2)4TPPFe(III), and tetra-(2,6-dimethoxyphenyl)porphyrin, (2,6-(OMe)2)4TPPFe(III), where the axial ligands are 1-methylimidazole, 2-methylimidazole, and a series of nine substituted pyridines ranging in basicity from 4-(dimethylamino)pyridine (pK(a)(PyH(+)) = 9.70) to 3- and 4-cyanopyridine (pKa(PyH+) = 1.45 and 1.1, respectively), have been prepared and characterized by EPR and 1H NMR spectroscopy. The EPR spectra, recorded at 4.2 K, show "large g(max)", rhombic, or axial signals, depending on the iron porphyrinate and axial ligand, with the g(max) value decreasing as the basicity of the pyridine decreases, thus indicating a change in electron configuration from (d(xy))2(d(xz),d(yz)3 to (d(xz),d(yz))4(d(xy))1 through each series at this low temperature. Over the temperature range of the NMR investigations (183-313 K), most of the high-basicity pyridine complexes of all five iron(III) porphyrinates exhibit simple Curie temperature dependence of their pyrrole-H paramagnetic shifts and beta-pyrrole spin densities, rho(C) approximately 0.015-0.017, that are indicative of the S = 1/2 (d(xy))(2)(d(xz),d(yz))(3) electron configuration, while the temperature dependences of the pyrrole-H resonances of the lower-basicity pyridine complexes (pK(a)(PyH(+)) < 6.00) show significant deviations from simple Curie behavior which could be fit to an expanded version of the Curie law using a temperature-dependent fitting program developed in this laboratory that includes consideration of a thermally accessible excited state. In most cases, the ground state of the lower-basicity pyridine complexes is an S = 1/2 state with a mixed (d(xy))2(d(xz),d(yz))3/(d(xz),d(yz))4(d(xy))1 electron configuration, indicating that these two are so close in energy that they cannot be separated by analysis of the NMR shifts; however, for the TMPFe(III) complexes with 3- and 4-CNPy, the ground states were found to be fairly pure (d(xz),d(yz))4(d(xy))1 electron configurations. In all but one case of the intermediate- to low-basicity pyridine complexes of the five iron(III) porphyrinates, the excited state is found to be S = 3/2, with a (d(xz),d(yz))3(d(xy))1(d(z)2)1 electron configuration, lying some 120-680 cm(-1) higher in energy, depending on the particular porphyrinate and axial ligand. Full analysis of the paramagnetic shifts to allow separation of the contact and pseudocontact contributions could be achieved only for the [TMPFe(L)2]+ series of complexes.     

NMR and EPR studies of the bis(pyridine) and bis(tert-butyl isocyanide) complexes of iron(III) octaethylchlorin

The NMR and EPR spectra of a series of pyridine complexes [(OEC)Fe(L)2]+ (L = 4-Me2NPy, Py, and 4-CNPy) have been investigated. The EPR spectra at 4.2 K suggest that, with a decrease of the donor strength of the axial ligands, the complexes change their ground state from (d(xy))2 (d(xz)d(yz))3 to (d(xz)d(yz))4 (d(xy))1. The NMR data from 303 to 183 K show that at any temperature within this range the chemical shifts of pyrrole-8,17-CH2 protons increase with a decrease in the donor strength of the axial ligands. The full peak assignments of the [(OEC)Fe(L)2]+ complexes of this study have been made from COSY and NOE difference experiments. The pyrrole-8,17-CH2 and pyrroline protons show large chemical shifts (hence indicating large pi spin density on the adjacent carbons which are part of the pi system), while pyrrole-12,13-CH2 and -7,18-CH2 protons show much smaller chemical shifts, as predicted by the spin densities obtained from molecular orbital calculations, both Hückel and DFT; the DFT calculations additionally show close energy spacing of the highest five filled orbitals (of the Fe(II) complex) and strong mixing of metal and chlorin character in these orbitals that is sensitive to the donor strength of the axial substituents. The pattern of chemical shifts of the pyrrole-CH2 protons of [(OEC)Fe(t-BuNC)2]+ looks somewhat like that of [(OEC)Fe(4-Me2NPy)2]+, while the chemical shifts of the meso-protons are qualitatively similar to those of [(OEP)Fe(t-BuNC)2]+. The temperature dependence of the chemical shifts of [(OEC)Fe(t-BuNC)2]+ shows that it has a mixed (d(xz)d(yz))4 (d(xy))1 and (d(xy))2 (d(xz),d(yz))3 electron configuration that cannot be resolved by temperature-dependent fitting of the proton chemical shifts, with a S = 5/2 excited state that lies somewhat more than 2kT at room temperature above the ground state; the observed pattern of chemical shifts is the approximate average of those expected for the two S = 1/2 electronic configurations, which involve the a-symmetry SOMO of a planar chlorin ring with the unpaired electron predominantly in the d(yz) orbital and the b-symmetry SOMO of a ruffled chlorin ring with the unpaired electron predominantly in the d(xy) orbital. A rapid interconversion between the two, with calculated vibrational frequency of 22 cm(-1), explains the observed pattern of chemical shifts, while a favoring of the ruffled conformation explains the negative chemical shift (and thus the negative spin density at the alpha-pyrroline ring carbons), of the pyrroline-H of [TPCFe(t-BuNC)2]CF3SO3 (Simonneaux, G.; Kobeissi, M. J. Chem. Soc., Dalton Trans. 2001, 1587-1592). Peak assignments for high-spin (OEC)FeCl have been made by saturation transfer techniques that depend on chemical exchange between this complex and its bis-4-Me2NPy adduct. The contact shifts of the pyrrole-CH2 and meso protons of the high-spin complex depend on both sigma and pi spin delocalization due to contributions from three of the occupied frontier orbitals of the chlorin ring.     

Kinetic study of cytochrome P450 3A4 activity on warfarin by capillary electrophoresis with fluorescence detection

The use of capillary electrophoresis (CE) for the determination of cytochrome P450 3A4 (CYP3A4) activity with R-warfarin as a substrate was investigated. CYP3A4 activity was determined by the quantitation of the product, 10-hydroxywarfarin, based on separation by CE. The separation conditions were as follows: capillary, 80.5 cm (75 microm i.d., 60 cm effective length); 50 mM sodium phosphate buffer (pH 6.5); 23 kV (90 microA) applied voltage; fluorescence detection, excitation wavelength, 310 nm, emission wavelength, 418 nm; capillary temperature, 37 degrees C. With the developed CYP3A4 activity assay and the Lineweaver-Burk equation, the Michaelis-Menten parameters Km and Vmax for formation of 10-hydroxywarfarin from R-warfarin in the presence of CYP3A4 were calculated to be 166 +/- 12 microM and 713 +/- 14 pmol/min/nmol (or 91.4 pmol/min/mg) CYP3A4, respectively.     

Photoinduced Ligand Redistribution Chemistry of Quadruply Bonded Mo(2)Cl(2)(6-mhp)(2)(PR(3))(2) Complexes

The quadruply bonded metal-metal complexes cis-Mo(2)Cl(2)(6-mhp)(2)(PR(3))(2) (R(3) = Et(3), Me(3), Me(2)Ph, MePh(2); 6-mhp = 2-hydroxy-6-methylpyridinato) photoreact when their solutions are irradiated with visible and near-UV light. The primary photoprocess leads to the ligand redistribution products Mo(2)Cl(3)(6-mhp)(PR(3))(3) and Mo(2)Cl(6-mhp)(3)(PR(3)). In THF at room temperature, these photoproducts are stable and over time they back-react completely to the starting material. Photolysis of cis-Mo(2)Cl(2)(6-mhp)(2)(PR(3))(2) in DMF results in the same products; however, Mo(2)Cl(3)(6-mhp)(PR(3))(3) rapidly decomposes, leaving Mo(2)Cl(6-mhp)(3)(PR(3)) as the only isolable photoproduct. Conversely, when the reaction is carried out in benzene, Mo(2)Cl(6-mhp)(3)(PR(3)) undergoes a slow secondary photoreaction and Mo(2)Cl(3)(6-mhp)(PR(3))(3) is the photoproduct that is isolated. At a given wavelength, the photolysis quantum yield (Phi(p)) increases along the solvent series C(6)H(6) < THF < DMF (Phi(p)(405) = 0.00042, 0.00064, and 0.00097, respectively, for cis-Mo(2)Cl(2)(6-mhp)(2)(PMe(2)Ph)(2)). For a given solvent, Phi(p) increases with decreasing excitation wavelength (Phi(p)(546) = 0.00012, Phi(p)(436) = 0.00035, Phi(p)(405) = 0.00042, Phi(p)(366) = 0.0022, and Phi(p)(313) = 0.0079 in C(6)H(6)). This wavelength dependence of the photoreaction quantum yield in conjunction with the excitation spectrum establishes that the photoreaction does not originate from the lowest energy deltadelta excited state, which possesses a long lifetime and an appreciable emission quantum yield in C(6)H(6), CH(2)Cl(2), THF, and DMF. The photochemistry is instead derived from higher energy excited states with the maximum photoreactivity observed for excitation wavelengths coinciding with absorption features previously assigned to ligand-to-metal charge transfer transitions.     

Characterization of uranium particles produced by hydrolysis of UF6 using SEM and SIMS.

Environmental sampling (ES) is a powerful technique used by safeguards inspectors of the International Atomic Energy Agency and the European Safeguards Office for the detection of undeclared nuclear activities. Since its implementation in the 1990s, ES has proven to be very sensitive and effective. Considering the consequences, the measurements should be carried out under a quality management programme. At the Institute for Reference Materials and Measurements, a new production method is under development for the preparation of reference uranium particles from well-certified UF6, allowing uranium particles with certified isotopic abundances to be prepared that are representative of those found in uranium enrichment facilities. Using an aerosol deposition chamber designed and built for the purpose, particles are formed by the hydrolysis of UF6 and their morphology and (isotopic) composition measured using SEM-EDX and SIMS. The SEM measurements show that by varying the relative humidity of the air in the reaction chamber, the morphology of the particles can be changed. By making a distribution map of the chemical composition of the particles, the relationship between fluorine and uranium as main constituents of the particle could be established. The presence of fluorine is a valuable indicator for the occurrence of nondeclared enrichment activities.     

Reactivity of functional groups on the protein surface: development of epoxide probes for protein labeling

We present the development of new affinity probes for protein labeling based on an epoxide reactive group. Systematic screening revealed that an epoxide functionality possesses the special combination of stability and reactivity which renders it stable toward proteins in solution but reactive on the protein surface outside the active site (proximity-induced reactivity). Highly efficient and selective labeling of purified HCA II (human carbonic anhydrase II) was achieved. For instance, 2 equiv of epoxide probe 9 was sufficient for nearly quantitative labeling of HCA II (>90% yield, 20 h reaction time). MS analysis of the labeled protein revealed that 1 equiv of the probe was attached and that labeling occurred at a single residue (His 64) outside the active site. Importantly, epoxide probe 9 selectively labeled HCA II both in simple protein mixtures and in cellular extracts. In addition to the chemical insight and its relevance to many epoxide-containing natural products, this study generated a promising lead in the development of new affinity probes for protein labeling.     

Rat PXR reporter-gene activity correlates with the induction of CYP3A in rat precision-cut liver slices

Recent studies have suggested that both constitutive androstane receptor (CAR) and pregnane X-receptor (PXR) are involved in the induction of rat liver microsomal cytochrome P-450 (CYP) 2B and 3A through a mechanism called cross-talk. In this study we intend to determine if a PXR-reporter gene assay could be used for the prediction of CYP3A and/or CYP2B induction in rats. The induction of rat CYP2B and CYP3A by nineteen structurally diverse compounds was evaluated by using rat precision-cut liver slices and a rat PXR reporter-gene system. Induction of CYP2B and CYP3A mRNAs in rat liver slices was quantified by real-time polymerase chain reaction. Rat PXR activation was measured by induction of luciferase activity in rat PXR reporter-gene system. Linear regression analysis of the fold of induction of mRNA in liver slices and the fold of luciferase activity in rat PXR reporter-gene system shows that a reasonable correlation (r2 = 0.6) exists between the CYP3A induction and the rat PXR activation. A much lower correlation was observed between CYP2B induction and the rat PXR activation (r2 = 0.1). The results from this study suggest that the PXR may play a major role in the induction of rat CYP3A, but not CYP2B. Therefore, the PXR-reporter gene assay may be useful in a high-throughput screening to predict CYP3A induction in rats.